Re: besoin d'aide pour config de modem alcatel speed touch usb sur debian
Plusieurs choses étonnantes, d'abord ppp1 est utilisé, puis ppp0 et pppoa
gueule en disant qu'un processus existe déjà.
Ce qui suit ressemble à ce qui se passe quand on se fait jeter pas FT
(impossible puisque ça marche par Windows si je comprends bien)
> Oct 29 09:26:01 mobilehome pppd[3920]: Child process
> /usr/local/sbin/pppoa3 -m 1 -c -vpi 8 -vci 35 (pid 40
> 92) terminated with signal 15
> Oct 29 09:26:01 mobilehome pppd[4034]: Using interface ppp1
> Oct 29 09:26:01 mobilehome pppd[4034]: Connect: ppp1 <--> /dev/pts/2
> Oct 29 09:26:01 mobilehome pppd[4034]: sent [LCP ConfReq id=0x1
<asyncmap
> 0x0> <magic 0x7c2c8afc>]
> Oct 29 09:26:01 mobilehome pppd[3920]: sent [LCP ConfReq id=0x24
<asyncmap
> 0x0> <magic 0x53d9a12d>]
> Oct 29 09:26:01 mobilehome pppd[3920]: rcvd [LCP ConfAck id=0x24
<asyncmap
> 0x0> <magic 0x53d9a12d>]
> Oct 29 09:26:03 mobilehome pppd[3920]: Modem hangup
> Oct 29 09:26:03 mobilehome pppd[3920]: Connection terminated.
> Oct 29 09:26:03 mobilehome pppd[3920]: Exit.
> Oct 29 09:26:04 mobilehome pppd[4034]: sent [LCP ConfReq id=0x1
<asyncmap
> 0x0> <magic 0x7c2c8afc>]
> Oct 29 09:26:28 mobilehome last message repeated 8 times
> Oct 29 09:26:31 mobilehome pppd[4034]: LCP: timeout sending
Config-Requests
> Oct 29 09:26:31 mobilehome pppd[4034]: Connection terminated.
> Oct 29 09:26:31 mobilehome pppd[4034]: using channel 34
> Oct 29 09:26:31 mobilehome pppoa3[4103]: PPPoA3 version 1.1 started by
root
> (uid 0)
> Oct 29 09:26:31 mobilehome pppoa3[4103]: A previous instance seems to be
> running
> Oct 29 09:26:31 mobilehome pppoa3[4103]: Sending the kill signal to 4092
and
> waiting...
> Oct 29 09:26:31 mobilehome pppd[4034]: Using interface ppp0
> Oct 29 09:26:31 mobilehome pppd[4034]: Connect: ppp0 <--> /dev/pts/3
> Oct 29 09:26:32 mobilehome pppd[4034]: sent [LCP ConfReq id=0x2
<asyncmap
> 0x0> <magic 0x67b46921>]
> Oct 29 09:27:00 mobilehome last message repeated 9 times
> Oct 29 09:27:03 mobilehome pppd[4034]: LCP: timeout sending
Config-Requests
> Oct 29 09:27:03 mobilehome pppd[4034]: Connection terminated.
Il y a un problème à ce niveau, soit que FT a un problème, soit que ton
modem est mal configuré.
> rep:/#ifconfig ppp0
> ppp0 Link encap:Point-to-Point Protocol
> POINTOPOINT NOARP MULTICAST MTU:1500 Metric:1
> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:3
> RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
>
Il n'y a pas de liaison ppp: pppd est en attente mais pas d'IP indqiqué:
Une liaison ppp effective donne
ppp0 Lien encap:Protocole Point-à-Point
inet adr:80.14.116.61 P-t-P:80.14.116.1 Masque:255.255.255.255
<<------ là
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1
RX packets:335727 errors:0 dropped:0 overruns:0 frame:0
TX packets:489880 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:3
RX bytes:25844497 (24.6 Mb) TX bytes:441683420 (421.2 Mb)
As tu dans ton syslog des lignes indiquant le lancement du modem (avec
clignotement des leds, etc) du type
Oct 28 23:14:45 cerbere kernel: usbdevfs: USBDEVFS_BULK failed dev 2 ep
0x85 len
512 ret -110
Oct 28 23:14:48 cerbere kernel: usb_control/bulk_msg: timeout
Oct 28 23:14:48 cerbere kernel: usbdevfs: USBDEVFS_CONTROL failed dev 2
rqt 192
rq 18 len 8 ret -110
Oct 28 23:14:50 cerbere kernel: usb_control/bulk_msg: timeout
Oct 28 23:14:50 cerbere kernel: usbdevfs: USBDEVFS_CONTROL failed dev 2
rqt 192
rq 18 len 8 ret -110
Oct 28 23:15:05 cerbere kernel: HDLC line discipline: version $Revision:
3.3 $,
maxframe=4096
Oct 28 23:15:05 cerbere kernel: N_HDLC line discipline registered.
Oct 28 23:15:06 cerbere pppd[326]: pppd 2.4.1 started by root, uid 0
Oct 28 23:15:06 cerbere pppd[326]: Couldn't open pty slave /dev/pts/0: No
such f
ile or directory
Oct 28 23:15:06 cerbere pppd[326]: using channel 1
Oct 28 23:15:07 cerbere pppd[326]: Using interface ppp0
Oct 28 23:15:07 cerbere pppd[326]: Connect: ppp0 <--> /dev/ttyp0
Oct 28 23:15:07 cerbere pppoa2[331]: Starting PPPoA2 ( merged version
includes n
ew ATM/AAL5 stack ) 1_0
Oct 28 23:15:07 cerbere pppoa2[331]: I'm the parent process, I handle
the endp
oint 0x07
....
FB
Reply to: