Re: Debian and Adaptec 294x
HI.
In article <[🔎] 19990713063440.A26269@efis.ucr.ac.cr>
"Marcelo E. Magallon" <mmagallo@efis.ucr.ac.cr> writes:
> On Sat, Jul 10, 1999 at 02:17:10PM -0400, Adam Di Carlo wrote:
> >
> > The last news I saw was that Karl H. had worked out a new kernel image
> > and rescue image at
> >
> > ftp://kalle.csb.ki.se/pub/vmlinuz-2.0.36-only-aic7xxx
> > ftp://kalle.csb.ki.se/pub/resc1440.bin-only-aic7xxx
> >
> > Can this group give me solid confirmation that these are still there,
> > and work well, that is, solve a significant percentage of problems
> > that people have with the current boot disks.
>
> I've just got positive confirmation this disk works with an Adaptec 2940
> controller that failed to work with the current slink disks.
I ask my friend to test this image. His system can not boot up
with current boot disk.
The result is OK, that he told me.
Used boot disk: resc1440.bin-only-aic7xxx
His system: Gateway G6-266 Pentium II 266MHz (ChipSet 440FX)
with 64MB memory
SCSI controler: AHA-2940UW (Gateway Edition, AIC-78xx SCSI Protocol Chip)
# he said that he does not know what "xx" means in AIC-78xx.
With current boot disk, the boot up process hangs up at the message
(scsi0) Downloading sequencer code... 419 instructions downloaded
With bin-only-aic7xxx the boot up process continues and detects
the AHA-294x at the next of the above line (he checked it by dmesg),
and the detected messages for CD-R, MO (Magneto Optical), HDD are
all correct.
--
Taketoshi Sano: <kgh12351@nifty.ne.jp>
--
To UNSUBSCRIBE, email to debian-testing-request@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Reply to: