Package: tex-common,texlive-binaries
Version: 2009-7
Severity: serious
User: debian-qa@lists.debian.org
Usertags: piuparts piuparts.d.o
Hi,
during a test with piuparts I noticed some packages fail to install if
tex-common and texlive-binaries are to be installed together. I dont fully
understand why this happens, but hope we can together figure out what
happens, and reassign this bug to the right package.
From the attached log of mftrace (scroll to the bottom...):
Setting up tex-common (2.06) ...
[...]
Running mktexlsr. This may take some time... done.
No packages found matching texlive-base.
dpkg: error processing tex-common (--configure):
subprocess installed post-installation script returned error exit status 1
dpkg: dependency problems prevent configuration of texlive-binaries:
texlive-binaries depends on tex-common (>= 2.00); however:
Package tex-common is not configured yet.
dpkg: error processing texlive-binaries (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of piuparts-depends-dummy:
piuparts-depends-dummy depends on texlive-base-bin; however:
Package texlive-base-bin is not installed.
Package texlive-binaries which provides texlive-base-bin is not configured
yet.
dpkg: error processing piuparts-depends-dummy (--configure):
dependency problems - leaving unconfigured
Errors were encountered while processing:
tex-common
texlive-binaries
piuparts-depends-dummy
E: Sub-process /usr/bin/dpkg returned an error code (1)
Alone, both packages install fine:
http://piuparts.debian.org/squeeze/source/t/tex-common.html
http://piuparts.debian.org/squeeze/source/t/texlive-bin.html
At least the following packages are affected:
sid/fail/lilypond-data_2.12.3-7.log
sid/fail/tex4ht_20090611-1.1.log
squeeze/fail/dvipng_1.12-3.log
squeeze/fail/fig2sty_1
squeeze/fail/itrans-fonts_5.3-8.log
squeeze/fail/latex-cjk-japanese-wadalab_0.20050817-15.log
squeeze/fail/maxima-emacs_5.21.1-2.log
squeeze/fail/mftrace_1.2.16-1.log
squeeze/fail/m-tx_0.60c-1.log
squeeze/fail/musixtex-slurps_92a-7.log
squeeze/fail/tex4ht-common_20090611-1.log
Please cc: me on replies.
cheers,
Holger
Start: 2010-02-25 14:29:11 UTC
Package: mftrace
Priority: extra
Section: tex
Installed-Size: 172
Maintainer: Julian Gilbey <jdg@debian.org>
Architecture: amd64
Version: 1.2.16-1
Depends: python, python-central (>= 0.6.11), potrace | autotrace, t1utils, texlive-base-bin, libc6 (>= 2.7)
Suggests: fontforge, ghostscript
Filename: pool/main/m/mftrace/mftrace_1.2.16-1_amd64.deb
Size: 45252
MD5sum: e909eea099f902ced53fd6b36aa15826
SHA1: 00e06a0e7d257c3bc66926724ad70befaf9da491
SHA256: e71c453b2bc22466ddd668d917a06396a4c0b96c6243f45aa916ca608ecc46c9
Description: Converts Metafont fonts into Type1 fonts
mftrace is a small Python program that lets you trace a TeX bitmap
font (a METAFONT font) into a PFA or PFB font (A PostScript Type1
Scalable Font).
.
Type1 fonts offer many advantages over bitmaps, as they allow
PostScript files to render correctly on printers with many resolutions.
Moreover, Ghostscript can generate much better PDF, if given scalable
fonts.
Python-Version: current
Tag: implemented-in::python, interface::commandline, role::program, use::converting, works-with::font
Executing: sudo /org/piuparts.debian.org/sbin/piuparts --warn-symlinks --warn-on-others --warn-on-leftovers-after-purge --scriptsdir /etc/piuparts/scripts/ --tmpdir /org/piuparts.debian.org/tmp -ad squeeze -b squeeze.tar.gz --mirror http://piatti.debian.org/debian/ mftrace
Guessed: debian
0m0.0s INFO: ------------------------------------------------------------------------------
0m0.0s INFO: To quickly glance what went wrong, scroll down to the bottom of this logfile.
0m0.0s INFO: FAQ available at http://wiki.debian.org/piuparts/FAQ
0m0.0s INFO: ------------------------------------------------------------------------------
0m0.0s INFO: piuparts version 0.39~201002251129 starting up.
0m0.0s INFO: Command line arguments: /org/piuparts.debian.org/sbin/piuparts --warn-symlinks --warn-on-others --warn-on-leftovers-after-purge --scriptsdir /etc/piuparts/scripts/ --tmpdir /org/piuparts.debian.org/tmp -ad squeeze -b squeeze.tar.gz --mirror http://piatti.debian.org/debian/ mftrace
0m0.0s INFO: Running on: Linux piatti 2.6.32.9-dsa-amd64 #1 SMP Tue Feb 23 18:40:58 CET 2010 x86_64
0m0.0s DEBUG: Created temporary directory /org/piuparts.debian.org/tmp/tmpwvwVQo
0m0.0s DEBUG: Unpacking squeeze.tar.gz into /org/piuparts.debian.org/tmp/tmpwvwVQo
0m0.0s DEBUG: Starting command: ['tar', '-C', '/org/piuparts.debian.org/tmp/tmpwvwVQo', '-zxf', 'squeeze.tar.gz']
0m3.2s DEBUG: Command ok: ['tar', '-C', '/org/piuparts.debian.org/tmp/tmpwvwVQo', '-zxf', 'squeeze.tar.gz']
0m3.2s DEBUG: Created policy-rc.d and chmodded it.
0m3.2s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpwvwVQo', 'apt-get', 'update']
0m5.0s DUMP:
Get:1 http://piatti.debian.org squeeze Release.gpg [835B]
Get:2 http://piatti.debian.org squeeze Release [89.5kB]
Ign http://piatti.debian.org squeeze/main Packages/DiffIndex
Ign http://piatti.debian.org squeeze/contrib Packages/DiffIndex
Ign http://piatti.debian.org squeeze/non-free Packages/DiffIndex
Ign http://piatti.debian.org squeeze/main Packages
Ign http://piatti.debian.org squeeze/contrib Packages
Ign http://piatti.debian.org squeeze/non-free Packages
Get:3 http://piatti.debian.org squeeze/main Packages [8116kB]
Get:4 http://piatti.debian.org squeeze/contrib Packages [59.0kB]
Get:5 http://piatti.debian.org squeeze/non-free Packages [113kB]
Fetched 8379kB in 0s (9309kB/s)
Reading package lists...
0m5.0s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpwvwVQo', 'apt-get', 'update']
0m5.0s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpwvwVQo', 'mount', '-t', 'proc', 'proc', '/proc']
0m5.0s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpwvwVQo', 'mount', '-t', 'proc', 'proc', '/proc']
0m5.0s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpwvwVQo', 'apt-get', '-yf', 'upgrade']
0m7.6s DUMP:
Reading package lists...
Building dependency tree...
The following packages have been kept back:
libpam-modules
The following packages will be upgraded:
apt base-files e2fslibs e2fsprogs libacl1 libcomerr2 libdb4.7 libpam-runtime
libpam0g libss2 libusb-0.1-4 perl-base tzdata
13 upgraded, 0 newly installed, 0 to remove and 1 not upgraded.
Need to get 5758kB of archives.
After this operation, 774kB disk space will be freed.
Get:1 http://piatti.debian.org squeeze/main base-files 5.1 [61.4kB]
Get:2 http://piatti.debian.org squeeze/main e2fslibs 1.41.10-1 [143kB]
Get:3 http://piatti.debian.org squeeze/main e2fsprogs 1.41.10-1 [801kB]
Get:4 http://piatti.debian.org squeeze/main perl-base 5.10.1-11 [1090kB]
Get:5 http://piatti.debian.org squeeze/main apt 0.7.25.3 [1750kB]
Get:6 http://piatti.debian.org squeeze/main libusb-0.1-4 2:0.1.12-14 [21.7kB]
Get:7 http://piatti.debian.org squeeze/main libacl1 2.2.49-2 [28.2kB]
Get:8 http://piatti.debian.org squeeze/main libcomerr2 1.41.10-1 [47.6kB]
Get:9 http://piatti.debian.org squeeze/main libpam-runtime 1.1.1-1 [219kB]
Get:10 http://piatti.debian.org squeeze/main libpam0g 1.1.1-1 [118kB]
Get:11 http://piatti.debian.org squeeze/main libss2 1.41.10-1 [53.3kB]
Get:12 http://piatti.debian.org squeeze/main tzdata 2010b-1 [763kB]
Get:13 http://piatti.debian.org squeeze/main libdb4.7 4.7.25-9 [662kB]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 5758kB in 0s (46.4MB/s)
(Reading database ... 5972 files and directories currently installed.)
Preparing to replace base-files 5.0.0 (using .../base-files_5.1_amd64.deb) ...
Unpacking replacement base-files ...
Setting up base-files (5.1) ...
(Reading database ... 5972 files and directories currently installed.)
Preparing to replace e2fslibs 1.41.9-1 (using .../e2fslibs_1.41.10-1_amd64.deb) ...
Unpacking replacement e2fslibs ...
Setting up e2fslibs (1.41.10-1) ...
(Reading database ... 5972 files and directories currently installed.)
Preparing to replace e2fsprogs 1.41.9-1 (using .../e2fsprogs_1.41.10-1_amd64.deb) ...
Unpacking replacement e2fsprogs ...
Setting up e2fsprogs (1.41.10-1) ...
Installing new version of config file /etc/mke2fs.conf ...
(Reading database ... 5972 files and directories currently installed.)
Preparing to replace perl-base 5.10.1-9 (using .../perl-base_5.10.1-11_amd64.deb) ...
Unpacking replacement perl-base ...
Setting up perl-base (5.10.1-11) ...
(Reading database ... 5972 files and directories currently installed.)
Preparing to replace apt 0.7.25 (using .../apt_0.7.25.3_amd64.deb) ...
Unpacking replacement apt ...
Setting up apt (0.7.25.3) ...
gpg: key 6070D3A1: "Debian Archive Automatic Signing Key (4.0/etch) <ftpmaster@debian.org>" not changed
gpg: key ADB11277: "Etch Stable Release Key <debian-release@lists.debian.org>" not changed
gpg: key BBE55AB3: "Debian-Volatile Archive Automatic Signing Key (4.0/etch)" not changed
gpg: key F42584E6: "Lenny Stable Release Key <debian-release@lists.debian.org>" not changed
gpg: key 55BE302B: "Debian Archive Automatic Signing Key (5.0/lenny) <ftpmaster@debian.org>" not changed
gpg: key 6D849617: "Debian-Volatile Archive Automatic Signing Key (5.0/lenny)" not changed
gpg: Total number processed: 6
gpg: unchanged: 6
(Reading database ... 5974 files and directories currently installed.)
Preparing to replace libusb-0.1-4 2:0.1.12-13 (using .../libusb-0.1-4_2%3a0.1.12-14_amd64.deb) ...
Unpacking replacement libusb-0.1-4 ...
Setting up libusb-0.1-4 (2:0.1.12-14) ...
(Reading database ... 5974 files and directories currently installed.)
Preparing to replace libacl1 2.2.49-1 (using .../libacl1_2.2.49-2_amd64.deb) ...
Unpacking replacement libacl1 ...
Setting up libacl1 (2.2.49-2) ...
(Reading database ... 5975 files and directories currently installed.)
Preparing to replace libcomerr2 1.41.9-1 (using .../libcomerr2_1.41.10-1_amd64.deb) ...
Unpacking replacement libcomerr2 ...
Setting up libcomerr2 (1.41.10-1) ...
(Reading database ... 5975 files and directories currently installed.)
Preparing to replace libpam-runtime 1.1.0-4 (using .../libpam-runtime_1.1.1-1_all.deb) ...
Unpacking replacement libpam-runtime ...
Setting up libpam-runtime (1.1.1-1) ...
(Reading database ... 5975 files and directories currently installed.)
Preparing to replace libpam0g 1.1.0-4 (using .../libpam0g_1.1.1-1_amd64.deb) ...
Unpacking replacement libpam0g ...
Setting up libpam0g (1.1.1-1) ...
(Reading database ... 5975 files and directories currently installed.)
Preparing to replace libss2 1.41.9-1 (using .../libss2_1.41.10-1_amd64.deb) ...
Unpacking replacement libss2 ...
Setting up libss2 (1.41.10-1) ...
(Reading database ... 5975 files and directories currently installed.)
Preparing to replace tzdata 2010a-1 (using .../tzdata_2010b-1_all.deb) ...
Unpacking replacement tzdata ...
Setting up tzdata (2010b-1) ...
Current default time zone: 'Etc/UTC'
Local time is now: Thu Feb 25 14:29:19 UTC 2010.
Universal Time is now: Thu Feb 25 14:29:19 UTC 2010.
Run 'dpkg-reconfigure tzdata' if you wish to change it.
(Reading database ... 5984 files and directories currently installed.)
Preparing to replace libdb4.7 4.7.25-8 (using .../libdb4.7_4.7.25-9_amd64.deb) ...
Unpacking replacement libdb4.7 ...
Setting up libdb4.7 (4.7.25-9) ...
0m7.6s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpwvwVQo', 'apt-get', '-yf', 'upgrade']
0m7.6s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpwvwVQo', 'apt-get', 'clean']
0m7.6s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpwvwVQo', 'apt-get', 'clean']
0m7.6s DEBUG: Copying scriptsdir to /org/piuparts.debian.org/tmp/tmpwvwVQo/tmp/scripts/
0m7.6s INFO: Running scripts post_setup
0m8.3s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpwvwVQo', 'dpkg', '--get-selections', '*']
0m8.4s DUMP:
apt install
base-files install
base-passwd install
bash install
bsdutils install
coreutils install
dash install
debconf install
debconf-i18n install
debian-archive-keyring install
debianutils install
diffutils install
dpkg install
e2fslibs install
e2fsprogs install
findutils install
gcc-4.4-base install
gnupg install
gpgv install
grep install
gzip install
hostname install
initscripts install
insserv install
libacl1 install
libattr1 install
libblkid1 install
libbz2-1.0 install
libc-bin install
libc6 install
libcomerr2 install
libdb4.7 install
libgcc1 install
liblocale-gettext-perl install
libncurses5 install
libpam-modules install
libpam-runtime install
libpam0g install
libreadline6 install
libselinux1 install
libsepol1 install
libss2 install
libstdc++6 install
libtext-charwidth-perl install
libtext-iconv-perl install
libtext-wrapi18n-perl install
libunwind7 install
libusb-0.1-4 install
libuuid1 install
login install
lsb-base install
lzma install
mawk install
mount install
ncurses-base install
ncurses-bin install
passwd install
perl-base install
readline-common install
sed install
sensible-utils install
sysv-rc install
sysvinit install
sysvinit-utils install
tar install
tzdata install
util-linux install
zlib1g install
0m8.4s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpwvwVQo', 'dpkg', '--get-selections', '*']
0m8.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpwvwVQo', 'apt-cache', 'show', 'mftrace']
0m8.5s DUMP:
Package: mftrace
Priority: extra
Section: tex
Installed-Size: 172
Maintainer: Julian Gilbey <jdg@debian.org>
Architecture: amd64
Version: 1.2.16-1
Depends: python, python-central (>= 0.6.11), potrace | autotrace, t1utils, texlive-base-bin, libc6 (>= 2.7)
Suggests: fontforge, ghostscript
Filename: pool/main/m/mftrace/mftrace_1.2.16-1_amd64.deb
Size: 45252
MD5sum: e909eea099f902ced53fd6b36aa15826
SHA1: 00e06a0e7d257c3bc66926724ad70befaf9da491
SHA256: e71c453b2bc22466ddd668d917a06396a4c0b96c6243f45aa916ca608ecc46c9
Description: Converts Metafont fonts into Type1 fonts
mftrace is a small Python program that lets you trace a TeX bitmap
font (a METAFONT font) into a PFA or PFB font (A PostScript Type1
Scalable Font).
.
Type1 fonts offer many advantages over bitmaps, as they allow
PostScript files to render correctly on printers with many resolutions.
Moreover, Ghostscript can generate much better PDF, if given scalable
fonts.
Python-Version: current
Tag: implemented-in::python, interface::commandline, role::program, use::converting, works-with::font
0m8.5s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpwvwVQo', 'apt-cache', 'show', 'mftrace']
0m8.5s DEBUG: Starting command: ['dpkg-deb', '-b', '/org/piuparts.debian.org/tmp/tmpbwP8Bh/piuparts-depends-dummy']
0m8.5s DUMP:
dpkg-deb: building package `piuparts-depends-dummy' in `/org/piuparts.debian.org/tmp/tmpbwP8Bh/piuparts-depends-dummy.deb'.
0m8.5s DEBUG: Command ok: ['dpkg-deb', '-b', '/org/piuparts.debian.org/tmp/tmpbwP8Bh/piuparts-depends-dummy']
0m8.5s DEBUG: Copying /org/piuparts.debian.org/tmp/tmpbwP8Bh/piuparts-depends-dummy.deb to /org/piuparts.debian.org/tmp/tmpwvwVQo/tmp
0m8.5s INFO: Running scripts pre_install
0m8.5s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpwvwVQo', 'dpkg', '-i', 'tmp/piuparts-depends-dummy.deb']
0m8.5s DUMP:
Selecting previously deselected package piuparts-depends-dummy.
(Reading database ... 5984 files and directories currently installed.)
Unpacking piuparts-depends-dummy (from tmp/piuparts-depends-dummy.deb) ...
dpkg: dependency problems prevent configuration of piuparts-depends-dummy:
piuparts-depends-dummy depends on python; however:
Package python is not installed.
piuparts-depends-dummy depends on python-central (>= 0.6.11); however:
Package python-central is not installed.
piuparts-depends-dummy depends on potrace | autotrace; however:
Package potrace is not installed.
Package autotrace is not installed.
piuparts-depends-dummy depends on t1utils; however:
Package t1utils is not installed.
piuparts-depends-dummy depends on texlive-base-bin; however:
Package texlive-base-bin is not installed.
dpkg: error processing piuparts-depends-dummy (--install):
dependency problems - leaving unconfigured
Errors were encountered while processing:
piuparts-depends-dummy
0m8.5s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/org/piuparts.debian.org/tmp/tmpwvwVQo', 'dpkg', '-i', 'tmp/piuparts-depends-dummy.deb']
0m8.5s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpwvwVQo', 'apt-get', '-yf', '--no-remove', 'install']
0m16.7s DUMP:
Reading package lists...
Building dependency tree...
Reading state information...
Correcting dependencies... Done
The following extra packages will be installed:
fontconfig-config libdb4.5 libexpat1 libfontconfig1 libfreetype6 libice6
libjpeg62 libkpathsea5 liblcms1 libncursesw5 libopenjpeg2 libpng12-0
libpoppler5 libpotrace0 libsm6 libsqlite3-0 libssl0.9.8 libx11-6 libx11-data
libxau6 libxaw7 libxcb1 libxdmcp6 libxext6 libxml2 libxmu6 libxpm4 libxt6
mime-support potrace python python-central python-minimal python2.5
python2.5-minimal t1utils tex-common texlive-binaries ttf-dejavu-core ucf
x11-common
Suggested packages:
liblcms-utils netpbm python-doc python-tk python-profiler python2.5-doc
binfmt-support debhelper
Recommended packages:
libgpm2 xml-core file
The following NEW packages will be installed:
fontconfig-config libdb4.5 libexpat1 libfontconfig1 libfreetype6 libice6
libjpeg62 libkpathsea5 liblcms1 libncursesw5 libopenjpeg2 libpng12-0
libpoppler5 libpotrace0 libsm6 libsqlite3-0 libssl0.9.8 libx11-6 libx11-data
libxau6 libxaw7 libxcb1 libxdmcp6 libxext6 libxml2 libxmu6 libxpm4 libxt6
mime-support potrace python python-central python-minimal python2.5
python2.5-minimal t1utils tex-common texlive-binaries ttf-dejavu-core ucf
x11-common
0 upgraded, 41 newly installed, 0 to remove and 1 not upgraded.
1 not fully installed or removed.
Need to get 22.9MB of archives.
After this operation, 59.2MB of additional disk space will be used.
Get:1 http://piatti.debian.org squeeze/main python2.5-minimal 2.5.5-2 [1287kB]
Get:2 http://piatti.debian.org squeeze/main mime-support 3.48-1 [34.2kB]
Get:3 http://piatti.debian.org squeeze/main libdb4.5 4.5.20-13.1 [553kB]
Get:4 http://piatti.debian.org squeeze/main libncursesw5 5.7+20090803-2 [379kB]
Get:5 http://piatti.debian.org squeeze/main libsqlite3-0 3.6.22-1 [307kB]
Get:6 http://piatti.debian.org squeeze/main libssl0.9.8 0.9.8k-8 [984kB]
Get:7 http://piatti.debian.org squeeze/main python2.5 2.5.5-2 [3040kB]
Get:8 http://piatti.debian.org squeeze/main python-minimal 2.5.4-9 [14.9kB]
Get:9 http://piatti.debian.org squeeze/main python 2.5.4-9 [145kB]
Get:10 http://piatti.debian.org squeeze/main python-central 0.6.14+nmu2 [44.8kB]
Get:11 http://piatti.debian.org squeeze/main libpotrace0 1.8-4 [24.7kB]
Get:12 http://piatti.debian.org squeeze/main potrace 1.8-4 [78.0kB]
Get:13 http://piatti.debian.org squeeze/main t1utils 1.35-1 [134kB]
Get:14 http://piatti.debian.org squeeze/main libexpat1 2.0.1-7 [137kB]
Get:15 http://piatti.debian.org squeeze/main libfreetype6 2.3.11-1 [432kB]
Get:16 http://piatti.debian.org squeeze/main ucf 3.0025 [66.0kB]
Get:17 http://piatti.debian.org squeeze/main ttf-dejavu-core 2.30-2 [1436kB]
Get:18 http://piatti.debian.org squeeze/main fontconfig-config 2.8.0-2 [217kB]
Get:19 http://piatti.debian.org squeeze/main libfontconfig1 2.8.0-2 [281kB]
Get:20 http://piatti.debian.org squeeze/main libkpathsea5 2009-5 [134kB]
Get:21 http://piatti.debian.org squeeze/main libpng12-0 1.2.42-2 [179kB]
Get:22 http://piatti.debian.org squeeze/main libjpeg62 6b-15 [92.2kB]
Get:23 http://piatti.debian.org squeeze/main liblcms1 1.18.dfsg-1.2+b1 [112kB]
Get:24 http://piatti.debian.org squeeze/main libopenjpeg2 1.3+dfsg-4 [79.5kB]
Get:25 http://piatti.debian.org squeeze/main libxml2 2.7.6.dfsg-2+b1 [870kB]
Get:26 http://piatti.debian.org squeeze/main libpoppler5 0.12.2-2 [943kB]
Get:27 http://piatti.debian.org squeeze/main libxau6 1:1.0.5-1 [14.2kB]
Get:28 http://piatti.debian.org squeeze/main libxdmcp6 1:1.0.3-1 [18.9kB]
Get:29 http://piatti.debian.org squeeze/main libxcb1 1.5-2 [43.4kB]
Get:30 http://piatti.debian.org squeeze/main libx11-data 2:1.3.3-1 [231kB]
Get:31 http://piatti.debian.org squeeze/main libx11-6 2:1.3.3-1 [851kB]
Get:32 http://piatti.debian.org squeeze/main libxext6 2:1.1.1-2 [43.3kB]
Get:33 http://piatti.debian.org squeeze/main x11-common 1:7.5+3 [279kB]
Get:34 http://piatti.debian.org squeeze/main libice6 2:1.0.6-1 [53.8kB]
Get:35 http://piatti.debian.org squeeze/main libsm6 2:1.1.1-1 [25.0kB]
Get:36 http://piatti.debian.org squeeze/main libxt6 1:1.0.7-1 [192kB]
Get:37 http://piatti.debian.org squeeze/main libxmu6 2:1.0.5-1 [57.6kB]
Get:38 http://piatti.debian.org squeeze/main libxpm4 1:3.5.8-1 [44.2kB]
Get:39 http://piatti.debian.org squeeze/main libxaw7 2:1.0.7-1 [211kB]
Get:40 http://piatti.debian.org squeeze/main tex-common 2.06 [724kB]
Get:41 http://piatti.debian.org squeeze/main texlive-binaries 2009-5 [8072kB]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 22.9MB in 0s (44.4MB/s)
Selecting previously deselected package python2.5-minimal.
(Reading database ... 5984 files and directories currently installed.)
Unpacking python2.5-minimal (from .../python2.5-minimal_2.5.5-2_amd64.deb) ...
Selecting previously deselected package mime-support.
Unpacking mime-support (from .../mime-support_3.48-1_all.deb) ...
Selecting previously deselected package libdb4.5.
Unpacking libdb4.5 (from .../libdb4.5_4.5.20-13.1_amd64.deb) ...
Selecting previously deselected package libncursesw5.
Unpacking libncursesw5 (from .../libncursesw5_5.7+20090803-2_amd64.deb) ...
Selecting previously deselected package libsqlite3-0.
Unpacking libsqlite3-0 (from .../libsqlite3-0_3.6.22-1_amd64.deb) ...
Selecting previously deselected package libssl0.9.8.
Unpacking libssl0.9.8 (from .../libssl0.9.8_0.9.8k-8_amd64.deb) ...
Selecting previously deselected package python2.5.
Unpacking python2.5 (from .../python2.5_2.5.5-2_amd64.deb) ...
Selecting previously deselected package python-minimal.
Unpacking python-minimal (from .../python-minimal_2.5.4-9_all.deb) ...
Selecting previously deselected package python.
Unpacking python (from .../python_2.5.4-9_all.deb) ...
Selecting previously deselected package python-central.
Unpacking python-central (from .../python-central_0.6.14+nmu2_all.deb) ...
Selecting previously deselected package libpotrace0.
Unpacking libpotrace0 (from .../libpotrace0_1.8-4_amd64.deb) ...
Selecting previously deselected package potrace.
Unpacking potrace (from .../potrace_1.8-4_amd64.deb) ...
Selecting previously deselected package t1utils.
Unpacking t1utils (from .../t1utils_1.35-1_amd64.deb) ...
Selecting previously deselected package libexpat1.
Unpacking libexpat1 (from .../libexpat1_2.0.1-7_amd64.deb) ...
Selecting previously deselected package libfreetype6.
Unpacking libfreetype6 (from .../libfreetype6_2.3.11-1_amd64.deb) ...
Selecting previously deselected package ucf.
Unpacking ucf (from .../archives/ucf_3.0025_all.deb) ...
Moving old data out of the way
Selecting previously deselected package ttf-dejavu-core.
Unpacking ttf-dejavu-core (from .../ttf-dejavu-core_2.30-2_all.deb) ...
Selecting previously deselected package fontconfig-config.
Unpacking fontconfig-config (from .../fontconfig-config_2.8.0-2_all.deb) ...
Selecting previously deselected package libfontconfig1.
Unpacking libfontconfig1 (from .../libfontconfig1_2.8.0-2_amd64.deb) ...
Selecting previously deselected package libkpathsea5.
Unpacking libkpathsea5 (from .../libkpathsea5_2009-5_amd64.deb) ...
Selecting previously deselected package libpng12-0.
Unpacking libpng12-0 (from .../libpng12-0_1.2.42-2_amd64.deb) ...
Selecting previously deselected package libjpeg62.
Unpacking libjpeg62 (from .../libjpeg62_6b-15_amd64.deb) ...
Selecting previously deselected package liblcms1.
Unpacking liblcms1 (from .../liblcms1_1.18.dfsg-1.2+b1_amd64.deb) ...
Selecting previously deselected package libopenjpeg2.
Unpacking libopenjpeg2 (from .../libopenjpeg2_1.3+dfsg-4_amd64.deb) ...
Selecting previously deselected package libxml2.
Unpacking libxml2 (from .../libxml2_2.7.6.dfsg-2+b1_amd64.deb) ...
Selecting previously deselected package libpoppler5.
Unpacking libpoppler5 (from .../libpoppler5_0.12.2-2_amd64.deb) ...
Selecting previously deselected package libxau6.
Unpacking libxau6 (from .../libxau6_1%3a1.0.5-1_amd64.deb) ...
Selecting previously deselected package libxdmcp6.
Unpacking libxdmcp6 (from .../libxdmcp6_1%3a1.0.3-1_amd64.deb) ...
Selecting previously deselected package libxcb1.
Unpacking libxcb1 (from .../libxcb1_1.5-2_amd64.deb) ...
Selecting previously deselected package libx11-data.
Unpacking libx11-data (from .../libx11-data_2%3a1.3.3-1_all.deb) ...
Selecting previously deselected package libx11-6.
Unpacking libx11-6 (from .../libx11-6_2%3a1.3.3-1_amd64.deb) ...
Selecting previously deselected package libxext6.
Unpacking libxext6 (from .../libxext6_2%3a1.1.1-2_amd64.deb) ...
Selecting previously deselected package x11-common.
Unpacking x11-common (from .../x11-common_1%3a7.5+3_all.deb) ...
Selecting previously deselected package libice6.
Unpacking libice6 (from .../libice6_2%3a1.0.6-1_amd64.deb) ...
Selecting previously deselected package libsm6.
Unpacking libsm6 (from .../libsm6_2%3a1.1.1-1_amd64.deb) ...
Selecting previously deselected package libxt6.
Unpacking libxt6 (from .../libxt6_1%3a1.0.7-1_amd64.deb) ...
Selecting previously deselected package libxmu6.
Unpacking libxmu6 (from .../libxmu6_2%3a1.0.5-1_amd64.deb) ...
Selecting previously deselected package libxpm4.
Unpacking libxpm4 (from .../libxpm4_1%3a3.5.8-1_amd64.deb) ...
Selecting previously deselected package libxaw7.
Unpacking libxaw7 (from .../libxaw7_2%3a1.0.7-1_amd64.deb) ...
Selecting previously deselected package tex-common.
Unpacking tex-common (from .../tex-common_2.06_all.deb) ...
Selecting previously deselected package texlive-binaries.
Unpacking texlive-binaries (from .../texlive-binaries_2009-5_amd64.deb) ...
Setting up python2.5-minimal (2.5.5-2) ...
Setting up mime-support (3.48-1) ...
update-alternatives: using /usr/bin/see to provide /usr/bin/view (view) in auto mode.
Setting up libdb4.5 (4.5.20-13.1) ...
Setting up libncursesw5 (5.7+20090803-2) ...
Setting up libsqlite3-0 (3.6.22-1) ...
Setting up libssl0.9.8 (0.9.8k-8) ...
Setting up python2.5 (2.5.5-2) ...
Setting up python-minimal (2.5.4-9) ...
Setting up python (2.5.4-9) ...
Setting up python-central (0.6.14+nmu2) ...
Setting up libpotrace0 (1.8-4) ...
Setting up potrace (1.8-4) ...
Setting up t1utils (1.35-1) ...
Setting up libexpat1 (2.0.1-7) ...
Setting up libfreetype6 (2.3.11-1) ...
Setting up ucf (3.0025) ...
Setting up ttf-dejavu-core (2.30-2) ...
Setting up fontconfig-config (2.8.0-2) ...
Setting up libfontconfig1 (2.8.0-2) ...
Setting up libkpathsea5 (2009-5) ...
Setting up libpng12-0 (1.2.42-2) ...
Setting up libjpeg62 (6b-15) ...
Setting up liblcms1 (1.18.dfsg-1.2+b1) ...
Setting up libopenjpeg2 (1.3+dfsg-4) ...
Setting up libxml2 (2.7.6.dfsg-2+b1) ...
Setting up libpoppler5 (0.12.2-2) ...
Setting up libxau6 (1:1.0.5-1) ...
Setting up libxdmcp6 (1:1.0.3-1) ...
Setting up libxcb1 (1.5-2) ...
Setting up libx11-data (2:1.3.3-1) ...
Setting up libx11-6 (2:1.3.3-1) ...
Setting up libxext6 (2:1.1.1-2) ...
Setting up x11-common (1:7.5+3) ...
Setting up libice6 (2:1.0.6-1) ...
Setting up libsm6 (2:1.1.1-1) ...
Setting up libxt6 (1:1.0.7-1) ...
Setting up libxmu6 (2:1.0.5-1) ...
Setting up libxpm4 (1:3.5.8-1) ...
Setting up libxaw7 (2:1.0.7-1) ...
Setting up tex-common (2.06) ...
Creating config file /etc/texmf/texmf.d/05TeXMF.cnf with new version
Creating config file /etc/texmf/texmf.d/15Plain.cnf with new version
Creating config file /etc/texmf/texmf.d/45TeXinputs.cnf with new version
Creating config file /etc/texmf/texmf.d/55Fonts.cnf with new version
Creating config file /etc/texmf/texmf.d/65BibTeX.cnf with new version
Creating config file /etc/texmf/texmf.d/75DviPS.cnf with new version
Creating config file /etc/texmf/texmf.d/85Misc.cnf with new version
Creating config file /etc/texmf/texmf.d/90TeXDoc.cnf with new version
Creating config file /etc/texmf/texmf.d/95NonPath.cnf with new version
Creating config file /etc/texmf/updmap.d/00updmap.cfg with new version
Creating config file /etc/texmf/texmf.cnf with new version
Running mktexlsr. This may take some time... done.
No packages found matching texlive-base.
dpkg: error processing tex-common (--configure):
subprocess installed post-installation script returned error exit status 1
dpkg: dependency problems prevent configuration of texlive-binaries:
texlive-binaries depends on tex-common (>= 2.00); however:
Package tex-common is not configured yet.
dpkg: error processing texlive-binaries (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of piuparts-depends-dummy:
piuparts-depends-dummy depends on texlive-base-bin; however:
Package texlive-base-bin is not installed.
Package texlive-binaries which provides texlive-base-bin is not configured yet.
dpkg: error processing piuparts-depends-dummy (--configure):
dependency problems - leaving unconfigured
Errors were encountered while processing:
tex-common
texlive-binaries
piuparts-depends-dummy
E: Sub-process /usr/bin/dpkg returned an error code (1)
0m16.7s ERROR: Command failed (status=100): ['chroot', '/org/piuparts.debian.org/tmp/tmpwvwVQo', 'apt-get', '-yf', '--no-remove', 'install']
Reading package lists...
Building dependency tree...
Reading state information...
Correcting dependencies... Done
The following extra packages will be installed:
fontconfig-config libdb4.5 libexpat1 libfontconfig1 libfreetype6 libice6
libjpeg62 libkpathsea5 liblcms1 libncursesw5 libopenjpeg2 libpng12-0
libpoppler5 libpotrace0 libsm6 libsqlite3-0 libssl0.9.8 libx11-6 libx11-data
libxau6 libxaw7 libxcb1 libxdmcp6 libxext6 libxml2 libxmu6 libxpm4 libxt6
mime-support potrace python python-central python-minimal python2.5
python2.5-minimal t1utils tex-common texlive-binaries ttf-dejavu-core ucf
x11-common
Suggested packages:
liblcms-utils netpbm python-doc python-tk python-profiler python2.5-doc
binfmt-support debhelper
Recommended packages:
libgpm2 xml-core file
The following NEW packages will be installed:
fontconfig-config libdb4.5 libexpat1 libfontconfig1 libfreetype6 libice6
libjpeg62 libkpathsea5 liblcms1 libncursesw5 libopenjpeg2 libpng12-0
libpoppler5 libpotrace0 libsm6 libsqlite3-0 libssl0.9.8 libx11-6 libx11-data
libxau6 libxaw7 libxcb1 libxdmcp6 libxext6 libxml2 libxmu6 libxpm4 libxt6
mime-support potrace python python-central python-minimal python2.5
python2.5-minimal t1utils tex-common texlive-binaries ttf-dejavu-core ucf
x11-common
0 upgraded, 41 newly installed, 0 to remove and 1 not upgraded.
1 not fully installed or removed.
Need to get 22.9MB of archives.
After this operation, 59.2MB of additional disk space will be used.
Get:1 http://piatti.debian.org squeeze/main python2.5-minimal 2.5.5-2 [1287kB]
Get:2 http://piatti.debian.org squeeze/main mime-support 3.48-1 [34.2kB]
Get:3 http://piatti.debian.org squeeze/main libdb4.5 4.5.20-13.1 [553kB]
Get:4 http://piatti.debian.org squeeze/main libncursesw5 5.7+20090803-2 [379kB]
Get:5 http://piatti.debian.org squeeze/main libsqlite3-0 3.6.22-1 [307kB]
Get:6 http://piatti.debian.org squeeze/main libssl0.9.8 0.9.8k-8 [984kB]
Get:7 http://piatti.debian.org squeeze/main python2.5 2.5.5-2 [3040kB]
Get:8 http://piatti.debian.org squeeze/main python-minimal 2.5.4-9 [14.9kB]
Get:9 http://piatti.debian.org squeeze/main python 2.5.4-9 [145kB]
Get:10 http://piatti.debian.org squeeze/main python-central 0.6.14+nmu2 [44.8kB]
Get:11 http://piatti.debian.org squeeze/main libpotrace0 1.8-4 [24.7kB]
Get:12 http://piatti.debian.org squeeze/main potrace 1.8-4 [78.0kB]
Get:13 http://piatti.debian.org squeeze/main t1utils 1.35-1 [134kB]
Get:14 http://piatti.debian.org squeeze/main libexpat1 2.0.1-7 [137kB]
Get:15 http://piatti.debian.org squeeze/main libfreetype6 2.3.11-1 [432kB]
Get:16 http://piatti.debian.org squeeze/main ucf 3.0025 [66.0kB]
Get:17 http://piatti.debian.org squeeze/main ttf-dejavu-core 2.30-2 [1436kB]
Get:18 http://piatti.debian.org squeeze/main fontconfig-config 2.8.0-2 [217kB]
Get:19 http://piatti.debian.org squeeze/main libfontconfig1 2.8.0-2 [281kB]
Get:20 http://piatti.debian.org squeeze/main libkpathsea5 2009-5 [134kB]
Get:21 http://piatti.debian.org squeeze/main libpng12-0 1.2.42-2 [179kB]
Get:22 http://piatti.debian.org squeeze/main libjpeg62 6b-15 [92.2kB]
Get:23 http://piatti.debian.org squeeze/main liblcms1 1.18.dfsg-1.2+b1 [112kB]
Get:24 http://piatti.debian.org squeeze/main libopenjpeg2 1.3+dfsg-4 [79.5kB]
Get:25 http://piatti.debian.org squeeze/main libxml2 2.7.6.dfsg-2+b1 [870kB]
Get:26 http://piatti.debian.org squeeze/main libpoppler5 0.12.2-2 [943kB]
Get:27 http://piatti.debian.org squeeze/main libxau6 1:1.0.5-1 [14.2kB]
Get:28 http://piatti.debian.org squeeze/main libxdmcp6 1:1.0.3-1 [18.9kB]
Get:29 http://piatti.debian.org squeeze/main libxcb1 1.5-2 [43.4kB]
Get:30 http://piatti.debian.org squeeze/main libx11-data 2:1.3.3-1 [231kB]
Get:31 http://piatti.debian.org squeeze/main libx11-6 2:1.3.3-1 [851kB]
Get:32 http://piatti.debian.org squeeze/main libxext6 2:1.1.1-2 [43.3kB]
Get:33 http://piatti.debian.org squeeze/main x11-common 1:7.5+3 [279kB]
Get:34 http://piatti.debian.org squeeze/main libice6 2:1.0.6-1 [53.8kB]
Get:35 http://piatti.debian.org squeeze/main libsm6 2:1.1.1-1 [25.0kB]
Get:36 http://piatti.debian.org squeeze/main libxt6 1:1.0.7-1 [192kB]
Get:37 http://piatti.debian.org squeeze/main libxmu6 2:1.0.5-1 [57.6kB]
Get:38 http://piatti.debian.org squeeze/main libxpm4 1:3.5.8-1 [44.2kB]
Get:39 http://piatti.debian.org squeeze/main libxaw7 2:1.0.7-1 [211kB]
Get:40 http://piatti.debian.org squeeze/main tex-common 2.06 [724kB]
Get:41 http://piatti.debian.org squeeze/main texlive-binaries 2009-5 [8072kB]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 22.9MB in 0s (44.4MB/s)
Selecting previously deselected package python2.5-minimal.
(Reading database ... 5984 files and directories currently installed.)
Unpacking python2.5-minimal (from .../python2.5-minimal_2.5.5-2_amd64.deb) ...
Selecting previously deselected package mime-support.
Unpacking mime-support (from .../mime-support_3.48-1_all.deb) ...
Selecting previously deselected package libdb4.5.
Unpacking libdb4.5 (from .../libdb4.5_4.5.20-13.1_amd64.deb) ...
Selecting previously deselected package libncursesw5.
Unpacking libncursesw5 (from .../libncursesw5_5.7+20090803-2_amd64.deb) ...
Selecting previously deselected package libsqlite3-0.
Unpacking libsqlite3-0 (from .../libsqlite3-0_3.6.22-1_amd64.deb) ...
Selecting previously deselected package libssl0.9.8.
Unpacking libssl0.9.8 (from .../libssl0.9.8_0.9.8k-8_amd64.deb) ...
Selecting previously deselected package python2.5.
Unpacking python2.5 (from .../python2.5_2.5.5-2_amd64.deb) ...
Selecting previously deselected package python-minimal.
Unpacking python-minimal (from .../python-minimal_2.5.4-9_all.deb) ...
Selecting previously deselected package python.
Unpacking python (from .../python_2.5.4-9_all.deb) ...
Selecting previously deselected package python-central.
Unpacking python-central (from .../python-central_0.6.14+nmu2_all.deb) ...
Selecting previously deselected package libpotrace0.
Unpacking libpotrace0 (from .../libpotrace0_1.8-4_amd64.deb) ...
Selecting previously deselected package potrace.
Unpacking potrace (from .../potrace_1.8-4_amd64.deb) ...
Selecting previously deselected package t1utils.
Unpacking t1utils (from .../t1utils_1.35-1_amd64.deb) ...
Selecting previously deselected package libexpat1.
Unpacking libexpat1 (from .../libexpat1_2.0.1-7_amd64.deb) ...
Selecting previously deselected package libfreetype6.
Unpacking libfreetype6 (from .../libfreetype6_2.3.11-1_amd64.deb) ...
Selecting previously deselected package ucf.
Unpacking ucf (from .../archives/ucf_3.0025_all.deb) ...
Moving old data out of the way
Selecting previously deselected package ttf-dejavu-core.
Unpacking ttf-dejavu-core (from .../ttf-dejavu-core_2.30-2_all.deb) ...
Selecting previously deselected package fontconfig-config.
Unpacking fontconfig-config (from .../fontconfig-config_2.8.0-2_all.deb) ...
Selecting previously deselected package libfontconfig1.
Unpacking libfontconfig1 (from .../libfontconfig1_2.8.0-2_amd64.deb) ...
Selecting previously deselected package libkpathsea5.
Unpacking libkpathsea5 (from .../libkpathsea5_2009-5_amd64.deb) ...
Selecting previously deselected package libpng12-0.
Unpacking libpng12-0 (from .../libpng12-0_1.2.42-2_amd64.deb) ...
Selecting previously deselected package libjpeg62.
Unpacking libjpeg62 (from .../libjpeg62_6b-15_amd64.deb) ...
Selecting previously deselected package liblcms1.
Unpacking liblcms1 (from .../liblcms1_1.18.dfsg-1.2+b1_amd64.deb) ...
Selecting previously deselected package libopenjpeg2.
Unpacking libopenjpeg2 (from .../libopenjpeg2_1.3+dfsg-4_amd64.deb) ...
Selecting previously deselected package libxml2.
Unpacking libxml2 (from .../libxml2_2.7.6.dfsg-2+b1_amd64.deb) ...
Selecting previously deselected package libpoppler5.
Unpacking libpoppler5 (from .../libpoppler5_0.12.2-2_amd64.deb) ...
Selecting previously deselected package libxau6.
Unpacking libxau6 (from .../libxau6_1%3a1.0.5-1_amd64.deb) ...
Selecting previously deselected package libxdmcp6.
Unpacking libxdmcp6 (from .../libxdmcp6_1%3a1.0.3-1_amd64.deb) ...
Selecting previously deselected package libxcb1.
Unpacking libxcb1 (from .../libxcb1_1.5-2_amd64.deb) ...
Selecting previously deselected package libx11-data.
Unpacking libx11-data (from .../libx11-data_2%3a1.3.3-1_all.deb) ...
Selecting previously deselected package libx11-6.
Unpacking libx11-6 (from .../libx11-6_2%3a1.3.3-1_amd64.deb) ...
Selecting previously deselected package libxext6.
Unpacking libxext6 (from .../libxext6_2%3a1.1.1-2_amd64.deb) ...
Selecting previously deselected package x11-common.
Unpacking x11-common (from .../x11-common_1%3a7.5+3_all.deb) ...
Selecting previously deselected package libice6.
Unpacking libice6 (from .../libice6_2%3a1.0.6-1_amd64.deb) ...
Selecting previously deselected package libsm6.
Unpacking libsm6 (from .../libsm6_2%3a1.1.1-1_amd64.deb) ...
Selecting previously deselected package libxt6.
Unpacking libxt6 (from .../libxt6_1%3a1.0.7-1_amd64.deb) ...
Selecting previously deselected package libxmu6.
Unpacking libxmu6 (from .../libxmu6_2%3a1.0.5-1_amd64.deb) ...
Selecting previously deselected package libxpm4.
Unpacking libxpm4 (from .../libxpm4_1%3a3.5.8-1_amd64.deb) ...
Selecting previously deselected package libxaw7.
Unpacking libxaw7 (from .../libxaw7_2%3a1.0.7-1_amd64.deb) ...
Selecting previously deselected package tex-common.
Unpacking tex-common (from .../tex-common_2.06_all.deb) ...
Selecting previously deselected package texlive-binaries.
Unpacking texlive-binaries (from .../texlive-binaries_2009-5_amd64.deb) ...
Setting up python2.5-minimal (2.5.5-2) ...
Setting up mime-support (3.48-1) ...
update-alternatives: using /usr/bin/see to provide /usr/bin/view (view) in auto mode.
Setting up libdb4.5 (4.5.20-13.1) ...
Setting up libncursesw5 (5.7+20090803-2) ...
Setting up libsqlite3-0 (3.6.22-1) ...
Setting up libssl0.9.8 (0.9.8k-8) ...
Setting up python2.5 (2.5.5-2) ...
Setting up python-minimal (2.5.4-9) ...
Setting up python (2.5.4-9) ...
Setting up python-central (0.6.14+nmu2) ...
Setting up libpotrace0 (1.8-4) ...
Setting up potrace (1.8-4) ...
Setting up t1utils (1.35-1) ...
Setting up libexpat1 (2.0.1-7) ...
Setting up libfreetype6 (2.3.11-1) ...
Setting up ucf (3.0025) ...
Setting up ttf-dejavu-core (2.30-2) ...
Setting up fontconfig-config (2.8.0-2) ...
Setting up libfontconfig1 (2.8.0-2) ...
Setting up libkpathsea5 (2009-5) ...
Setting up libpng12-0 (1.2.42-2) ...
Setting up libjpeg62 (6b-15) ...
Setting up liblcms1 (1.18.dfsg-1.2+b1) ...
Setting up libopenjpeg2 (1.3+dfsg-4) ...
Setting up libxml2 (2.7.6.dfsg-2+b1) ...
Setting up libpoppler5 (0.12.2-2) ...
Setting up libxau6 (1:1.0.5-1) ...
Setting up libxdmcp6 (1:1.0.3-1) ...
Setting up libxcb1 (1.5-2) ...
Setting up libx11-data (2:1.3.3-1) ...
Setting up libx11-6 (2:1.3.3-1) ...
Setting up libxext6 (2:1.1.1-2) ...
Setting up x11-common (1:7.5+3) ...
Setting up libice6 (2:1.0.6-1) ...
Setting up libsm6 (2:1.1.1-1) ...
Setting up libxt6 (1:1.0.7-1) ...
Setting up libxmu6 (2:1.0.5-1) ...
Setting up libxpm4 (1:3.5.8-1) ...
Setting up libxaw7 (2:1.0.7-1) ...
Setting up tex-common (2.06) ...
Creating config file /etc/texmf/texmf.d/05TeXMF.cnf with new version
Creating config file /etc/texmf/texmf.d/15Plain.cnf with new version
Creating config file /etc/texmf/texmf.d/45TeXinputs.cnf with new version
Creating config file /etc/texmf/texmf.d/55Fonts.cnf with new version
Creating config file /etc/texmf/texmf.d/65BibTeX.cnf with new version
Creating config file /etc/texmf/texmf.d/75DviPS.cnf with new version
Creating config file /etc/texmf/texmf.d/85Misc.cnf with new version
Creating config file /etc/texmf/texmf.d/90TeXDoc.cnf with new version
Creating config file /etc/texmf/texmf.d/95NonPath.cnf with new version
Creating config file /etc/texmf/updmap.d/00updmap.cfg with new version
Creating config file /etc/texmf/texmf.cnf with new version
Running mktexlsr. This may take some time... done.
No packages found matching texlive-base.
dpkg: error processing tex-common (--configure):
subprocess installed post-installation script returned error exit status 1
dpkg: dependency problems prevent configuration of texlive-binaries:
texlive-binaries depends on tex-common (>= 2.00); however:
Package tex-common is not configured yet.
dpkg: error processing texlive-binaries (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of piuparts-depends-dummy:
piuparts-depends-dummy depends on texlive-base-bin; however:
Package texlive-base-bin is not installed.
Package texlive-binaries which provides texlive-base-bin is not configured yet.
dpkg: error processing piuparts-depends-dummy (--configure):
dependency problems - leaving unconfigured
Errors were encountered while processing:
tex-common
texlive-binaries
piuparts-depends-dummy
E: Sub-process /usr/bin/dpkg returned an error code (1)
0m16.7s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpwvwVQo', 'umount', '/proc']
0m16.7s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpwvwVQo', 'umount', '/proc']
0m17.2s DEBUG: Removed directory tree at /org/piuparts.debian.org/tmp/tmpwvwVQo
End: 2010-02-25 14:29:28 UTC
Attachment:
signature.asc
Description: This is a digitally signed message part.