Bug#932089: openssh-server: Cannot log into openssh-server on buster/mipsel
Package: openssh-server
Version: 1:7.9p1-10
Severity: important
In a fairly minimal buster installation on mipsel, I am unable to log into
openssh-server from a Debian unstable client.
Here's the debug log when I start sshd manually:
$ systemctl stop sshd
$ mkdir /run/sshd
$ /usr/sbin/sshd -ddd
debug2: load_server_config: filename /etc/ssh/sshd_config
debug2: load_server_config: done config len = 262
debug2: parse_server_config: config /etc/ssh/sshd_config len 262
debug3: /etc/ssh/sshd_config:32 setting PermitRootLogin yes
debug3: /etc/ssh/sshd_config:56 setting PasswordAuthentication yes
debug3: /etc/ssh/sshd_config:61 setting ChallengeResponseAuthentication no
debug3: /etc/ssh/sshd_config:84 setting UsePAM yes
debug3: /etc/ssh/sshd_config:89 setting X11Forwarding yes
debug3: /etc/ssh/sshd_config:93 setting PrintMotd no
debug3: /etc/ssh/sshd_config:111 setting AcceptEnv LANG LC_* TZ
debug1: sshd version OpenSSH_7.9, OpenSSL 1.1.1c 28 May 2019
debug1: private host key #0: ssh-rsa SHA256:x
debug1: private host key #1: ecdsa-sha2-nistp256 SHA256:x
debug1: private host key #2: ssh-ed25519 SHA256:x
debug1: rexec_argv[0]='/usr/sbin/sshd'
debug1: rexec_argv[1]='-ddd'
debug3: oom_adjust_setup
debug1: Set /proc/self/oom_score_adj from 0 to -1000
debug2: fd 3 setting O_NONBLOCK
debug1: Bind to port 22 on 0.0.0.0.
Server listening on 0.0.0.0 port 22.
debug2: fd 4 setting O_NONBLOCK
debug3: sock_set_v6only: set socket 4 IPV6_V6ONLY
debug1: Bind to port 22 on ::.
Server listening on :: port 22.
debug3: fd 5 is not O_NONBLOCK
debug1: Server will not fork when running in debugging mode.
debug3: send_rexec_state: entering fd = 8 config len 262
debug3: ssh_msg_send: type 0
debug3: send_rexec_state: done
debug1: rexec start in 5 out 5 newsock 5 pipe -1 sock 8
debug1: inetd sockets after dupping: 3, 3
Connection from 192.168.1.5 port 44740 on 192.168.1.172 port 22
debug1: Client protocol version 2.0; client software version OpenSSH_8.0p1 Debian-3
debug1: match: OpenSSH_8.0p1 Debian-3 pat OpenSSH* compat 0x04000000
debug1: Local version string SSH-2.0-OpenSSH_7.9p1 Debian-10
debug2: fd 3 setting O_NONBLOCK
debug3: ssh_sandbox_init: preparing seccomp filter sandbox
debug2: Network child is on pid 6055
debug3: preauth child monitor started
debug3: privsep user:group 104:65534 [preauth]
debug1: permanently_set_uid: 104/65534 [preauth]
debug3: ssh_sandbox_child: setting PR_SET_NO_NEW_PRIVS [preauth]
debug3: ssh_sandbox_child: attaching seccomp filter program [preauth]
debug1: ssh_sandbox_child: prctl(PR_SET_SECCOMP): Invalid argument [preauth]
debug1: list_hostkey_types: rsa-sha2-512,rsa-sha2-256,ssh-rsa,ecdsa-sha2-nistp256,ssh-ed25519 [preauth]
debug3: send packet: type 20 [preauth]
debug1: SSH2_MSG_KEXINIT sent [preauth]
debug3: receive packet: type 20 [preauth]
debug1: SSH2_MSG_KEXINIT received [preauth]
debug2: local server KEXINIT proposal [preauth]
debug2: KEX algorithms: curve25519-sha256,curve25519-sha256@libssh.org,ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-shh
a256,diffie-hellman-group16-sha512,diffie-hellman-group18-sha512,diffie-hellman-group14-sha256,diffie-hellman-group14-sha1 [preauth]
debug2: host key algorithms: rsa-sha2-512,rsa-sha2-256,ssh-rsa,ecdsa-sha2-nistp256,ssh-ed25519 [preauth]
debug2: ciphers ctos: chacha20-poly1305@openssh.com,aes128-ctr,aes192-ctr,aes256-ctr,aes128-gcm@openssh.com,aes256-gcm@openssh.com [preauth]
debug2: ciphers stoc: chacha20-poly1305@openssh.com,aes128-ctr,aes192-ctr,aes256-ctr,aes128-gcm@openssh.com,aes256-gcm@openssh.com [preauth]
debug2: MACs ctos: umac-64-etm@openssh.com,umac-128-etm@openssh.com,hmac-sha2-256-etm@openssh.com,hmac-sha2-512-etm@openssh.com,hmac-sha1-etm@openssh.com,umac-66
4@openssh.com,umac-128@openssh.com,hmac-sha2-256,hmac-sha2-512,hmac-sha1 [preauth]
debug2: MACs stoc: umac-64-etm@openssh.com,umac-128-etm@openssh.com,hmac-sha2-256-etm@openssh.com,hmac-sha2-512-etm@openssh.com,hmac-sha1-etm@openssh.com,umac-66
4@openssh.com,umac-128@openssh.com,hmac-sha2-256,hmac-sha2-512,hmac-sha1 [preauth]
debug2: compression ctos: none,zlib@openssh.com [preauth]
debug2: compression stoc: none,zlib@openssh.com [preauth]
debug2: languages ctos: [preauth]
debug2: languages stoc: [preauth]
debug2: first_kex_follows 0 [preauth]
debug2: reserved 0 [preauth]
debug2: peer client KEXINIT proposal [preauth]
debug2: KEX algorithms: curve25519-sha256,curve25519-sha256@libssh.org,ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-shh
a256,diffie-hellman-group16-sha512,diffie-hellman-group18-sha512,diffie-hellman-group14-sha256,diffie-hellman-group14-sha1,ext-info-c [preauth]
debug2: host key algorithms: ssh-ed25519-cert-v01@openssh.com,ssh-ed25519,ecdsa-sha2-nistp256-cert-v01@openssh.com,ecdsa-sha2-nistp384-cert-v01@openssh.com,ecdss
a-sha2-nistp521-cert-v01@openssh.com,rsa-sha2-512-cert-v01@openssh.com,rsa-sha2-256-cert-v01@openssh.com,ssh-rsa-cert-v01@openssh.com,ecdsa-sha2-nistp256,ecdsa--
sha2-nistp384,ecdsa-sha2-nistp521,rsa-sha2-512,rsa-sha2-256,ssh-rsa [preauth]
debug2: ciphers ctos: chacha20-poly1305@openssh.com,aes128-ctr,aes192-ctr,aes256-ctr,aes128-gcm@openssh.com,aes256-gcm@openssh.com [preauth]
debug2: ciphers stoc: chacha20-poly1305@openssh.com,aes128-ctr,aes192-ctr,aes256-ctr,aes128-gcm@openssh.com,aes256-gcm@openssh.com [preauth]
debug2: MACs ctos: umac-64-etm@openssh.com,umac-128-etm@openssh.com,hmac-sha2-256-etm@openssh.com,hmac-sha2-512-etm@openssh.com,hmac-sha1-etm@openssh.com,umac-66
4@openssh.com,umac-128@openssh.com,hmac-sha2-256,hmac-sha2-512,hmac-sha1 [preauth]
debug2: MACs stoc: umac-64-etm@openssh.com,umac-128-etm@openssh.com,hmac-sha2-256-etm@openssh.com,hmac-sha2-512-etm@openssh.com,hmac-sha1-etm@openssh.com,umac-66
4@openssh.com,umac-128@openssh.com,hmac-sha2-256,hmac-sha2-512,hmac-sha1 [preauth]
debug2: compression ctos: none,zlib@openssh.com,zlib [preauth]
debug2: compression stoc: none,zlib@openssh.com,zlib [preauth]
debug2: languages ctos: [preauth]
debug2: languages stoc: [preauth]
debug2: first_kex_follows 0 [preauth]
debug2: reserved 0 [preauth]
debug1: kex: algorithm: curve25519-sha256 [preauth]
debug1: kex: host key algorithm: ssh-ed25519 [preauth]
debug1: kex: client->server cipher: chacha20-poly1305@openssh.com MAC: <implicit> compression: none [preauth]
debug1: kex: server->client cipher: chacha20-poly1305@openssh.com MAC: <implicit> compression: none [preauth]
debug1: expecting SSH2_MSG_KEX_ECDH_INIT [preauth]
debug3: receive packet: type 30 [preauth]
debug3: mm_sshkey_sign entering [preauth]
debug3: mm_request_send entering: type 6 [preauth]
debug3: mm_sshkey_sign: waiting for MONITOR_ANS_SIGN [preauth]
debug3: mm_request_receive_expect entering: type 7 [preauth]
debug3: mm_request_receive entering [preauth]
debug3: mm_request_receive entering
debug3: monitor_read: checking request 6
debug3: mm_answer_sign
debug3: mm_answer_sign: hostkey proof signature 0x55c44540(83)
debug3: mm_request_send entering: type 7
debug2: monitor_read: 6 used once, disabling now
debug3: send packet: type 31 [preauth]
debug3: send packet: type 21 [preauth]
debug2: set_newkeys: mode 1 [preauth]
debug1: rekey after 134217728 blocks [preauth]
debug1: SSH2_MSG_NEWKEYS sent [preauth]
debug1: expecting SSH2_MSG_NEWKEYS [preauth]
debug3: send packet: type 7 [preauth]
debug3: receive packet: type 21 [preauth]
debug1: SSH2_MSG_NEWKEYS received [preauth]
debug2: set_newkeys: mode 0 [preauth]
debug1: rekey after 134217728 blocks [preauth]
debug1: KEX done [preauth]
debug3: receive packet: type 5 [preauth]
debug3: send packet: type 6 [preauth]
debug3: receive packet: type 50 [preauth]
debug1: userauth-request for user root service ssh-connection method none [preauth]
debug1: attempt 0 failures 0 [preauth]
debug3: mm_getpwnamallow entering [preauth]
debug3: mm_request_send entering: type 8 [preauth]
debug3: mm_getpwnamallow: waiting for MONITOR_ANS_PWNAM [preauth]
debug3: mm_request_receive_expect entering: type 9 [preauth]
debug3: mm_request_receive entering [preauth]
debug3: mm_request_receive entering
debug3: monitor_read: checking request 8
debug3: mm_answer_pwnamallow
debug2: parse_server_config: config reprocess config len 262
debug3: mm_answer_pwnamallow: sending MONITOR_ANS_PWNAM: 1
debug3: mm_request_send entering: type 9
debug2: monitor_read: 8 used once, disabling now
debug2: input_userauth_request: setting up authctxt for root [preauth]
debug3: mm_start_pam entering [preauth]
debug3: mm_request_send entering: type 100 [preauth]
debug3: mm_inform_authserv entering [preauth]
debug3: mm_request_send entering: type 4 [preauth]
debug2: input_userauth_request: try method none [preauth]
debug3: mm_request_receive entering
debug3: monitor_read: checking request 100
debug1: PAM: initializing for "root"
debug1: PAM: setting PAM_RHOST to "192.168.1.5"
debug1: PAM: setting PAM_TTY to "ssh"
debug2: monitor_read: 100 used once, disabling now
debug3: user_specific_delay: user specific delay 0.000ms [preauth]
debug3: ensure_minimum_time_since: elapsed 7.724ms, delaying 2.422ms (requested 5.073ms) [preauth]
debug3: userauth_finish: failure partial=0 next methods="publickey,password" [preauth]
debug3: send packet: type 51 [preauth]
debug3: receive packet: type 50 [preauth]
debug1: userauth-request for user root service ssh-connection method publickey [preauth]
debug1: attempt 1 failures 0 [preauth]
debug2: input_userauth_request: try method publickey [preauth]
debug1: userauth_pubkey: test pkalg ssh-ed25519 pkblob ED25519 SHA256:x [preauth]
debug3: mm_key_allowed entering [preauth]
debug3: mm_request_send entering: type 22 [preauth]
debug3: mm_key_allowed: waiting for MONITOR_ANS_KEYALLOWED [preauth]
debug3: mm_request_receive_expect entering: type 23 [preauth]
debug3: mm_request_receive entering [preauth]
debug3: mm_request_receive entering
debug3: monitor_read: checking request 4
debug3: mm_answer_authserv: service=ssh-connection, style=, role=
debug2: monitor_read: 4 used once, disabling now
debug3: mm_request_receive entering
debug3: monitor_read: checking request 22
debug3: mm_answer_keyallowed entering
debug3: mm_answer_keyallowed: key_from_blob: 0x55c59e70
debug1: temporarily_use_uid: 0/0 (e=0/0)
debug1: trying public key file /root/.ssh/authorized_keys
debug1: fd 4 clearing O_NONBLOCK
debug1: /root/.ssh/authorized_keys:1: matching key found: ED25519 SHA256:x
debug1: /root/.ssh/authorized_keys:1: key options: agent-forwarding port-forwarding pty user-rc x11-forwarding
Accepted key ED25519 SHA256:x found at /root/.ssh/authorized_keys:1
debug1: restore_uid: 0/0
debug3: mm_answer_keyallowed: publickey authentication test: ED25519 key is allowed
debug3: mm_request_send entering: type 23
debug3: send packet: type 60 [preauth]
debug2: userauth_pubkey: authenticated 0 pkalg ssh-ed25519 [preauth]
debug3: user_specific_delay: user specific delay 0.000ms [preauth]
debug1: monitor_read_log: child log fd closed
debug3: mm_request_receive entering
debug1: do_cleanup
debug1: PAM: cleanup
debug3: PAM: sshpam_thread_cleanup entering
debug1: Killing privsep child 6055
debug1: audit_event: unhandled event 12
and here's the log on the client side up to the point where sshd exits:
$ ssh -vvvvvvv root@192.168.1.172
OpenSSH_8.0p1 Debian-3, OpenSSL 1.1.1c 28 May 2019
debug1: Reading configuration data /home/francois/.ssh/config
debug3: kex names ok: [curve25519-sha256@libssh.org,ecdh-sha2-nistp521,ecdh-sha2-nistp256,ecdh-sha2-nistp384,diffie-hellman-group-exchange-sha256,diffie-hellman-group1-sha1]
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: /etc/ssh/ssh_config line 19: Applying options for *
debug2: resolve_canonicalize: hostname 192.168.1.172 is address
debug2: ssh_connect_direct
debug1: Connecting to 192.168.1.172 [192.168.1.172] port 22.
debug1: Connection established.
debug1: identity file /home/francois/.ssh/id_rsa type -1
debug1: identity file /home/francois/.ssh/id_rsa-cert type -1
debug1: identity file /home/francois/.ssh/id_dsa type -1
debug1: identity file /home/francois/.ssh/id_dsa-cert type -1
debug1: identity file /home/francois/.ssh/id_ecdsa type -1
debug1: identity file /home/francois/.ssh/id_ecdsa-cert type -1
debug1: identity file /home/francois/.ssh/id_ed25519 type -1
debug1: identity file /home/francois/.ssh/id_ed25519-cert type -1
debug1: identity file /home/francois/.ssh/id_xmss type -1
debug1: identity file /home/francois/.ssh/id_xmss-cert type -1
debug1: Local version string SSH-2.0-OpenSSH_8.0p1 Debian-3
debug1: Remote protocol version 2.0, remote software version OpenSSH_7.9p1 Debian-10
debug1: match: OpenSSH_7.9p1 Debian-10 pat OpenSSH* compat 0x04000000
debug2: fd 3 setting O_NONBLOCK
debug1: Authenticating to 192.168.1.172:22 as 'root'
debug3: hostkeys_foreach: reading file "/home/francois/.ssh/known_hosts"
debug3: record_hostkey: found key type ED25519 in file /home/francois/.ssh/known_hosts:309
debug3: load_hostkeys: loaded 1 keys from 192.168.1.172
debug3: order_hostkeyalgs: prefer hostkeyalgs: ssh-ed25519-cert-v01@openssh.com,ssh-ed25519
debug3: send packet: type 20
debug1: SSH2_MSG_KEXINIT sent
debug3: receive packet: type 20
debug1: SSH2_MSG_KEXINIT received
debug2: local client KEXINIT proposal
debug2: KEX algorithms: curve25519-sha256,curve25519-sha256@libssh.org,ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group16-sha512,diffie-hellman-group18-sha512,diffie-hellman-group14-sha256,diffie-hellman-group14-sha1,ext-info-c
debug2: host key algorithms: ssh-ed25519-cert-v01@openssh.com,ssh-ed25519,ecdsa-sha2-nistp256-cert-v01@openssh.com,ecdsa-sha2-nistp384-cert-v01@openssh.com,ecdsa-sha2-nistp521-cert-v01@openssh.com,rsa-sha2-512-cert-v01@openssh.com,rsa-sha2-256-cert-v01@openssh.com,ssh-rsa-cert-v01@openssh.com,ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,rsa-sha2-512,rsa-sha2-256,ssh-rsa
debug2: ciphers ctos: chacha20-poly1305@openssh.com,aes128-ctr,aes192-ctr,aes256-ctr,aes128-gcm@openssh.com,aes256-gcm@openssh.com
debug2: ciphers stoc: chacha20-poly1305@openssh.com,aes128-ctr,aes192-ctr,aes256-ctr,aes128-gcm@openssh.com,aes256-gcm@openssh.com
debug2: MACs ctos: umac-64-etm@openssh.com,umac-128-etm@openssh.com,hmac-sha2-256-etm@openssh.com,hmac-sha2-512-etm@openssh.com,hmac-sha1-etm@openssh.com,umac-64@openssh.com,umac-128@openssh.com,hmac-sha2-256,hmac-sha2-512,hmac-sha1
debug2: MACs stoc: umac-64-etm@openssh.com,umac-128-etm@openssh.com,hmac-sha2-256-etm@openssh.com,hmac-sha2-512-etm@openssh.com,hmac-sha1-etm@openssh.com,umac-64@openssh.com,umac-128@openssh.com,hmac-sha2-256,hmac-sha2-512,hmac-sha1
debug2: compression ctos: none,zlib@openssh.com,zlib
debug2: compression stoc: none,zlib@openssh.com,zlib
debug2: languages ctos:
debug2: languages stoc:
debug2: first_kex_follows 0
debug2: reserved 0
debug2: peer server KEXINIT proposal
debug2: KEX algorithms: curve25519-sha256,curve25519-sha256@libssh.org,ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group16-sha512,diffie-hellman-group18-sha512,diffie-hellman-group14-sha256,diffie-hellman-group14-sha1
debug2: host key algorithms: rsa-sha2-512,rsa-sha2-256,ssh-rsa,ecdsa-sha2-nistp256,ssh-ed25519
debug2: ciphers ctos: chacha20-poly1305@openssh.com,aes128-ctr,aes192-ctr,aes256-ctr,aes128-gcm@openssh.com,aes256-gcm@openssh.com
debug2: ciphers stoc: chacha20-poly1305@openssh.com,aes128-ctr,aes192-ctr,aes256-ctr,aes128-gcm@openssh.com,aes256-gcm@openssh.com
debug2: MACs ctos: umac-64-etm@openssh.com,umac-128-etm@openssh.com,hmac-sha2-256-etm@openssh.com,hmac-sha2-512-etm@openssh.com,hmac-sha1-etm@openssh.com,umac-64@openssh.com,umac-128@openssh.com,hmac-sha2-256,hmac-sha2-512,hmac-sha1
debug2: MACs stoc: umac-64-etm@openssh.com,umac-128-etm@openssh.com,hmac-sha2-256-etm@openssh.com,hmac-sha2-512-etm@openssh.com,hmac-sha1-etm@openssh.com,umac-64@openssh.com,umac-128@openssh.com,hmac-sha2-256,hmac-sha2-512,hmac-sha1
debug2: compression ctos: none,zlib@openssh.com
debug2: compression stoc: none,zlib@openssh.com
debug2: languages ctos:
debug2: languages stoc:
debug2: first_kex_follows 0
debug2: reserved 0
debug1: kex: algorithm: curve25519-sha256
debug1: kex: host key algorithm: ssh-ed25519
debug1: kex: server->client cipher: chacha20-poly1305@openssh.com MAC: <implicit> compression: none
debug1: kex: client->server cipher: chacha20-poly1305@openssh.com MAC: <implicit> compression: none
debug3: send packet: type 30
debug1: expecting SSH2_MSG_KEX_ECDH_REPLY
debug3: receive packet: type 31
debug1: Server host key: ssh-ed25519 SHA256:x
debug3: hostkeys_foreach: reading file "/home/francois/.ssh/known_hosts"
debug3: record_hostkey: found key type ED25519 in file /home/francois/.ssh/known_hosts:309
debug3: load_hostkeys: loaded 1 keys from 192.168.1.172
debug1: Host '192.168.1.172' is known and matches the ED25519 host key.
debug1: Found key in /home/francois/.ssh/known_hosts:309
debug3: send packet: type 21
debug2: set_newkeys: mode 1
debug1: rekey out after 134217728 blocks
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug3: receive packet: type 21
debug1: SSH2_MSG_NEWKEYS received
debug2: set_newkeys: mode 0
debug1: rekey in after 134217728 blocks
debug1: Will attempt key: francois@akranes ED25519 SHA256:x
debug1: Will attempt key: francois@akranes(foss) ED25519 SHA256:x
debug1: Will attempt key: /home/francois/.ssh/id_rsa
debug1: Will attempt key: /home/francois/.ssh/id_dsa
debug1: Will attempt key: /home/francois/.ssh/id_ecdsa
debug1: Will attempt key: /home/francois/.ssh/id_ed25519
debug1: Will attempt key: /home/francois/.ssh/id_xmss
debug2: pubkey_prepare: done
debug3: send packet: type 5
debug3: receive packet: type 7
debug1: SSH2_MSG_EXT_INFO received
debug1: kex_input_ext_info: server-sig-algs=<ssh-ed25519,ssh-rsa,rsa-sha2-256,rsa-sha2-512,ssh-dss,ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521>
debug3: receive packet: type 6
debug2: service_accept: ssh-userauth
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug3: send packet: type 50
debug3: receive packet: type 51
debug1: Authentications that can continue: publickey,password
debug3: start over, passed a different list publickey,password
debug3: preferred gssapi-with-mic,publickey,keyboard-interactive,password
debug3: authmethod_lookup publickey
debug3: remaining preferred: keyboard-interactive,password
debug3: authmethod_is_enabled publickey
debug1: Next authentication method: publickey
debug1: Offering public key: francois@akranes ED25519 SHA256:x
debug3: send packet: type 50
debug2: we sent a publickey packet, wait for reply
debug3: receive packet: type 60
debug1: Server accepts key: francois@akranes ED25519 SHA256:x
debug3: sign_and_send_pubkey: ED25519 SHA256:x
debug3: sign_and_send_pubkey: signing using ssh-ed25519
Here are the things I've tried (all were unsuccesful):
1. Revert the new OpenSSL default back to pre-buster values as per
https://www.debian.org/releases/buster/amd64/release-notes/ch-information.en.html#openssl-defaults.
2. I tried logging in as a normal user instead of root.
3. Changed the permissions of .ssh to 700 and .ssh/authorized_keys to 644.
4. I installed haveged as per
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=912087#254.
5. I re-generated the host keys as per
https://www.raspberrypi.org/forums/viewtopic.php?t=168310#p1083440.
6. I explicitly disabled the sandbox using `UsePrivilegeSeparation yes` as
per https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=868009.
I have run out of ideas to debug this further but I'm happy to run whatever
test you'd like on my mipsel server.
Francois
-- System Information:
Debian Release: 10.0
APT prefers stable
APT policy: (500, 'stable')
Architecture: mipsel (mips)
Kernel: Linux 4.4.87-gnu (SMP w/4 CPU cores)
Locale: LANG=en_CA.UTF-8, LC_CTYPE=en_CA.UTF-8 (charmap=UTF-8), LANGUAGE=en_CA.UU
TF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages openssh-server depends on:
ii adduser 3.118
ii debconf [debconf-2.0] 1.5.71
ii dpkg 1.19.7
ii libaudit1 1:2.8.4-3
ii libc6 2.28-10
ii libcom-err2 1.44.5-1
ii libgssapi-krb5-2 1.17-3
ii libkrb5-3 1.17-3
ii libpam-modules 1.3.1-5
ii libpam-runtime 1.3.1-5
ii libpam0g 1.3.1-5
ii libselinux1 2.8-1+b1
ii libssl1.1 1.1.1c-1
ii libsystemd0 241-5
ii libwrap0 7.6.q-28
ii lsb-base 10.2019051400
ii openssh-client 1:7.9p1-10
ii openssh-sftp-server 1:7.9p1-10
ii procps 2:3.3.15-2
ii ucf 3.0038+nmu1
ii zlib1g 1:1.2.11.dfsg-1
Versions of packages openssh-server recommends:
ii libpam-systemd 241-5
pn ncurses-term <none>
pn xauth <none>
Versions of packages openssh-server suggests:
pn molly-guard <none>
pn monkeysphere <none>
pn rssh <none>
pn ssh-askpass <none>
pn ufw <none>
-- Configuration Files:
/etc/ssh/moduli changed [not included]
-- debconf information:
openssh-server/permit-root-login: false
openssh-server/password-authentication: false
--
https://fmarier.org/
Reply to: