Re: 2nd ethernet card

[Mustafa Celik <mustafa.celik@sympatico.ca>]

Sereciya,
Both of them are actually 3Com, and they get initialized successfully. 
Here's dmesg output for the cards:

   isapnp: Scanning for PnP cards...
   isapnp: No Plug & Play device found
   eth0: 3c5x9 at 0x300, 10baseT port, address  00 20 af 5e f1 2a, IRQ 9.
   3c509.c:1.18a 17Nov2001becker@scyld.com
   http://www.scyld.com/network/3c509.html
   eth1: 3c5x9 at 0x210, 10baseT port, address  00 60 97 69 08 26, IRQ 10.
   3c509.c:1.18a 17Nov2001becker@scyld.com
   http://www.scyld.com/network/3c509.html
   Creative EMU10K1 PCI Audio Driver, version 0.18, 10:29:21 Apr 14 2002
   PCI: Found IRQ 11 for device 00:0b.0
   PCI: Sharing IRQ 11 with 00:13.0
   PCI: Sharing IRQ 11 with 00:13.1




Sereciya Kurdistani wrote:

> Hello Mustafa,
>
> On Mon, Apr 07, 2003 at 04:45:35PM -0400, Mustafa Celik wrote:
>  
>
> > Hi,
> > I've installed the 2nd ethernet card (eth1) to my box, but could not 
> > make it hook up with my hub, i.e. I can't apply ifconfig on it,  eth0 
> > works perfectly as it used to.
> >
> > Module                  Size  Used by    Tainted: P
> > ppp_deflate            38944   0  (autoclean)
> > bsd_comp                3936   0  (autoclean)
> > ppp_async               6464   1  (autoclean)
> > ppp_generic            18728   3  (autoclean) [ppp_deflate bsd_comp 
> > ppp_async]
> > slhc                    4432   0  (autoclean) [ppp_generic]
> > emu10k1                55712   1
> > sound                  52876   0  [emu10k1]
> > ac97_codec              9568   0  [emu10k1]
> > soundcore               3236   7  [emu10k1 sound]
> > 3c509 <<<<<<<<<<<<<<<<< 7968   1 <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
> > isa-pnp <<<<<<<<<<<<<< 27432   0  [3c509] <<<<<<<<<<<<<<<<<<<<<
> > video1394              14916   0  (unused)
> > raw1394                 6384   0  (unused)
> > ohci1394               14912   1  [video1394]
> > ieee1394               23528   0  [video1394 raw1394 ohci1394]
> > keybdev                 1664   0  (unused)
> > usbkbd                  2848   0  (unused)
> > input                   3072   0  [keybdev usbkbd]
> > usb-uhci               20708   0  (unused)
> > usbcore                48032   0  [usbkbd usb-uhci]
> > ide-scsi                7488   0
> > parport_pc             25704   1  (autoclean)
> > lp                      6912   0  (autoclean)
> > parport                21728   1  (autoclean) [parport_pc lp]
> >    
>
>  Is the new ethernet card a 3com too?  I only see on eth driver here,
>  "3c509".  If it isn't, let us know.
>
>