[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

[Debian]: ISDN im Kernel



Hallo zusammen,

ich habe mir aus den Quellen des 2.3.2er Kernels meinen eigenen
zusammengestellt und dabei zu meiner Freude festgestellt dass er jetzt
eincompilierbare Unterstuetzung fuer ISDN enthaelt. 
Also habe Ich folgendes activiert: 

<*> ISDN support
[*] Support synchronous PPP
[*] Use VJ-compression with synchronous PPP
[*] Support generic MP (RFC 1717)
[*] Support audio via ISDN
<*> HiSax SiemensChipSet driver support
[*] HiSax Support for EURO/DSS1
[*] Support for german tarifinfo 
[*] HiSax Support for AVM A1 (Fritz)

Meine ISDN Karte ist eine AVM Fritz!Card-Classic (die mit Jumpern fuer die
io-Adresse) und ist auf io=200 gejumpert.
Wenn ich jetzt einfachso boote bekomme ich folgende Meldung:

ISDN subsystem Rev: 1.55/1.47/1.55/1.33/1.10/1.2
HiSax: Driver for Siemens chip set ISDN cards
HiSax: Version 2.8
HiSax: Revisions 2.18/2.7/2.5/2.13/2.7
HiSax: Card 1 Protocol EDSS1 Id=EDSS1 (0)
HiSax: AVM driver Rev. 2.7
AVM A1: Byte at 1b40 is ff
AVM A1: Byte at 1b43 is ff
AVM A1: Byte at 1b42 is ff
AVM A1: Byte at 1b40 is ff
HiSax: AVM A1 config irq:10 cfg:0x1B40
HiSax: isac:0x1740/0x1340
HiSax: hscx A:0x740/0x340  hscx B:0xF40/0xB40
AVM A1: ISAC version : 2085 V2.3
AVM A1: HSCX version A: ???  B: ???
AVM A1: wrong HSCX versions check IO address 
HiSax: Card AVM A1 not installed !                

Der Hisax Treiber scheint die I/O-Adresse nicht herausfinden zu koennen,
also habe ich versucht sie ihm ueber Boot-Parameter zuzuweisen:

----------------------8<-------------
#/etc/lilo.conf

boot=/dev/hda
root=/dev/hda3
install=/boot/boot.b
map=/boot/map
vga=normal
delay=20
default=OldLinux
append = "hisax=5,EDSS1,irq=10,io=0x200,Fritz"  <--- stimmt der Syntax ???

image=/boot/vmlinuz-2.3.2
        label=Linux
        read-only

----------------------8<--------------

Als Modul hatt alles bestens gefunzt, was mache ich falsch ??? }:-(
Any hints ??

-- 
Markus.Hubig@gscalw.cw.bw.schule.de
               
                     "You dont have to be mad to use LinuX.
				But it helps !!"
------------------------------------------------
Um sich aus der Liste auszutragen schicken Sie
bitte eine E-Mail an majordomo@jfl.de die im Body
"unsubscribe debian-user-de <deine emailadresse>"
enthaelt.
Bei Problemen bitte eine Mail an: Jan.Otto@jfl.de
------------------------------------------------
Anzahl der eingetragenen Mitglieder:     739


Reply to: