[Debian]: Farbtiefe einstellen - Miro 22SD
Hallo Debian-Nutzer,
ich habe eine Miro Crystal 22SD Grafikkarte.
Unabhaengig davon, ob ich den S3-Server mit
startx -bpp 8 oder startx -bpp 16 hochfahre,
erhalte ich folgende Meldung:
(--) S3: PCI: Trio32/64 rev 0, Linear FB @ 0xe0000000
(--) S3: chipset: Trio64 rev. 30
(--) S3: chipset driver: mmio_928
(--) S3: card type: PCI
(**) S3: videoram: 2048k
(--) S3: Ramdac type: s3_trio64
(--) S3: Ramdac speed: 135 MHz
(--) S3: Using Trio32/64 programmable clock (MCLK 53.693 MHz)
(--) S3: Maximum allowed dot-clock: 135.000 MHz
(**) S3: Mode "1280x1024": mode clock = 110.000
(**) S3: Mode "1024x768": mode clock = 85.000
(**) S3: Mode "800x600": mode clock = 69.650
(**) S3: Mode "640x480": mode clock = 45.800
(--) S3: Operating RAMDAC in pixel multiplex mode
(--) S3: Using 6 bits per RGB value
^^^^^^^^^^^^
(--) S3: Virtual resolution set to 1280x1024
(--) S3: Local bus LAW is 0xE0000000
(--) S3: Using a banksize of 2048k, line width of 1280
(--) S3: Using a single 64x64 area at (1216,1025) for expanding pixmaps
(--) S3: Using 8 planes of 1216x613 at (0,1025) aligned 8 as font cache
Mit welcher Option / Einstellung kann ich die Farbtiefe veraendern?
Vielen Dank im Voraus fuer euere Tips.
Mit besten Gruessen
Frank Dalchow
------------------------------------------------
Um sich aus der Liste auszutragen schicken Sie
bitte eine E-Mail an majordomo@jfl.de die im Body
"unsubscribe debian-user-de <your_email_address>"
enthaelt.
Bei Problemen bitte eine Mail an: Jan.Otto@jfl.de
------------------------------------------------
Anzahl der eingetragenen Mitglieder: 237
Reply to: