Your message dated Thu, 18 Dec 2014 20:20:16 +0100 with message-id <201412182020.24642.holger@layer-acht.org> and subject line Re: Bug#773467: efikamx: linux-image-3.2.0-4-mx5 is not upgraded to linux-image-armmp (and that one doesn't work) has caused the Debian Bug report #773467, regarding efikamx: linux-image-3.2.0-4-mx5 is not upgraded to linux-image-armmp (and that one doesn't work) to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 773467: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=773467 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: submit@bugs.debian.org
- Subject: efikamx: linux-image-3.2.0-4-mx5 is not upgraded to linux-image-armmp (and that one doesn't work)
- From: Holger Levsen <holger@layer-acht.org>
- Date: Thu, 18 Dec 2014 19:13:02 +0100
- Message-id: <[🔎] 201412181913.11158.holger@layer-acht.org>
Package: src:linux,upgrade-reports Version: 3.16.7-ckt2-1 Severity: important Dear maintainers, I've just upgraded my Genesi EfikaMX nettop from wheezy to jessie and the only package which wasn't upgraded was linux-image-3.2.0-4-mx5, so I had to install linux-image-armmp manually... I'm not really sure how to solve this sensibly, suggesting that linux-image-armmp should provide linux-image-3.2.0-4-mx5 seems strange. Besides that the upgrade when flawlessly, but the system only has 450 packages installed anyway. But still, very neat! "Just this"...: root@efikamx:~# apt-get install linux-image-armmp Reading package lists... Done Building dependency tree Reading state information... Done The following extra packages will be installed: linux-image-3.16.0-4-armmp Suggested packages: linux-doc-3.16 debian-kernel-handbook fdutils Recommended packages: irqbalance The following NEW packages will be installed: linux-image-3.16.0-4-armmp linux-image-armmp 0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded. Need to get 24.6 MB of archives. After this operation, 104 MB of additional disk space will be used. Do you want to continue? [Y/n] Get:1 http://ftp.de.debian.org/debian/ jessie/main linux-image-3.16.0-4-armmp armhf 3.16.7-ckt2-1 [24.6 MB Get:2 http://ftp.de.debian.org/debian/ jessie/main linux-image-armmp armhf 3.16+63 [5368 B] Fetched 24.6 MB in 7s (3394 kB/s) Preconfiguring packages ... Selecting previously unselected package linux-image-3.16.0-4-armmp. (Reading database ... 43566 files and directories currently installed.) Preparing to unpack .../linux-image-3.16.0-4-armmp_3.16.7-ckt2-1_armhf.deb ... Unpacking linux-image-3.16.0-4-armmp (3.16.7-ckt2-1) ... Selecting previously unselected package linux-image-armmp. Preparing to unpack .../linux-image-armmp_3.16+63_armhf.deb ... Unpacking linux-image-armmp (3.16+63) ... Setting up linux-image-3.16.0-4-armmp (3.16.7-ckt2-1) ... /etc/kernel/postinst.d/initramfs-tools: update-initramfs: Generating /boot/initrd.img-3.16.0-4-armmp flash-kernel: deferring update (trigger activated) /etc/kernel/postinst.d/zz-flash-kernel: flash-kernel: deferring update (trigger activated) Setting up linux-image-armmp (3.16+63) ... Processing triggers for flash-kernel (3.28) ... flash-kernel: installing version 3.16.0-4-armmp Generating kernel u-boot image... done. Taking backup of uImage. Installing new uImage. Generating initramfs u-boot image... done. Taking backup of uInitrd. Installing new uInitrd. Generating boot script u-boot image... done. Taking backup of boot.scr. Installing new boot.scr. root@efikamx:~# And now let's see how it reboots :-) ... It didn't come back, will need to attach a serial console and see if I see anything useful there... cheers, Holger -- Package-specific info: ** Version: Linux version 3.2.0-4-mx5 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 Debian 3.2.63-2+deb7u2 ** Command line: console=ttymxc0,115200 console=tty1 rootwait rw ** Not tainted ** Kernel log: [ 1.634403] usb usb2: Product: Freescale On-Chip EHCI Host Controller [ 1.640871] usb usb2: Manufacturer: Linux 3.2.0-4-mx5 ehci_hcd [ 1.646730] usb usb2: SerialNumber: mxc-ehci.1 [ 1.651779] hub 2-0:1.0: USB hub found [ 1.655586] hub 2-0:1.0: 1 port detected [ 1.660144] mousedev: PS/2 mouse device common for all mice [ 1.666960] mc13xxx-rtc mc13892-rtc: rtc core: registered mc13892-rtc as rtc0 [ 1.674393] Registered led device: efikamx:green [ 1.674512] Registered led device: efikamx:red [ 1.674621] Registered led device: efikamx:blue [ 1.675527] usbcore: registered new interface driver usbhid [ 1.681119] usbhid: USB HID core driver [ 1.685750] TCP cubic registered [ 1.689003] NET: Registered protocol family 17 [ 1.693491] Registering the dns_resolver key type [ 1.698283] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 2 [ 1.707206] registered taskstats version 1 [ 1.711726] regulator_init_complete: VCAM: disabling [ 1.716931] regulator_init_complete: VAUDIO: disabling [ 1.722306] regulator_init_complete: VVIDEO: disabling [ 1.727723] regulator_init_complete: VSD: disabling [ 1.733070] mc13xxx-rtc mc13892-rtc: setting system clock to 2014-12-18 15:30:20 UTC (1418916620) [ 1.742030] Initializing network drop monitor service [ 1.747919] Freeing init memory: 128K [ 1.784810] usb 1-1: new high-speed USB device number 2 using mxc-ehci [ 1.835537] udevd[46]: starting version 175 [ 1.959704] usb 1-1: New USB device found, idVendor=0b95, idProduct=772a [ 1.966519] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.973672] usb 1-1: Product: AX88x72A [ 1.977464] usb 1-1: Manufacturer: ASIX Elec. Corp. [ 1.982355] usb 1-1: SerialNumber: 123456 [ 2.127645] imx-sdma imx35-sdma: firmware: agent aborted loading sdma-imx51.bin (not found?) [ 2.191592] sdhci: Secure Digital Host Controller Interface driver [ 2.197887] sdhci: Copyright(c) Pierre Ossman [ 2.212784] SCSI subsystem initialized [ 2.216711] usb 2-1: new high-speed USB device number 2 using mxc-ehci [ 2.265355] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.309792] Registered led device: mmc0:: [ 2.315614] mmc0: SDHCI controller on sdhci-esdhc-imx51.0 [sdhci-esdhc-imx51.0] using ADMA [ 2.430258] libata version 3.00 loaded. [ 2.439662] scsi0 : pata_imx [ 2.443016] ata1: PATA max PIO0 cmd 0x83fe00a0 ctl 0x83fe00d8 irq 70 [ 2.450216] usb 2-1: New USB device found, idVendor=1a40, idProduct=0101 [ 2.456984] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.464137] usb 2-1: Product: USB 2.0 Hub [MTT] [ 2.506866] hub 2-1:1.0: USB hub found [ 2.512379] hub 2-1:1.0: 4 ports detected [ 2.659395] mmc0: new high speed SDHC card at address e624 [ 2.667913] ata1.00: ATA-8: SanDisk pSSD-P2 8GB, SSD 5.20, max UDMA/133 [ 2.674568] ata1.00: 15649200 sectors, multi 0: LBA48 [ 2.679794] ata1.00: configured for PIO [ 2.684197] scsi 0:0:0:0: Direct-Access ATA SanDisk pSSD-P2 SSD PQ: 0 ANSI: 5 [ 2.714826] mmcblk0: mmc0:e624 SU08G 7.40 GiB [ 2.728527] mmcblk0: p1 p2 p3 < p5 > [ 2.735625] sd 0:0:0:0: [sda] 15649200 512-byte logical blocks: (8.01 GB/7.46 GiB) [ 2.747542] sd 0:0:0:0: [sda] Write Protect is off [ 2.752371] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.752504] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.767134] sda: sda1 sda2 [ 2.772096] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.797540] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.844937] usb 2-1.1: new high-speed USB device number 3 using mxc-ehci [ 2.986887] usb 2-1.1: New USB device found, idVendor=13d3, idProduct=3273 [ 2.993858] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.001224] usb 2-1.1: Product: 802.11 n WLAN [ 3.005658] usb 2-1.1: Manufacturer: Ralink [ 3.009852] usb 2-1.1: SerialNumber: 1.0 [ 3.484490] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 4.690364] udevd[266]: starting version 175 [ 5.092185] m25p80 spi0.1: sst25vf032b (4096 Kbytes) [ 5.163065] Creating 2 MTD partitions on "spi_flash": [ 5.179067] 0x000000000000-0x000000040000 : "u-boot" [ 5.220392] 0x000000040000-0x000000050000 : "config" [ 5.322499] cfg80211: Calling CRDA to update world regulatory domain [ 5.438127] asix 1-1:1.0: eth0: register 'asix' at usb-mxc-ehci.0-1, ASIX AX88772 USB 2.0 Ethernet, 70:71:bc:4e:f7:57 [ 5.521982] usbcore: registered new interface driver asix [ 5.665114] usb 2-1.1: reset high-speed USB device number 3 using mxc-ehci [ 5.944529] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 5.945999] Registered led device: rt2800usb-phy0::radio [ 5.946115] Registered led device: rt2800usb-phy0::assoc [ 5.946237] Registered led device: rt2800usb-phy0::quality [ 5.946333] usbcore: registered new interface driver rt2800usb [ 7.135011] Adding 379900k swap on /dev/mmcblk0p5. Priority:-1 extents:1 across:379900k SS [ 7.476988] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [ 7.907132] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro [ 8.202491] loop: module loaded [ 13.174181] NET: Registered protocol family 10 [ 14.698079] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 