boot-floppies 3.0.7 / idepci / network install
Ok. Let's go.
First I got kernel errors about my floppy drive (before insering root
floppy). See at the end of this message for the log.
First error:
the french with euro map doesn't worked (not a valid map).
Second error:
I have a 3c515 isa card. I got some problems to get it recognized. I needed
to pnpdump / isapnp it. Before I tried to configure it via the menu and I
discovered a error :
if I set a io=0x300 one time, the second try, even if I deleted it,
modprobe kept the option (it was written in /etc/modules.conf).
Third error:
dhcp is by default, maybe it doesn't need (I did several times the mistake
by pressing [enter] too fast.) I don't have a dhcp server, but dhcp said it
was successfully configured. And during the rest of the installation, I got
a lot of DHCPDISCOVER in the logs.
Fourth error:
I used a proxy for the ftp installation. It failed because of my mistake
but :
the URL setting was not kept.
BTW, I can't use a proxy with authentification.
That's all.
kernel log:
floppy0: Getstatus times out (0) on fdc 0
floppy driver state
-------------------
now=521 last interrupt=521 diff=0 last called handler=00000000
timeout_message=do wakeup
last output bytes:
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
8 80 515
8 80 515
8 80 515
8 80 515
e 80 515
8 80 516
8 80 516
8 80 516
8 80 516
last result at 516
last redo_fd_request at 517
status=0
fdc_busy=0
cont=00000000
CURRENT=00000000
command_status=-1
floppy0: get result error. Fdc=0 Last status=ffffffff Read bytes=0
floppy driver state
-------------------
now=521 last interrupt=521 diff=0 last called handler=00000000
timeout_message=do wakeup
last output bytes:
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
8 80 515
8 80 515
8 80 515
8 80 515
e 80 515
8 80 516
8 80 516
8 80 516
8 80 516
last result at 516
last redo_fd_request at 517
status=0
fdc_busy=0
cont=00000000
CURRENT=00000000
command_status=-1
floppy0: unexpected interrupt
VFS: Insert root floppy disk to be loaded into RAM disk and press ENTER
floppy0: unexpected interrupt
floppy0: sensei repl[0]=c0 repl[1]=0
floppy0: sensei repl[0]=c1 repl[1]=0
floppy0: sensei repl[0]=c2 repl[1]=0
floppy0: sensei repl[0]=c3 repl[1]=0
VFS: Disk change detected on device fd(2,0)
--
Thomas Poindessous
EpX asso GNU/Linux de l'Epita
epx@epita.fr && http://www.epita.fr/~epx
Reply to: