Vielen Dank für die Mühe, Kai. Aber trotzdem hat sich nichts
geändert, obwohl ich die ipppd.ippp0 jetzt genauso habe wie Du.
Ganz im Gegenteil: Die Fehlermeldungen sind sogar noch mehr
geworden. Any hints?
Ich bin auch gerne bereit, mich tiefer in die Materie einzuarbeiten.
Deswegen wäre ich für eine gute Doku dankbar. Das "Debian
GNU/Linux Anwenderhandbuch" ist in dieser Hinsicht zu kurz
gehalten und das ISDN-HOWTO ist (meiner Ansicht nach) zu
SuSE-lastig.
Danke Lars
--
/"\ ASCII Ribbon Campaign
\ /
X No HTML in
/ \ email & news
# Options file for ipppd. # ipppd will not read /etc/ppp/options or /etc/ppp/ioptions or any other # config file. Everything has to be in here. # REMOVE the next line once configuration is complete ######################### # REMOVE the above line once configuration is complete ######################## # "peer" is the name for our syncppp partner. # STANDARD OPTIONS debug # enable debugging #kdebug X # set kernel debugging level to X #nodetach # (no) fork to the background #callback X # ask for callback (parameter X ?) #lock # create a lock file for device #domain X # add domain X to a given hostname #pidfile X # save pid in file X #call X # take options from privileges file (???) #idle X # idle time limit (seconds) #holdoff X # holdoff time limit (seconds) #maxconnect X # set maximum connection time (in seconds ?) #+mp # enable multi line ppp #+pwlog # log password (WARNING: possible security hole) nomagic # magic number negotiation # ppp handshake : tuning #silent # don't even try to initiate the connection #passive # wait for the peer to initiate the connection #lcp-echo-failure X # consecutive echo failures #lcp-echo-interval X # time for lcp echo events #lcp-restart 1 # !!Set timeout for LCP #lcp-max-terminate X # Set max #xmits for term-reqs #lcp-max-configure X # Set max #xmits for conf-reqs #lcp-max-failure X # Set max #conf-naks for LCP # AUTHENTICATION name MEINE_KENNUNG # set local name for auth XXX_ #user X # set name for auth with peer; default is value for name #usehostname # use hostname for auth #remotename X # set remote name for auth noauth # !!(dont) require peer (the other) to auth #require-pap # allow only pap authentication (dialin only) #require-chap # allow only chap authentication (dialin only) #login # use system password database for pap #papcrypt # pap passwords are encrypted # AUTHENTICATION TUNING #pap-restart X # Set retransmit timeout for PAP #pap-max-authreq X # Set max #xmits for auth-reqs #pap-timeout X # Set time limit for peer PAP auth. #chap-restart X # Set timeout for CHAP #chap-max-challenge X # Set max #xmits for challenge #chap-interval X # Set interval for rechallenge # COMPRESSION #noaccomp # address compression on/off #nopcomp # protocol field compression on/off #novj # van jacobsen compression on/off #novjccomp # van jacobsen connection-ID compression on/off #vj-max-slots X # tune maximum vj header slots #nobsdcomp # bsd compression on/off #nodeflate # deflate compression on/off #nopredictor1 # predictor1 compression in/off #noccp # !!compression negotation on/off nolzs # LZS compression off (not yet supported fully) # IP NETWORKING #noip # en/disable ip transfer #X:Y # set local ip to X, remote ip to Y noipdefault # don't use name for default ip addr #useifip # use ip addresses form interface #usefirstip # use first ip from auth file for remote #netmask 255.255.255.255 # !!!set netmask, 255.255.255.255 is for pointopoint defaultroute # !!(dont) set default route #nohostroute # !!dont set host route #noproxyarp # (dont) set an proxy arp entry #mru X # set maximum size of recive units to X #default-mru # disable mru negotation #mtu 1500 # !!set maximum size of transmit units to X (1500 is OK) #useifmtu # use mtu from interface #ipparam X # set ip parameters in script X #ms-dns X # dns address for the peers use (dialin only) #ms-wins X # wins address for the peers use (dialin only) #ms-get-dns # accept peers suggestion of dns address (dialout) #set_userip # define valid ip addresses in /etc/ppp/useriptab #ipcp-restart X # Set timeout for IPCP #ipcp-max-terminate X # Set max #xmits for term-reqs #ipcp-max-configure X # Set max #xmits for conf-reqs #ipcp-max-failure X # Set max #conf-naks for IPCP ipcp-accept-local # Accept peer's address for us ipcp-accept-remote # Accept peer's address for it # IPX NETWORKING noipx # !!en/disable ipx #ipx-network X # IPX network number #ipxcp-accept-network # Accept peer netowrk #ipx-node X # IPX node number #ipxcp-accept-local # Accept our address #ipxcp-accept-remote # Accept peer's address #ipx-routing X # IPX routing proto number #ipx-router-name X # IPX router name #ipxcp-restart X # Set timeout for IPXCP #ipxcp-max-terminate X # max #xmits for term-reqs #ipxcp-max-configure X # max #xmits for conf-reqs #ipxcp-max-failure X # max #conf-naks for IPXCP
Attachment:
SYSLOG
Description: Binary data