14.725194] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 14.745157] asix 1-1:1.0: eth0: link down [ 14.823104] RPC: Registered named UNIX socket transport module. [ 14.829141] RPC: Registered udp transport module. [ 14.833858] RPC: Registered tcp transport module. [ 14.838589] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 14.881061] FS-Cache: Loaded [ 14.956692] FS-Cache: Netfs 'nfs' registered for caching [ 15.003245] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 16.646911] asix 1-1:1.0: eth0: link up, 100Mbps, full-duplex, lpa 0xC1E1 [ 24.924727] eth0: no IPv6 routers present [ 4094.370238] systemd-udevd[4225]: starting version 215 ** Model information Processor : ARMv7 Processor rev 5 (v7l) Hardware : Genesi EfikaMX nettop Revision : 0013 ** Loaded modules: nfsd nfs nfs_acl auth_rpcgss fscache lockd sunrpc ipv6 ext2 loop arc4 rt2800usb rt2800lib crc_ccitt rt2x00usb rt2x00lib mac80211 cfg80211 rfkill asix usbnet m25p80 mii mtd ext4 crc16 jbd2 mbcache sg sd_mod crc_t10dif mmc_block pata_imx libata sdhci_esdhc_imx sdhci_pltfm scsi_mod sdhci mmc_core ** PCI devices: not available ** USB devices: Bus 002 Device 003: ID 13d3:3273 IMC Networks 802.11 n/g/b Wireless LAN USB Mini-Card Bus 002 Device 002: ID 1a40:0101 Terminus Technology Inc. 4-Port HUB Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 0b95:772a ASIX Electronics Corp. AX88772A Fast Ethernet Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: 8.0 APT prefers testing APT policy: (500, 'testing') Architecture: armhf (armv7l) Kernel: Linux 3.2.0-4-mx5 Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Shell: /bin/sh linked to /bin/dash Init: unable to detect Versions of packages linux-image-3.2.0-4-mx5 depends on: ii debconf [debconf-2.0] 1.5.54 ii initramfs-tools [linux-initramfs-tool] 0.116 ii kmod 18-3 ii linux-base 3.5 Versions of packages linux-image-3.2.0-4-mx5 recommends: ii firmware-linux-free 3.3 Versions of packages linux-image-3.2.0-4-mx5 suggests: pn debian-kernel-handbook <none> pn fdutils <none> pn linux-doc-3.2 <none> Versions of packages linux-image-3.2.0-4-mx5 is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> ii firmware-linux 0.43 ii firmware-linux-nonfree 0.43 pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> pn firmware-realtek <none> pn xen-hypervisor <none> -- debconf information: linux-image-3.2.0-4-mx5/postinst/ignoring-ramdisk: linux-image-3.2.0-4-mx5/postinst/depmod-error-initrd-3.2.0-4-mx5: false linux-image-3.2.0-4-mx5/postinst/missing-firmware-3.2.0-4-mx5: linux-image-3.2.0-4-mx5/prerm/removing-running-kernel-3.2.0-4-mx5: trueAttachment: signature.asc
Description: This is a digitally signed message part.
--- End Message ---
--- Begin Message ---
- To: 773467-done@bugs.debian.org
- Subject: Re: Bug#773467: efikamx: linux-image-3.2.0-4-mx5 is not upgraded to linux-image-armmp (and that one doesn't work)
- From: Holger Levsen <holger@layer-acht.org>
- Date: Thu, 18 Dec 2014 20:20:16 +0100
- Message-id: <201412182020.24642.holger@layer-acht.org>
- In-reply-to: <[🔎] 1418928719.26985.90.camel@debian.org>
- References: <[🔎] 201412181913.11158.holger@layer-acht.org> <[🔎] 1418928719.26985.90.camel@debian.org>
Hi Ian, thanks for the fast response! On Donnerstag, 18. Dezember 2014, Ian Campbell wrote: > But. I don't think any modern kernel supports the efika, it was removed > from the mainline kernel a while ago (summer 2012 it seems [0]) and was > therefore removed from the installer on that basis too[1] thanks, I was looking for this information (as I saw in the jessie d-i beta1 release notes that support for efikamx was removed, but I couldn't really find out why..) and then I saw this in the linux debian/changelog from 3.11.5-1 from October 2013: * [armhf] Remove mx5, omap and vexpress flavours. These are all supported by the multiplatform flavour. That sounded promising enough, so I gave upgrading a try... > > It didn't come back, will need to attach a serial console and see if I > > see anything useful there... I wonder if I should still bother... > From what I gather this is not unexpected. I'm not sure why this > platform was removed upstream, [...] > Sorry, I expect none of this was what you wanted to hear :-( Indeed, but thanks for explaining! I'll guess I'll go with owning another brick then ;-) cheers, HolgerAttachment: signature.asc
Description: This is a digitally signed message part.
--- End Message ---