Bug#607581: upgrade-reports: lenny->squeeze; OK so far, except X11 is a no-go
On Mon, Dec 20, 2010 at 01:55:56PM +0100, Julien Cristau wrote:
> On Sun, Dec 19, 2010 at 18:41:29 -0500, CJ Fearnley wrote:
>
> > (EE) intel(0): No kernel modesetting driver detected.
> > (II) UnloadModule: "intel"
>
> Please attach your dmesg and output of '/sbin/modprobe -c'
>
> Cheers,
> Julien
Julien,
I got X11 working by installing the firmware-linux package and rebooting.
I attached the dmesg output anyway. Let me know if modprobe -c is
important for you to track down the cause.
I ran into another problem: lircd has broken on the upgrade.
I built my lirc kernel module in the usual way (m-a -t a-i lirc) and ran
"modprobe lirc_mceusb2". and the module loads fine as you can see from the
dmesg output. However,
$ sudo /etc/init.d/lirc start
Loading LIRC modules:.
Starting remote control daemon(s) : LIRC : failed!
Starting remote control mouse daemon : LIRCMD :lircmd: could not connect to
socket
lircmd: No such file or directory
failed!
My lirc device looks OK:
$ ls -l /dev/lirc0
crw-rw---- 1 root video 61, 0 Dec 19 18:43 /dev/lirc0
And when I push a button on the remote, the light blinks.
$ sudo /etc/init.d/lirc restart
Stopping remote control mouse daemon: LIRCMD: failed!
Stopping remote control daemon(s): LIRC: failed!
Loading LIRC modules:.
Starting remote control daemon(s) : LIRC : failed!
Starting remote control mouse daemon : LIRCMD :lircmd: could not connect to
socket
lircmd: Connection refused
failed!
Once when I restarted lirc, I got this (but it is not repeatable):
Dec 23 18:36:35 tetrahelix lircd-0.8.3[4143]: accepted new client on /dev/lircd
Dec 23 18:36:35 tetrahelix lircd-0.8.3[4143]: could not get file information for /dev/lirc
Dec 23 18:36:35 tetrahelix lircd-0.8.3[4143]: default_init(): No such file or directory
Dec 23 18:36:35 tetrahelix lircd-0.8.3[4143]: caught signal
/dev/lircd is a socket:
$ ls -l /dev/lircd
srw-rw-rw- 1 root root 0 Dec 23 18:34 /dev/lircd=
Same deal with dpkg-reconfigure:
$ sudo dpkg-reconfigure lirc
Stopping remote control mouse daemon: LIRCMD: failed!
Stopping remote control daemon(s): LIRC: failed!
.udevdb or .udev presence implies active udev. Aborting MAKEDEV invocation.
Loading LIRC modules:.
Starting remote control daemon(s) : LIRC : failed!
Starting remote control mouse daemon : LIRCMD :lircmd: could not connect to
socket
lircmd: Connection refused
failed!
I can corroborate bug #551706: installing the Lenny versions of lirc
and lirc-x 0.8.3-3 fixed the remote control.
--
CJ Fearnley | LinuxForce Inc.
cjf@LinuxForce.net | IT Projects & Systems Maintenance
http://www.LinuxForce.net | http://blog.remoteresponder.net
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-686 (Debian 2.6.32-29) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Fri Dec 10 16:12:40 UTC 2010
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
[ 0.000000] BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cf590000 (usable)
[ 0.000000] BIOS-e820: 00000000cf590000 - 00000000cf5e3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cf5e3000 - 00000000cf5f0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cf5f0000 - 00000000cf600000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
[ 0.000000] DMI 2.5 present.
[ 0.000000] last_pfn = 0xcf590 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CAFFF write-protect
[ 0.000000] CB000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 100000000 mask FE0000000 write-back
[ 0.000000] 1 base 120000000 mask FF0000000 write-back
[ 0.000000] 2 base 000000000 mask F80000000 write-back
[ 0.000000] 3 base 080000000 mask FC0000000 write-back
[ 0.000000] 4 base 0C0000000 mask FF0000000 write-back
[ 0.000000] 5 base 0CF700000 mask FFFF00000 uncachable
[ 0.000000] 6 base 0CF800000 mask FFF800000 uncachable
[ 0.000000] 7 base 0CF600000 mask FFFF00000 uncachable
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000cf600000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000373fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037000000 page 2M
[ 0.000000] 0037000000 - 00373fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 373fe000 @ 7000-d000
[ 0.000000] RAMDISK: 37c3b000 - 37fef838
[ 0.000000] Allocated new RAMDISK: 00100000 - 004b4838
[ 0.000000] Move RAMDISK from 0000000037c3b000 - 0000000037fef837 to 00100000 - 004b4837
[ 0.000000] ACPI: RSDP 000f97a0 00024 (v02 DELL )
[ 0.000000] ACPI: XSDT cf5e3080 0005C (v01 DELL FX09 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP cf5e7200 000F4 (v03 DELL FX09 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT cf5e3200 03FFC (v01 DELL AWRDACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS cf590000 00040
[ 0.000000] ACPI: HPET cf5e73c0 00038 (v01 DELL FX09 42302E31 AWRD 00000098)
[ 0.000000] ACPI: MCFG cf5e7400 0003C (v01 DELL FX09 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DMY1 cf5e7440 00176 (v01 DELL FX09 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DMY2 cf5e75c0 00080 (v01 DELL FX09 42302E31 AWRD 00000000)
[ 0.000000] ACPI: APIC cf5e7300 00084 (v01 DELL FX09 42302E31 AWRD 00000000)
[ 0.000000] ACPI: SSDT cf5e7ca0 00380 (v01 PmRef CpuPm 00003000 INTL 20041203)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 2433MB HIGHMEM available.
[ 0.000000] 883MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 373fe000
[ 0.000000] low ram: 0 - 373fe000
[ 0.000000] node 0 low ram: 00000000 - 373fe000
[ 0.000000] node 0 bootmap 00009000 - 0000fe80
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0001000000 - 00014c9bb4] TEXT DATA BSS ==> [0001000000 - 00014c9bb4]
[ 0.000000] #4 [000009e800 - 0000100000] BIOS reserved ==> [000009e800 - 0000100000]
[ 0.000000] #5 [00014ca000 - 00014d00e4] BRK ==> [00014ca000 - 00014d00e4]
[ 0.000000] #6 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000]
[ 0.000000] #7 [0000100000 - 00004b4838] NEW RAMDISK ==> [0000100000 - 00004b4838]
[ 0.000000] #8 [0000009000 - 0000010000] BOOTMAP ==> [0000009000 - 0000010000]
[ 0.000000] found SMP MP-table at [c00f3f00] f3f00
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000373fe
[ 0.000000] HighMem 0x000373fe -> 0x000cf590
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x000cf590
[ 0.000000] On node 0 totalpages: 849198
[ 0.000000] free_area_init_node: node 0, pgdat c13b2860, node_mem_map c14d2000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3966 pages, LIFO batch:0
[ 0.000000] Normal zone: 1736 pages used for memmap
[ 0.000000] Normal zone: 220470 pages, LIFO batch:31
[ 0.000000] HighMem zone: 4868 pages used for memmap
[ 0.000000] HighMem zone: 618126 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at cf600000 (gap: cf600000:10a00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c3000000 s34296 r0 d23048 u1048576
[ 0.000000] pcpu-alloc: s34296 r0 d23048 u1048576 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 842562
[ 0.000000] Kernel command line: root=/dev/mapper/tetrahelix-root ro
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000373fe:000cf590)
[ 0.000000] Memory: 3359252k/3397184k available (2500k kernel code, 36408k reserved, 1324k data, 376k init, 2491976k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB)
[ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.000000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
[ 0.000000] .init : 0xc13bd000 - 0xc141b000 ( 376 kB)
[ 0.000000] .data : 0xc12713d9 - 0xc13bc460 (1324 kB)
[ 0.000000] .text : 0xc1000000 - 0xc12713d9 (2500 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:1280
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2394.214 MHz processor.
[ 0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.42 BogoMIPS (lpj=9576856)
[ 0.004117] Security Framework initialized
[ 0.004168] SELinux: Disabled at boot.
[ 0.004218] Mount-cache hash table entries: 512
[ 0.004372] Initializing cgroup subsys ns
[ 0.004421] Initializing cgroup subsys cpuacct
[ 0.004471] Initializing cgroup subsys devices
[ 0.004519] Initializing cgroup subsys freezer
[ 0.004567] Initializing cgroup subsys net_cls
[ 0.004634] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004703] CPU: L2 cache: 2048K
[ 0.004749] CPU: Physical Processor ID: 0
[ 0.004796] CPU: Processor Core ID: 0
[ 0.004844] mce: CPU supports 6 MCE banks
[ 0.004896] CPU0: Thermal monitoring enabled (TM2)
[ 0.004946] using mwait in idle threads.
[ 0.004997] Performance Events: Core2 events, Intel PMU driver.
[ 0.005092] ... version: 2
[ 0.005139] ... bit width: 40
[ 0.005186] ... generic registers: 2
[ 0.005234] ... value mask: 000000ffffffffff
[ 0.005284] ... max period: 000000007fffffff
[ 0.005334] ... fixed-purpose events: 3
[ 0.005381] ... event mask: 0000000700000003
[ 0.005433] Checking 'hlt' instruction... OK.
[ 0.021082] ACPI: Core revision 20090903
[ 0.028052] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.028413] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.071073] CPU0: Intel(R) Core(TM)2 Duo CPU E4600 @ 2.40GHz stepping 0d
[ 0.072001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.008000] Initializing CPU#1
[ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.008000] CPU: L2 cache: 2048K
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 1
[ 0.008000] CPU1: Thermal monitoring enabled (TM2)
[ 0.156062] CPU1: Intel(R) Core(TM)2 Duo CPU E4600 @ 2.40GHz stepping 0d
[ 0.156429] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.160047] Brought up 2 CPUs
[ 0.160095] Total of 2 processors activated (9576.39 BogoMIPS).
[ 0.160530] CPU0 attaching sched-domain:
[ 0.160533] domain 0: span 0-1 level MC
[ 0.160535] groups: 0 1
[ 0.160540] CPU1 attaching sched-domain:
[ 0.160542] domain 0: span 0-1 level MC
[ 0.160544] groups: 1 0
[ 0.160596] devtmpfs: initialized
[ 0.160596] regulator: core version 0.5
[ 0.160596] NET: Registered protocol family 16
[ 0.160596] ACPI: bus type pci registered
[ 0.160596] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.160596] PCI: MCFG area at e0000000 reserved in E820
[ 0.160596] PCI: Using MMCONFIG for extended config space
[ 0.160596] PCI: Using configuration type 1 for base access
[ 0.160769] bio: create slab <bio-0> at 0
[ 0.160769] ACPI: EC: Look up EC in DSDT
[ 0.167083] ACPI: Interpreter enabled
[ 0.167132] ACPI: (supports S0 S3 S4 S5)
[ 0.167272] ACPI: Using IOAPIC for interrupt routing
[ 0.170694] ACPI: No dock devices found.
[ 0.170816] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.170956] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.171730] pci 0000:00:01.0: PME# disabled
[ 0.171798] pci 0000:00:02.0: reg 10 32bit mmio: [0xfdf00000-0xfdf7ffff]
[ 0.171803] pci 0000:00:02.0: reg 14 io port: [0xff00-0xff07]
[ 0.171807] pci 0000:00:02.0: reg 18 32bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.171812] pci 0000:00:02.0: reg 1c 32bit mmio: [0xfdc00000-0xfdcfffff]
[ 0.171882] pci 0000:00:19.0: reg 10 32bit mmio: [0xfdfc0000-0xfdfdffff]
[ 0.171888] pci 0000:00:19.0: reg 14 32bit mmio: [0xfdfff000-0xfdffffff]
[ 0.171894] pci 0000:00:19.0: reg 18 io port: [0xfe00-0xfe1f]
[ 0.171930] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.171984] pci 0000:00:19.0: PME# disabled
[ 0.172047] pci 0000:00:1a.0: reg 20 io port: [0xfd00-0xfd1f]
[ 0.172111] pci 0000:00:1a.1: reg 20 io port: [0xfc00-0xfc1f]
[ 0.172174] pci 0000:00:1a.2: reg 20 io port: [0xfb00-0xfb1f]
[ 0.172241] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfdffe000-0xfdffe3ff]
[ 0.172292] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.172346] pci 0000:00:1a.7: PME# disabled
[ 0.172428] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfdff4000-0xfdff7fff]
[ 0.172467] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.172520] pci 0000:00:1b.0: PME# disabled
[ 0.172613] pci 0000:00:1d.0: reg 20 io port: [0xfa00-0xfa1f]
[ 0.172677] pci 0000:00:1d.1: reg 20 io port: [0xf900-0xf91f]
[ 0.172740] pci 0000:00:1d.2: reg 20 io port: [0xf800-0xf81f]
[ 0.172807] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfdffd000-0xfdffd3ff]
[ 0.172857] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.172911] pci 0000:00:1d.7: PME# disabled
[ 0.173073] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
[ 0.173147] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
[ 0.173202] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 003f)
[ 0.173276] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 003f)
[ 0.173395] pci 0000:00:1f.2: reg 10 io port: [0xf700-0xf707]
[ 0.173401] pci 0000:00:1f.2: reg 14 io port: [0xf600-0xf603]
[ 0.173406] pci 0000:00:1f.2: reg 18 io port: [0xf500-0xf507]
[ 0.173411] pci 0000:00:1f.2: reg 1c io port: [0xf400-0xf403]
[ 0.173416] pci 0000:00:1f.2: reg 20 io port: [0xf300-0xf30f]
[ 0.173422] pci 0000:00:1f.2: reg 24 io port: [0xf200-0xf20f]
[ 0.173464] pci 0000:00:1f.3: reg 10 64bit mmio: [0xfdffc000-0xfdffc0ff]
[ 0.173477] pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f]
[ 0.173516] pci 0000:00:1f.5: reg 10 io port: [0xf000-0xf007]
[ 0.173522] pci 0000:00:1f.5: reg 14 io port: [0xef00-0xef03]
[ 0.173527] pci 0000:00:1f.5: reg 18 io port: [0xee00-0xee07]
[ 0.173532] pci 0000:00:1f.5: reg 1c io port: [0xed00-0xed03]
[ 0.173537] pci 0000:00:1f.5: reg 20 io port: [0xec00-0xec0f]
[ 0.173543] pci 0000:00:1f.5: reg 24 io port: [0xeb00-0xeb0f]
[ 0.173603] pci 0000:00:01.0: bridge io port: [0xc000-0xcfff]
[ 0.173606] pci 0000:00:01.0: bridge 32bit mmio: [0xfde00000-0xfdefffff]
[ 0.173610] pci 0000:00:01.0: bridge 64bit mmio pref: [0xfdb00000-0xfdbfffff]
[ 0.173642] pci 0000:02:00.0: reg 10 32bit mmio: [0xfbfff000-0xfbffffff]
[ 0.173685] pci 0000:02:00.0: supports D1 D2
[ 0.173687] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot
[ 0.173740] pci 0000:02:00.0: PME# disabled
[ 0.173826] pci 0000:02:01.0: reg 10 32bit mmio: [0xf4000000-0xf7ffffff]
[ 0.173918] pci 0000:00:1e.0: transparent bridge
[ 0.173968] pci 0000:00:1e.0: bridge io port: [0xd000-0xdfff]
[ 0.173972] pci 0000:00:1e.0: bridge 32bit mmio: [0xf4000000-0xfbffffff]
[ 0.173977] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xfdd00000-0xfddfffff]
[ 0.173986] pci_bus 0000:00: on NUMA node 0
[ 0.173990] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.174133] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.187757] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 0.188119] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.188549] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.188919] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.189289] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 0.189660] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 7 9 10 11 12 14 15)
[ 0.190029] ACPI: PCI Interrupt Link [LNK0] (IRQs *3 4 5 7 9 10 11 12 14 15)
[ 0.190398] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 *9 10 11 12 14 15)
[ 0.190761] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.190842] vgaarb: loaded
[ 0.190895] PCI: Using ACPI for IRQ routing
[ 0.190895] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.190895] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.196025] Switching to clocksource tsc
[ 0.197135] pnp: PnP ACPI init
[ 0.197188] ACPI: bus type pnp registered
[ 0.198542] pnp: PnP ACPI: found 11 devices
[ 0.198589] ACPI: ACPI bus type pnp unregistered
[ 0.198638] PnPBIOS: Disabled by ACPI PNP
[ 0.198691] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 0.198744] system 00:01: ioport range 0x800-0x87f has been reserved
[ 0.198799] system 00:01: ioport range 0x290-0x297 has been reserved
[ 0.198852] system 00:01: ioport range 0x880-0x88f has been reserved
[ 0.198908] system 00:07: ioport range 0x400-0x4bf could not be reserved
[ 0.198965] system 00:09: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.199022] system 00:0a: iomem range 0xf0000-0xfffff could not be reserved
[ 0.199077] system 00:0a: iomem range 0xcf600000-0xcf6fffff could not be reserved
[ 0.199150] system 00:0a: iomem range 0xfed00000-0xfed000ff has been reserved
[ 0.199205] system 00:0a: iomem range 0xcf590000-0xcf5fffff could not be reserved
[ 0.199277] system 00:0a: iomem range 0x0-0x9ffff could not be reserved
[ 0.199341] system 00:0a: iomem range 0x100000-0xcf58ffff could not be reserved
[ 0.199413] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.199486] system 00:0a: iomem range 0xfed14000-0xfed1dfff has been reserved
[ 0.199541] system 00:0a: iomem range 0xfed20000-0xfed9ffff has been reserved
[ 0.199596] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.199651] system 00:0a: iomem range 0xffb00000-0xffb7ffff has been reserved
[ 0.199707] system 00:0a: iomem range 0xfff00000-0xffffffff has been reserved
[ 0.199762] system 00:0a: iomem range 0xe0000-0xeffff has been reserved
[ 0.234466] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.234519] pci 0000:00:01.0: IO window: 0xc000-0xcfff
[ 0.234571] pci 0000:00:01.0: MEM window: 0xfde00000-0xfdefffff
[ 0.234624] pci 0000:00:01.0: PREFETCH window: 0x000000fdb00000-0x000000fdbfffff
[ 0.234699] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
[ 0.234751] pci 0000:00:1e.0: IO window: 0xd000-0xdfff
[ 0.234804] pci 0000:00:1e.0: MEM window: 0xf4000000-0xfbffffff
[ 0.234858] pci 0000:00:1e.0: PREFETCH window: 0x000000fdd00000-0x000000fddfffff
[ 0.234941] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.234996] pci 0000:00:01.0: setting latency timer to 64
[ 0.235002] pci 0000:00:1e.0: setting latency timer to 64
[ 0.235005] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.235007] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.235009] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff]
[ 0.235011] pci_bus 0000:01: resource 1 mem: [0xfde00000-0xfdefffff]
[ 0.235013] pci_bus 0000:01: resource 2 pref mem [0xfdb00000-0xfdbfffff]
[ 0.235016] pci_bus 0000:02: resource 0 io: [0xd000-0xdfff]
[ 0.235018] pci_bus 0000:02: resource 1 mem: [0xf4000000-0xfbffffff]
[ 0.235020] pci_bus 0000:02: resource 2 pref mem [0xfdd00000-0xfddfffff]
[ 0.235022] pci_bus 0000:02: resource 3 io: [0x00-0xffff]
[ 0.235024] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
[ 0.235046] NET: Registered protocol family 2
[ 0.235156] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.235445] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.235875] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.236125] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.236178] TCP reno registered
[ 0.236288] NET: Registered protocol family 1
[ 0.236354] pci 0000:00:02.0: Boot video device
[ 0.236504] Unpacking initramfs...
[ 0.321804] Freeing initrd memory: 3794k freed
[ 0.323822] audit: initializing netlink socket (disabled)
[ 0.323887] type=2000 audit(1292802192.323:1): initialized
[ 0.326870] highmem bounce pool size: 64 pages
[ 0.326921] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.328129] VFS: Disk quotas dquot_6.5.2
[ 0.328218] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.328333] msgmni has been set to 1703
[ 0.328540] alg: No test for stdrng (krng)
[ 0.328626] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.328699] io scheduler noop registered
[ 0.328746] io scheduler anticipatory registered
[ 0.328794] io scheduler deadline registered
[ 0.328870] io scheduler cfq registered (default)
[ 0.329017] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
[ 0.329023] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.329139] isapnp: Scanning for PnP cards...
[ 0.682108] isapnp: No Plug & Play device found
[ 0.683269] Linux agpgart interface v0.103
[ 0.683376] agpgart-intel 0000:00:00.0: Intel G33 Chipset
[ 0.683955] agpgart-intel 0000:00:00.0: detected 7164K stolen memory
[ 0.694883] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 0.694997] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.695376] PNP: No PS/2 controller found. Probing ports directly.
[ 0.695760] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.695814] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.695909] mice: PS/2 mouse device common for all mice
[ 0.695994] rtc_cmos 00:04: RTC can wake from S4
[ 0.696071] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.696143] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.696203] cpuidle: using governor ladder
[ 0.696250] cpuidle: using governor menu
[ 0.696299] No iBFT detected.
[ 0.696617] TCP cubic registered
[ 0.696773] NET: Registered protocol family 10
[ 0.697172] lo: Disabled Privacy Extensions
[ 0.697457] Mobile IPv6
[ 0.697501] NET: Registered protocol family 17
[ 0.697558] Using IPI No-Shortcut mode
[ 0.697652] PM: Resume from disk failed.
[ 0.697665] registered taskstats version 1
[ 0.698022] rtc_cmos 00:04: setting system clock to 2010-12-19 23:43:13 UTC (1292802193)
[ 0.698119] Initalizing network drop monitor service
[ 0.698187] Freeing unused kernel memory: 376k freed
[ 0.698373] Write protecting the kernel text: 2504k
[ 0.698439] Write protecting the kernel read-only data: 920k
[ 0.727065] SCSI subsystem initialized
[ 0.740373] libata version 3.00 loaded.
[ 0.742487] ata_piix 0000:00:1f.2: version 2.13
[ 0.742507] ata_piix 0000:00:1f.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.742565] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.742748] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.742792] scsi0 : ata_piix
[ 0.742896] scsi1 : ata_piix
[ 0.743527] ata1: SATA max UDMA/133 cmd 0xf700 ctl 0xf600 bmdma 0xf300 irq 19
[ 0.743585] ata2: SATA max UDMA/133 cmd 0xf500 ctl 0xf400 bmdma 0xf308 irq 19
[ 0.743678] ata_piix 0000:00:1f.5: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.743743] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 0.743919] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 0.743948] scsi2 : ata_piix
[ 0.744032] scsi3 : ata_piix
[ 0.744317] ata3: SATA max UDMA/133 cmd 0xf000 ctl 0xef00 bmdma 0xec00 irq 19
[ 0.744373] ata4: SATA max UDMA/133 cmd 0xee00 ctl 0xed00 bmdma 0xec08 irq 19
[ 1.074720] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.220049] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.234574] ata4.00: ATA-8: WDC WD2500AAJS-98VWA0, 12.01B02, max UDMA/133
[ 1.234637] ata4.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.249255] ata4.00: configured for UDMA/133
[ 1.540069] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.540143] ata2.01: SATA link down (SStatus 0 SControl 300)
[ 1.540208] ata2.01: link offline, clearing class 3 to NONE
[ 1.540312] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.540373] ata1.01: SATA link down (SStatus 0 SControl 300)
[ 1.548203] ata2.00: ATAPI: Optiarc DVD+/-RW AD-7200S, 101A, max UDMA/100
[ 1.549061] ata1.00: ATA-8: WDC WD1001FALS-00J7B0, 05.00K05, max UDMA/133
[ 1.549125] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.564360] ata2.00: configured for UDMA/100
[ 1.565115] ata1.00: configured for UDMA/133
[ 1.565241] scsi 0:0:0:0: Direct-Access ATA WDC WD1001FALS-0 05.0 PQ: 0 ANSI: 5
[ 1.567006] scsi 1:0:0:0: CD-ROM Optiarc DVD+-RW AD-7200S 101A PQ: 0 ANSI: 5
[ 1.567210] scsi 3:0:0:0: Direct-Access ATA WDC WD2500AAJS-9 12.0 PQ: 0 ANSI: 5
[ 1.580309] udevd version 125 started
[ 1.672344] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.672413] ACPI: Thermal Zone [THRM] (40 C)
[ 1.685446] fan PNP0C0B:00: registered as cooling_device0
[ 1.685504] ACPI: Fan [FAN] (on)
[ 1.712309] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.712332] sd 3:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.712374] sd 3:0:0:0: [sdb] Write Protect is off
[ 1.712376] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.712394] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.712503] sdb:
[ 1.712769] sd 0:0:0:0: [sda] Write Protect is off
[ 1.712887] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.712906] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.713948] sda: sdb1 sdb2
[ 1.720582] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 1.721952] sda1
[ 1.722211] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.007531] device-mapper: uevent: version 1.0.3
[ 2.007708] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 2.111244] PM: Starting manual resume from disk
[ 2.111313] PM: Resume from partition 254:1
[ 2.111315] PM: Checking hibernation image.
[ 2.117343] PM: Error -22 checking image file
[ 2.117346] PM: Resume from disk failed.
[ 2.122686] PM: Marking nosave pages: 000000000009e000 - 0000000000100000
[ 2.122691] PM: Basic memory bitmaps created
[ 2.132515] PM: Basic memory bitmaps freed
[ 2.164739] kjournald starting. Commit interval 5 seconds
[ 2.164753] EXT3-fs: mounted filesystem with ordered data mode.
[ 3.933505] udev[668]: starting version 164
[ 4.501825] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 4.501927] ACPI: Power Button [PWRB]
[ 4.502045] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 4.502184] ACPI: Power Button [PWRF]
[ 4.680889] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 4.682100] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 4.684739] ACPI: SSDT cf5e7680 002AE (v01 PmRef Cpu0Ist 00003000 INTL 20041203)
[ 4.685222] processor LNXCPU:00: registered as cooling_device1
[ 4.685485] ACPI: SSDT cf5e7b40 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20041203)
[ 4.685984] processor LNXCPU:01: registered as cooling_device2
[ 4.704525] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
[ 4.704579] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 4.704667] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 4.704727] e1000e 0000:00:19.0: setting latency timer to 64
[ 4.704809] e1000e 0000:00:19.0: irq 25 for MSI/MSI-X
[ 4.812726] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1d:09:98:97:6b
[ 4.812801] 0000:00:19.0: eth0: Intel(R) PRO/10/100 Network Connection
[ 4.812873] 0000:00:19.0: eth0: MAC: 7, PHY: 7, PBA No: ffffff-0ff
[ 4.869353] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 5.156096] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 5.156185] Uniform CD-ROM driver Revision: 3.20
[ 5.156313] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 5.279229] usbcore: registered new interface driver usbfs
[ 5.279317] usbcore: registered new interface driver hub
[ 5.280982] usbcore: registered new device driver usb
[ 5.294690] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.294796] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 5.295168] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 5.364458] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 5.364570] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 5.364649] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 5.364652] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 5.364726] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 5.364837] ehci_hcd 0000:00:1a.7: debug port 1
[ 5.368783] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 5.368805] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfdffe000
[ 5.384580] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 5.384682] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 5.384745] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.384817] usb usb1: Product: EHCI Host Controller
[ 5.384866] usb usb1: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
[ 5.384918] usb usb1: SerialNumber: 0000:00:1a.7
[ 5.385041] usb usb1: configuration #1 chosen from 1 choice
[ 5.385131] hub 1-0:1.0: USB hub found
[ 5.385190] hub 1-0:1.0: 6 ports detected
[ 5.385313] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 5.385415] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 5.385418] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 5.385476] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 5.385568] ehci_hcd 0000:00:1d.7: debug port 1
[ 5.389499] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 5.389513] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdffd000
[ 5.404535] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 5.404624] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 5.404689] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.404760] usb usb2: Product: EHCI Host Controller
[ 5.404809] usb usb2: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
[ 5.404861] usb usb2: SerialNumber: 0000:00:1d.7
[ 5.404971] usb usb2: configuration #1 chosen from 1 choice
[ 5.405052] hub 2-0:1.0: USB hub found
[ 5.405105] hub 2-0:1.0: 6 ports detected
[ 5.459493] [drm] Initialized drm 1.1.0 20060810
[ 5.460350] firewire_ohci 0000:02:00.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 5.532531] firewire_ohci: Added fw-ohci device 0000:02:00.0, OHCI version 1.10
[ 5.532683] firewire_ohci: swap not done yet
[ 5.532744] firewire_ohci: swap not done yet
[ 5.857267] uhci_hcd: USB Universal Host Controller Interface driver
[ 5.857459] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.857527] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 5.857531] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 5.857699] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 5.857807] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000fd00
[ 5.857891] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.857945] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.858016] usb usb3: Product: UHCI Host Controller
[ 5.858065] usb usb3: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 5.858116] usb usb3: SerialNumber: 0000:00:1a.0
[ 5.858231] usb usb3: configuration #1 chosen from 1 choice
[ 5.858347] hub 3-0:1.0: USB hub found
[ 5.858408] hub 3-0:1.0: 2 ports detected
[ 5.858509] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 5.858571] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 5.858574] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 5.858628] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 5.858718] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fc00
[ 5.858792] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.858846] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.858918] usb usb4: Product: UHCI Host Controller
[ 5.858967] usb usb4: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 5.859018] usb usb4: SerialNumber: 0000:00:1a.1
[ 5.859113] usb usb4: configuration #1 chosen from 1 choice
[ 5.859220] hub 4-0:1.0: USB hub found
[ 5.859275] hub 4-0:1.0: 2 ports detected
[ 5.859364] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 5.859431] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 5.859434] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 5.859492] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 5.859589] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000fb00
[ 5.859670] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.859727] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.859805] usb usb5: Product: UHCI Host Controller
[ 5.859859] usb usb5: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 5.859916] usb usb5: SerialNumber: 0000:00:1a.2
[ 5.860055] usb usb5: configuration #1 chosen from 1 choice
[ 5.860161] hub 5-0:1.0: USB hub found
[ 5.860216] hub 5-0:1.0: 2 ports detected
[ 5.860308] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 5.860371] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 5.860374] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 5.860430] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 5.860544] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fa00
[ 5.860628] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.860686] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.860763] usb usb6: Product: UHCI Host Controller
[ 5.860816] usb usb6: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 5.860871] usb usb6: SerialNumber: 0000:00:1d.0
[ 5.861010] usb usb6: configuration #1 chosen from 1 choice
[ 5.861111] hub 6-0:1.0: USB hub found
[ 5.861163] hub 6-0:1.0: 2 ports detected
[ 5.861249] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 5.861308] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 5.861311] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 5.861369] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 5.861465] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000f900
[ 5.861541] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.861598] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.861674] usb usb7: Product: UHCI Host Controller
[ 5.861723] usb usb7: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 5.861781] usb usb7: SerialNumber: 0000:00:1d.1
[ 5.861882] usb usb7: configuration #1 chosen from 1 choice
[ 5.861956] hub 7-0:1.0: USB hub found
[ 5.862007] hub 7-0:1.0: 2 ports detected
[ 5.862091] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 5.862149] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 5.862151] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 5.862206] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 5.863017] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f800
[ 5.863091] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.863145] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.863216] usb usb8: Product: UHCI Host Controller
[ 5.863265] usb usb8: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 5.863316] usb usb8: SerialNumber: 0000:00:1d.2
[ 5.863409] usb usb8: configuration #1 chosen from 1 choice
[ 5.863518] hub 8-0:1.0: USB hub found
[ 5.863575] hub 8-0:1.0: 2 ports detected
[ 5.995963] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.996057] i915 0000:00:02.0: setting latency timer to 64
[ 6.000526] mtrr: no more MTRRs available
[ 6.000582] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 6.002124] i915 0000:00:02.0: irq 26 for MSI/MSI-X
[ 6.002131] [drm] set up 7M of stolen space
[ 6.003346] [drm] initialized overlay support
[ 6.032636] firewire_core: created device fw0: GUID 00004c0100003eeb, S400
[ 6.168575] usb 4-1: new low speed USB device using uhci_hcd and address 2
[ 6.221490] Console: switching to colour frame buffer device 240x67
[ 6.230046] fb0: inteldrmfb frame buffer device
[ 6.230076] registered panic notifier
[ 6.230135] No ACPI video bus found
[ 6.230195] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 6.240235] Linux video capture interface: v2.00
[ 6.343761] usb 4-1: New USB device found, idVendor=413c, idProduct=3012
[ 6.343854] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 6.343921] usb 4-1: Product: Dell USB Optical Mouse
[ 6.343955] usb 4-1: Manufacturer: Dell
[ 6.344050] usb 4-1: configuration #1 chosen from 1 choice
[ 6.355023] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 6.355114] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 6.378553] cx18: Start initialization, version 1.2.0
[ 6.378620] cx18-0: Initializing card 0
[ 6.378647] cx18-0: Autodetected Hauppauge card
[ 6.378752] cx18 0000:02:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6.378805] cx18-0: Unreasonably low latency timer, setting to 64 (was 2)
[ 6.380712] cx18-0: cx23418 revision 01010000 (B)
[ 6.456517] usb 4-2: new full speed USB device using uhci_hcd and address 3
[ 6.509938] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input3
[ 6.563058] usbcore: registered new interface driver hiddev
[ 6.575952] input: Dell Dell USB Optical Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input4
[ 6.576104] generic-usb 0003:413C:3012.0001: input,hidraw0: USB HID v1.11 Mouse [Dell Dell USB Optical Mouse] on usb-0000:00:1a.1-1/input0
[ 6.576207] usbcore: registered new interface driver usbhid
[ 6.576245] usbhid: v2.6:USB HID core driver
[ 6.598824] tveeprom 2-0050: Hauppauge model 74541, rev C6B6, serial# 5210386
[ 6.598878] tveeprom 2-0050: MAC address is 00-0D-FE-4F-81-12
[ 6.598917] tveeprom 2-0050: tuner model is Philips FM1236 MK5 (idx 116, type 43)
[ 6.598965] tveeprom 2-0050: TV standards NTSC(M) (eeprom 0x08)
[ 6.599004] tveeprom 2-0050: audio processor is CX23418 (idx 38)
[ 6.599045] tveeprom 2-0050: decoder processor is CX23418 (idx 31)
[ 6.599086] tveeprom 2-0050: has radio
[ 6.599114] cx18-0: Autodetected Hauppauge HVR-1600
[ 6.599147] cx18-0: Simultaneous Digital and Analog TV capture supported
[ 6.626733] usb 4-2: New USB device found, idVendor=1784, idProduct=0001
[ 6.626828] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6.626895] usb 4-2: Product: eHome Infrared Transceiver
[ 6.626932] usb 4-2: Manufacturer: Topseed
[ 6.626961] usb 4-2: SerialNumber: TS000t3t
[ 6.627071] usb 4-2: configuration #1 chosen from 1 choice
[ 6.697442] IRQ 16/cx18-0: IRQF_DISABLED is not guaranteed on shared IRQs
[ 6.740400] lirc_dev: IR Remote Control driver registered, major 61
[ 6.740679] usb 5-1: new low speed USB device using uhci_hcd and address 2
[ 6.745727] lirc_mceusb: Windows Media Center Edition USB IR Transceiver driver for LIRC 1.90
[ 6.747448] lirc_mceusb: Daniel Melander <lirc@rajidae.se>, Martin Blatter <martin_a_blatter@yahoo.com>, Dan Conti <dconti@acm.wwu.edu>
[ 6.931591] usb 5-1: New USB device found, idVendor=045e, idProduct=00b4
[ 6.933508] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 6.935371] usb 5-1: Product: Microsoft® Digital Media Keyboard
[ 6.937268] usb 5-1: Manufacturer: Microsoft
[ 6.939254] usb 5-1: configuration #1 chosen from 1 choice
[ 6.961899] input: Microsoft Microsoft® Digital Media Keyboard as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input5
[ 6.964048] generic-usb 0003:045E:00B4.0002: input,hidraw1: USB HID v1.11 Keyboard [Microsoft Microsoft® Digital Media Keyboard ] on usb-0000:00:1a.2-1/input0
[ 6.993763] input: Microsoft Microsoft® Digital Media Keyboard as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.1/input/input6
[ 6.996115] generic-usb 0003:045E:00B4.0003: input,hidraw2: USB HID v1.11 Device [Microsoft Microsoft® Digital Media Keyboard ] on usb-0000:00:1a.2-1/input1
[ 7.000536] usb 4-2: reset full speed USB device using uhci_hcd and address 3
[ 7.154695] lirc_dev: lirc_register_driver: sample_rate: 0
[ 7.161686] lirc_mceusb[3]: Topseed eHome Infrared Transceiver on usb4:3
[ 7.164201] usbcore: registered new interface driver lirc_mceusb
[ 7.184148] tuner 3-0043: chip found @ 0x86 (cx18 i2c driver #0-1)
[ 7.213100] tda9887 3-0043: creating new instance
[ 7.215593] tda9887 3-0043: tda988[5/6/7] found
[ 7.220228] tuner 3-0061: chip found @ 0xc2 (cx18 i2c driver #0-1)
[ 7.229158] cs5345 2-004c: chip found @ 0x98 (cx18 i2c driver #0-0)
[ 7.247163] tuner-simple 3-0061: creating new instance
[ 7.249798] tuner-simple 3-0061: type set to 43 (Philips NTSC MK3 (FM1236MK3 or FM1236/F))
[ 7.254454] cx18-0: Registered device video0 for encoder MPEG (64 x 32 kB)
[ 7.257121] DVB: registering new adapter (cx18)
[ 7.308510] usb 5-2: new low speed USB device using uhci_hcd and address 3
[ 7.315398] MXL5005S: Attached at address 0x63
[ 7.318094] DVB: registering adapter 0 frontend 0 (Samsung S5H1409 QAM/8VSB Frontend)...
[ 7.320872] cx18-0: DVB Frontend registered
[ 7.323575] cx18-0: Registered DVB adapter0 for TS (32 x 32 kB)
[ 7.326313] cx18-0: Registered device video32 for encoder YUV (16 x 128 kB)
[ 7.329039] cx18-0: Registered device vbi0 for encoder VBI (20 x 51984 bytes)
[ 7.331758] cx18-0: Registered device video24 for encoder PCM audio (256 x 4 kB)
[ 7.334482] cx18-0: Registered device radio0 for encoder radio
[ 7.337171] cx18-0: Initialized card: Hauppauge HVR-1600
[ 7.339881] cx18: End initialization
[ 7.360036] cx18 0000:02:01.0: firmware: requesting v4l-cx23418-cpu.fw
[ 7.483544] usb 5-2: New USB device found, idVendor=0764, idProduct=0501
[ 7.486272] usb 5-2: New USB device strings: Mfr=3, Product=1, SerialNumber=0
[ 7.489003] usb 5-2: Product: UPS AE550
[ 7.491693] usb 5-2: Manufacturer: CPS
[ 7.494855] usb 5-2: configuration #1 chosen from 1 choice
[ 7.534116] cx18-0: loaded v4l-cx23418-cpu.fw firmware (158332 bytes)
[ 7.562177] cx18 0000:02:01.0: firmware: requesting v4l-cx23418-apu.fw
[ 7.641606] generic-usb 0003:0764:0501.0004: hiddev0,hidraw3: USB HID v1.10 Device [CPS UPS AE550] on usb-0000:00:1a.2-2/input0
[ 7.683756] cx18-0: loaded v4l-cx23418-apu.fw firmware V00120000 (141200 bytes)
[ 7.692828] cx18-0: FW version: 0.0.74.0 (Release 2007/03/12)
[ 7.900552] cx18 0000:02:01.0: firmware: requesting v4l-cx23418-cpu.fw
[ 8.041046] cx18 0000:02:01.0: firmware: requesting v4l-cx23418-apu.fw
[ 8.353690] cx18 0000:02:01.0: firmware: requesting v4l-cx23418-dig.fw
[ 8.543612] cx18-0 843: loaded v4l-cx23418-dig.fw firmware (16382 bytes)
[ 8.565914] cx18-0 843: verified load of v4l-cx23418-dig.fw firmware (16382 bytes)
[ 9.709345] EXT3 FS on dm-0, internal journal
[ 9.924423] loop: module loaded
[ 9.954442] fuse init (API version 7.13)
[ 10.755182] Adding 122872k swap on /dev/mapper/tetrahelix-swap. Priority:-1 extents:1 across:122872k
[ 10.758886] Adding 131064k swap on /dev/mapper/tetrahelix_storage-swap. Priority:-2 extents:1 across:131064k
[ 12.045588] kjournald starting. Commit interval 5 seconds
[ 12.045791] EXT3 FS on sdb1, internal journal
[ 12.045795] EXT3-fs: mounted filesystem with ordered data mode.
[ 12.105921] kjournald starting. Commit interval 5 seconds
[ 12.106221] EXT3 FS on dm-4, internal journal
[ 12.106224] EXT3-fs: mounted filesystem with ordered data mode.
[ 12.206977] kjournald starting. Commit interval 5 seconds
[ 12.207232] EXT3 FS on dm-3, internal journal
[ 12.207236] EXT3-fs: mounted filesystem with ordered data mode.
[ 12.249818] kjournald starting. Commit interval 5 seconds
[ 12.250128] EXT3 FS on dm-6, internal journal
[ 12.250130] EXT3-fs: mounted filesystem with ordered data mode.
[ 13.132225] e1000e 0000:00:19.0: irq 25 for MSI/MSI-X
[ 13.184075] e1000e 0000:00:19.0: irq 25 for MSI/MSI-X
[ 13.184306] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 17.932766] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[ 17.935064] 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[ 17.937503] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 18.682045] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 18.700120] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 18.700320] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[ 18.700322] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
[ 18.700324] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 25.512566] warning: `ntpd' uses 32-bit capabilities (legacy support in use)
[ 26.542240] lp: driver loaded but no devices found
[ 26.645880] ppdev: user-space parallel port driver
[ 28.452504] eth0: no IPv6 routers present
[ 2439.006104] lo: Disabled Privacy Extensions
Reply to: