[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#985562: libclutter-imcontext-0.1-bin: post-installation script subprocess - error exit status 1



Package: upgrade-reports
Severity: normal
Tags: d-i

(Please provide enough information to help the Debian
maintainers evaluate the report efficiently - e.g., by filling
in the sections below.)

My previous release is: buster
I am upgrading to: bullseye
Archive date: not applicable
Upgrade date: 2021-03-19  13:11:52 (GMT+1)
uname -a before upgrade: <The result of running uname -a on a shell prompt>
uname -a after upgrade: <The result of running uname -a on a shell prompt>
Method: 1. clear all lines in sources.list and use only: "deb
http://deb.debian.org/debian/ bullseye contrib non-free main"
        3. sudo apt update
        4. sudo apt upgrade

Contents of /etc/apt/sources.list:
the following line only:
deb http://deb.debian.org/debian/ bullseye contrib non-free main

- Were there any non-Debian packages installed before the upgrade?  If
  so, what were they?
        non free firmwares 20190114-2 (required by installer: firmware intel-
wimax/stable,  iwlwifi/stable)
        virtualbox 6.1 (Oracle, non-free, but from Debian buster repo)

- Was the system pre-update a pure sarge system? If not, which packages
  were not from sarge?
        Cannot answer to the question as I don't know what a "pure sarge"
system is.

- Did any packages fail to upgrade?
        Yes but not completely - Configuration time errors during like:
FYI: "Paramétrage" ~= "Setting up"

Paramétrage de libclutter-imcontext-0.1-bin (0.1.4-3.1) ...
Cannot load module /usr/lib/x86_64-linux-gnu/clutter-imcontext/immodules/im-
ibus.so: GModule (/usr/lib/x86_64-linux-gnu/clutter-imcontext/immodules/im-
ibus.so) initialization check failed: GLib version too old (micro mismatch)
/usr/lib/x86_64-linux-gnu/clutter-imcontext/immodules/im-ibus.so does not
export Clutter IM module API: GModule (/usr/lib/x86_64-linux-gnu/clutter-
imcontext/immodules/im-ibus.so) initialization check failed: GLib version too
old (micro mismatch)
dpkg: erreur de traitement du paquet libclutter-imcontext-0.1-bin
(--configure) :
 installed libclutter-imcontext-0.1-bin package post-installation script
subprocess returned error exit status 1

        apt upgrade last lines:
FYI:    "Des erreurs ont été rencontrées pendant l'exécution"  ~= "errors
encountered during execution"

        Des erreurs ont été rencontrées pendant l'exécution :
        libclutter-imcontext-0.1-bin
        ibus-clutter:amd64
        Log ended: 2021-03-19  13:39:05


- Were there any problems with the system after upgrading?

        In an attempt to finalize upgrade, I ran "sudo apt dist-upgrade" right
after the end of "sudo apt update" execution.
        At +/- 30% of "dist-upgrade" execution, display went "off", then "on"
(like in a power-off power-on cycle, there was no backlight and display was not
"greyish") showing a dash on top replaced by an arrow in the center of the
screen. Arrow and dash were alternatively blinking at a cycle of approx 3/sec
(if unclear, I've got a 10 sec video clip of the incident). As there was still
disk activity, I decided to wait for the disk to become quiet, not interrupting
a possible still working execution. After 10 min (or so, as 10 min ss the
session auto-lock inactivity delay, read further) the display went back to
life. Lightdm greeter lock screen was on, asking for password. I could log back
on flawlessly and installation process was at 82% this time. Installation went
fine, no errors. I rebooted the system and got a bullseye working without
critical error.

Further Comments/Problems:


Please attach the output of "COLUMNS=200 dpkg -l" (or "env COLUMNS ...",
depending on your shell) from before and after the upgrade so that we
know what packages were installed on your system.

Attachment: requested-dpkg-l.tar.gz
Description: application/gzip

Attachment: bugreport-additional-info.tar.gz
Description: application/gzip


Reply to: