Bug#786942: upgrade-reports: wheezy -> jessie boot lock up "A start job is running for udev wait for Complete Device Initialization"
Package: upgrade-reports
Severity: important
I was able to boot by selecting an older kernel - I then was able to run:
# systemctl mask systemd-udev-settle
and 3.16.0-4-amd64 now boots.
This apparently is related to Intel + ssd (drive details below)
I found bread crumbs here - https://bbs.archlinux.org/viewtopic.php?id=189106
But in this case it just hung for over 10min. I would be glad to provide more
information if needed and test fixes. Please be specific.
-- System Information:
Debian Release: 8.0
APT prefers stable
APT policy: (990, 'stable'), (500, 'stable-updates')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.16.0-4-amd64 (SMP w/8 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
93: IDE 100.0: 10600 Disk
[Created at block.245]
Unique ID: WZeP.ffmJJzzGID6
Parent ID: w7Y8.mL+OcbU+PEA
SysFS ID: /class/block/sdb
SysFS BusID: 1:0:0:0
SysFS Device Link: /devices/pci0000:00/0000:00:1f.2/ata2/host1/target1:0:0/1:0:0:0
Hardware Class: disk
Model: "INTEL SSDSA2CT04"
Vendor: "INTEL"
Device: "SSDSA2CT04"
Revision: "0302"
Serial ID: "CVPR13010ABF040AGN"
Driver: "ahci", "sd"
Driver Modules: "ahci"
Device File: /dev/sdb
Device Files: /dev/sdb, /dev/disk/by-id/ata-INTEL_SSDSA2CT040G3_CVPR13010ABF040AGN, /dev/disk/by-id/wwn-0x500151795961423c
Device Number: block 8:16-8:31
Geometry (Logical): CHS 4865/255/63
Size: 78165360 sectors a 512 bytes
Capacity: 37 GB (40020664320 bytes)
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #35 (SATA controller)
Reply to: