Re: How to setup standalone wanna-build server
Sorry, I mistake. I resend message to other member.
2009/5/11 Aurelien Jarno <firstname.lastname@example.org>:
> On Mon, May 11, 2009 at 05:09:07PM +0900, Nobuhiro Iwamatsu wrote:
>> Hi, Aurelien.
>> 2009/5/11 Aurelien Jarno <email@example.com>:
>> > Hi all,
>> > On Mon, May 11, 2009 at 07:35:27AM +0200, Luk Claes wrote:
>> >> Nobuhiro Iwamatsu wrote:
>> >> > Hi, all.
>> >> Hi
>> >> > I am building debian autobuild-network by a local network to support
>> >> > new architecture (SH4).
>> >> > I worked buildd and wanna-build in one of them before.
>> >> > Because I was able to obtain several SH4 boards, I want to increase buidd node.
>> >> > I think that I want to do my image as follows.
>> >> >
>> >> > buildd-node(sh4) <---- >|
>> >> > |
>> >> > buildd-node(sh4) <----->| <------> wanna-build & data-base & quinn-diff (amd64)
>> >> > |
>> >> > buildd-node(sh4) <------ |
>> >> >
>> >> > I was able to look for some documents, but was not able to
>> >> > find a method to operate wanna-build
>> >> > with another machine.
>> >> > Would you teach a setting method or setting document?
>> >> Is there any particular reason why you want to do it yourself instead of
>> >> working together with debian-ports.org ?
>> >> I'm putting the contact address for debian-ports.org in Cc and I hope
>> >> you can work something out together.
>> > As explained on the website, debian-ports.org can provide you:
>> > - a repository to host packages and CD images
>> > - a wanna-build database
>> > - a web interface to the build logs
>> > - a DNS hosting service
>> > - a POP server for build daemons behind NAT
>> > And you can choose to use only part of that, for example only the
>> > wanna-build database. The machine has an IPv6 connection, which is
>> > useful for build daemons behind a DSL line.
>> OK, we want to use
>> - a repository to host packages and CD images
>> - a wanna-build database
>> - a web interface to the build logs
>> We want to use it as follows if we are necessary.
>> - a DNS hosting service
>> - a POP server for build daemons behind NAT
>> > People working on the ports (even if not Debian Developers) can have an
>> > account on the machine, to manage the wanna-build database, or have a
>> > web page and a git repository related to the port. For the upload rights
>> > we prefer to allow it only for Debian Developers, as it is something
>> > necessary when the packages are then moved to the official debian.org
>> > archive, but the final decision is left to the porters.
>> I understood these.
>> Could we use debian-ports.org?
>> Please teach the next step that I should take.
> This is indeed a multiple steps process.
> First of all, could you tell me if you already have packages to be
I dont have these. I built base system from www.si-linux.org/pub/debian-sh/.
This repository has etch package.
I want to use it if you have an image of sh4.debian.net.
I have a mirror of sh4.debian.net, but contents are incomplete.
> Do you already have some build daemons?
I already have 5 buildd machine.
I set up only one of them.
Because four of them of the next do not have a hard disk, I wait. I
can set it up entirely in next week.
> Then could you give me a:
> - a list of accounts to be created on the machine, with the associated
> SSH keys. This is needed to control the wanna-build database.
OK. If I finish setup buildd, I will send these.
> - a list of GPG keys allowed to upload packages (you don't need an
> account for that).
Sorry, please teach me.
Is this GPG key a thing to make on buildd?
I cannot understand how I use this GPG key.
> I'll create the SH4 archive and the corresponding wanna-build setup
> later today.