Re: problème réseau [Long]
On Tue, Mar 12, 2002 at 16:27:28 +0100, Nicolas Bertolissio wrote:
> sur le PowerBook :
> ~# ifconfig
> eth0 Lien encap:Ethernet HWaddr 00:03:93:75:2B:AE
> inet adr:192.168.0.8 Bcast:192.168.0.255 Masque:255.255.255.0
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> TX packets:54 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:100
> RX bytes:0 (0.0 b) TX bytes:2268 (2.2 KiB)
> Interrupt:41
>
> lo Lien encap:Local Loopback
> inet adr:127.0.0.1 Masque:255.0.0.0
> UP LOOPBACK RUNNING MTU:16436 Metric:1
> RX packets:61 errors:0 dropped:0 overruns:0 frame:0
> TX packets:61 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:0
> RX bytes:6240 (6.0 KiB) TX bytes:6240 (6.0 KiB)
> ~# route
> Table de routage IP du noyau
> Destination Passerelle Genmask Indic Metric Ref Use Iface
> 192.168.0.1 * 255.255.255.255 UH 0 0 0 eth0
> localnet * 255.255.255.0 U 0 0 0 eth0
C'est bizarre comme config. Je n'y connaît pas grand chose, mais
la première ligne semble au moins inutile.
Chez moi:
[Sur 192.168.0.3]
ay:~> route -n <17:27:31
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth0
> Je cherche à me connecter à l'internet du PowerBook via le PC, en
> ajouant le PC comme passerelle ça ne fonctionne pas,
C'est pourtant bien ce qu'il faut faire.
> ce qui ne m'étonne
> pas car avec la configuration décrite ci-dessus, le PowerBook dir :
> ~# telnet 192.168.0.1 23
> Trying 192.168.0.1...
> telnel: Unable to connect to remote host: No route to host
Aucune idée là-dessus.
--
Vincent Lefèvre <vincent@vinc17.org> - Web: <http://www.vinc17.org/> - 100%
validated (X)HTML - Acorn Risc PC, Yellow Pig 17, Championnat International
des Jeux Mathématiques et Logiques, TETRHEX, etc.
Work: CR INRIA - computer arithmetic / SPACES project at LORIA
Reply to: