[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: SCANNER HP ScanJet 5p



Merci Joël. J'ai réussi à installer le scanner ave xsane
à+
Hervé

Joel Fernandez wrote:
> 
> Salut RV,
> As-tu bien les /dev/sg**
> Sinon, tu fais un MAKEDEV sg et ils devraient
> apparaître.
> Ensuite, es-tu sûr que ton scanner soit supporté ?
> Enfin, sans vouloir être vulgaire, as-tu lu le man
> de xsane et de sane-scsi ainsi que sane-hp.
> 
> on y apprend plusieurs choses et notamment:
> 
>        When  using a SCSI scanner, ensure that the
> access permis­
>        sion for the generic SCSI device is set
> appropriately.  We
>        recommend  to  add  a  group "scanner" to
> /etc/group which
>        contains all users that should have access to
> the scanner.
>        The  permission  of the device should then be
> set to allow
>        group read and write access.  For example, if
> the  scanner
>        is at generic SCSI device /dev/sge, then the
> following two
>        commands would set the permission correctly:
> 
>               $ chgrp scanner /dev/sge
>               $ chmod 660 /dev/sge
>               $ adduser toi scanner
> 
> Si toutefois c'est bien en sge qu'il faiile déclarer
> ton scanner.
> Pour le mien (UMAX Astra 1220S) c'était sg0.
> 
> J'espère que ça t'aidera un peu.
> 
> A +
> 
> jo
> 
> On Mon, Hervé THIBAUD <herve.thibaud@free.fr> wrote:
> 
> > installé :
> > Une carte SCSI sym53c416
> > Initialisation de la carte SCSI dans modconf:
> > Affectation d'une adresse et d'une irq
> > ...
> > sym53c416: Version 1.0.0-ac
> > sym53c416: ISAPnP card found and configured at 0x220,
> > IRQ 10.
> > No sym53c416 found at address 0x000
> > Symbios Logic 53c416 (rev. 151) at 0x220, irq 10,
> > SCSI-ID 7, fast pio
> > Vendor: HP        Model: C5110A            Rev: 3701
> > Type:   Processor                          ANSI SCSI
> > revision: 02
> > ...
> >
> > Le scanner est connecté (et fonctionne sous windows)
> > la commande : hpscanpbm
> > donne le message : No HP ScanJet found
> >
> > Qu'est ce qu'il peut manquer s.v.p. pour que le
> > scanner soit détecté? Il
> > y a-t-il autre chose à ajouter concernant la carte ou
> > le scanner.
> > Merci
> >
> >
> > --
> > To UNSUBSCRIBE, email to
> > debian-user-french-request@lists.debian.org
> > with a subject of "unsubscribe". Trouble? Contact
> > listmaster@lists.debian.org
> >
> 
> ______________________________________________________________________________
> ifrance.com, l'email gratuit le plus complet de l'Internet !
> vos emails depuis un navigateur, en POP3, sur Minitel, sur le WAP...
> http://www.ifrance.com/_reloc/email.emailif
> 
> --
> To UNSUBSCRIBE, email to debian-user-french-request@lists.debian.org
> with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org



Reply to: