detection lecteur avec xcdroast
bonjour,
je viens enfin de recompiler mon noyau avec les options de gravure, j'ai
installé xcdroast, et quand je le lance, il me detecte bien mon graveur
en émulation scsi et qui fonctionne (j'ai même pu effacer un cd rw) mais
il ne detecte pas mon lecteur cd, difficile de copier des cd dans ce cas
là. Pourtant, j'arrive bien a monter un cd.
Merci d'avance
yoann
Graveur Memorex SixteenMAX1040
Lecteur LG 52X max
debian sarge kernel 2.4.19
# cat /etc/fstab
[...]
# cdrom
/dev/hdb /cdrom iso9660 ro,user,noauto 0 0
# graveur
/dev/sr0 /grav iso9660 ro,user,noauto 0 0
[...]
# cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: Memorex Model: SixteenMAXX 1040 Rev: TWS1
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 00 Lun: 01
Vendor: Memorex Model: SixteenMAXX 1040 Rev: TWS1
Type: CD-ROM ANSI SCSI revision: 02
# dmesg
Linux version 2.4.19 (root@mistur) (gcc version 2.95.4 20011002 (Debian
prerelease)) #4 SMP mer oct 30 11:20:09 CET 2002
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000017ff0000 (usable)
BIOS-e820: 0000000017ff0000 - 0000000017ff3000 (ACPI NVS)
BIOS-e820: 0000000017ff3000 - 0000000018000000 (ACPI data)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
383MB LOWMEM available.
Advanced speculative caching feature not present
On node 0 totalpages: 98288
zone(0): 4096 pages.
zone(1): 94192 pages.
zone(2): 0 pages.
Kernel command line: BOOT_IMAGE=Woody-2.4.19 ro root=30a hdc=ide-scsi
ide_setup: hdc=ide-scsi
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
[...]
All processors have done init_idle
PCI: PCI BIOS revision 2.10 entry at 0xfb2f0, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 0: assuming transparent
PCI: Using IRQ router VIA [1106/0596] at 00:07.0
Activating ISA DMA hang workarounds.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
Starting kswapd
Journalled Block Device driver loaded
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NTFS driver v1.1.22 [Flags: R/O]
parport0: PC-style at 0x378 [PCSPP(,...)]
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ
SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
HDLC line discipline: version $Revision: 3.3 $, maxframe=4096
N_HDLC line discipline registered.
lp0: using parport0 (polling).
lp0: console ready
ppdev: user-space parallel port driver
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 39
VP_IDE: detected chipset, but driver not compiled in!
VP_IDE: chipset revision 16
VP_IDE: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:DMA, hdd:pio
HPT370A: IDE controller on PCI bus 00 dev 48
HPT370A: detected chipset, but driver not compiled in!
PCI: Found IRQ 11 for device 00:09.0
HPT370A: chipset revision 4
HPT370A: not 100% native mode: will probe irqs later
ide2: BM-DMA at 0xe800-0xe807, BIOS settings: hde:pio, hdf:pio
ide3: BM-DMA at 0xe808-0xe80f, BIOS settings: hdg:pio, hdh:pio
hda: IC35L080AVVA07-0, ATA DISK drive
hdb: LG CD-ROM CRD-8521B, ATAPI CD/DVD-ROM drive
hdc: Memorex SixteenMAXX 1040, ATAPI CD/DVD-ROM drive
hde: IC35L040AVER07-0, ATA DISK drive
hdf: IOMEGA ZIP 100 ATAPI, ATAPI FLOPPY drive
hdg: IBM-DJNA-371800, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
ide2 at 0xd800-0xd807,0xdc02 on irq 11
ide3 at 0xe000-0xe007,0xe402 on irq 11
hda: 160836480 sectors (82348 MB) w/1863KiB Cache, CHS=10011/255/63
hde: 80418240 sectors (41174 MB) w/1916KiB Cache, CHS=79780/16/63
hdg: 35239680 sectors (18043 MB) w/1966KiB Cache, CHS=34960/16/63, UDMA(33)
hdb: ATAPI 52X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.12
ide-floppy driver 0.99.newide
hdf: No disk in drive
hdf: 98304kB, 96/64/32 CHS, 4096 kBps, 512 sector size, 2941 rpm
Partition check:
hda: hda1 hda2 hda3 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 hda12 hda13
hda14 hda15 hda16 hda17 hda18 hda19 hda20 hda21 >
hde: [PTBL] [5005/255/63] hde1 < hde5 hde6 hde7 hde8 hde9 > hde2
hdg: [PTBL] [2193/255/63] hdg1 hdg2 < hdg5 hdg6 >
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
loop: loaded (max 8 devices)
ne2k-pci.c:v1.02 10/19/2000 D. Becker/P. Gortmaker
http://www.scyld.com/network/ne2k-pci.html
PCI: Found IRQ 9 for device 00:0f.0
eth0: RealTek RTL-8029 found at 0xec00, IRQ 9, 00:50:BF:58:11:A4.
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 321M
agpgart: Detected Via Apollo Pro chipset
agpgart: AGP aperture is 64M @ 0xd0000000
ide-floppy driver 0.99.newide
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: Memorex Model: SixteenMAXX 1040 Rev: TWS1
Type: CD-ROM ANSI SCSI revision: 02
Vendor: Memorex Model: SixteenMAXX 1040 Rev: TWS1
Type: CD-ROM ANSI SCSI revision: 02
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
Attached scsi CD-ROM sr1 at scsi0, channel 0, id 0, lun 1
sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[...]
hdb: irq timeout: status=0xd0 { Busy }
hdb: ATAPI reset complete
ISO 9660 Extensions: Microsoft Joliet Level 3
ISOFS: changing to secondary root
ide-scsi: hdc: unsupported command in request queue (0)
end_request: I/O error, dev 16:00 (hdc), sector 64
isofs_read_super: bread failed, dev=16:00, iso_blknum=16, block=32
ISO 9660 Extensions: Microsoft Joliet Level 3
ISOFS: changing to secondary root
attempt to access beyond end of device
0b:00: rw=0, want=33, limit=2
isofs_read_super: bread failed, dev=0b:00, iso_blknum=16, block=32
VFS: busy inodes on changed media.
ISO 9660 Extensions: Microsoft Joliet Level 3
ISOFS: changing to secondary root
ISO 9660 Extensions: Microsoft Joliet Level 3
ISOFS: changing to secondary root
__________________________________________________________________
Haut Débit: Modem offert soit 150,92 euros remboursés sur le Pack eXtense de Wanadoo !
Profitez du Haut Débit à partir de 30 euros/mois : http://www.ifrance.com/_reloc/w
Reply to: