openssh_8.0p1-1_source.changes ACCEPTED into experimental
Accepted:
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256
Format: 1.8
Date: Sun, 09 Jun 2019 22:47:27 +0100
Source: openssh
Architecture: source
Version: 1:8.0p1-1
Distribution: experimental
Urgency: medium
Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Changed-By: Colin Watson <cjwatson@debian.org>
Closes: 189920 374980 532754 927792
Changes:
openssh (1:8.0p1-1) experimental; urgency=medium
.
* New upstream release (https://www.openssh.com/txt/release-8.0, closes:
#927792):
- ssh(1), ssh-agent(1), ssh-add(1): Add support for ECDSA keys in
PKCS#11 tokens (LP: #1665695).
- ssh(1), sshd(8): Add experimental quantum-computing resistant key
exchange method, based on a combination of Streamlined NTRU Prime
4591^761 and X25519.
- ssh-keygen(1): Increase the default RSA key size to 3072 bits,
following NIST Special Publication 800-57's guidance for a 128-bit
equivalent symmetric security level (LP: #1445625).
- ssh(1): Allow "PKCS11Provider=none" to override later instances of the
PKCS11Provider directive in ssh_config.
- sshd(8): Add a log message for situations where a connection is
dropped for attempting to run a command but a sshd_config
ForceCommand=internal-sftp restriction is in effect.
- ssh(1): When prompting whether to record a new host key, accept the
key fingerprint as a synonym for "yes". This allows the user to paste
a fingerprint obtained out of band at the prompt and have the client
do the comparison for you.
- ssh-keygen(1): When signing multiple certificates on a single
command-line invocation, allow automatically incrementing the
certificate serial number.
- scp(1), sftp(1): Accept -J option as an alias to ProxyJump on the scp
and sftp command-lines.
- ssh-agent(1), ssh-pkcs11-helper(8), ssh-add(1): Accept "-v"
command-line flags to increase the verbosity of output; pass verbose
flags though to subprocesses, such as ssh-pkcs11-helper started from
ssh-agent.
- ssh-add(1): Add a "-T" option to allowing testing whether keys in an
agent are usable by performing a signature and a verification.
- sftp-server(8): Add a "lsetstat@openssh.com" protocol extension that
replicates the functionality of the existing SSH2_FXP_SETSTAT
operation but does not follow symlinks.
- sftp(1): Add "-h" flag to chown/chgrp/chmod commands to request they
do not follow symlinks.
- sshd(8): Expose $SSH_CONNECTION in the PAM environment. This makes
the connection 4-tuple available to PAM modules that wish to use it in
decision-making.
- sshd(8): Add a ssh_config "Match final" predicate. Matches in same
pass as "Match canonical" but doesn't require hostname
canonicalisation be enabled.
- sftp(1): Support a prefix of '@' to suppress echo of sftp batch
commands.
- ssh-keygen(1): When printing certificate contents using "ssh-keygen
-Lf /path/certificate", include the algorithm that the CA used to sign
the cert.
- sshd(8): Fix authentication failures when sshd_config contains
"AuthenticationMethods any" inside a Match block that overrides a more
restrictive default.
- sshd(8): Avoid sending duplicate keepalives when ClientAliveCount is
enabled.
- sshd(8): Fix two race conditions related to SIGHUP daemon restart.
Remnant file descriptors in recently-forked child processes could
block the parent sshd's attempt to listen(2) to the configured
addresses. Also, the restarting parent sshd could exit before any
child processes that were awaiting their re-execution state had
completed reading it, leaving them in a fallback path.
- ssh(1): Fix stdout potentially being redirected to /dev/null when
ProxyCommand=- was in use.
- sshd(8): Avoid sending SIGPIPE to child processes if they attempt to
write to stderr after their parent processes have exited.
- ssh(1): Fix bad interaction between the ssh_config ConnectTimeout and
ConnectionAttempts directives - connection attempts after the first
were ignoring the requested timeout (LP: #1798049).
- ssh-keyscan(1): Return a non-zero exit status if no keys were found
(closes: #374980, LP: #1661745).
- scp(1): Sanitize scp filenames to allow UTF-8 characters without
terminal control sequences.
- sshd(8): Fix confusion between ClientAliveInterval and time-based
RekeyLimit that could cause connections to be incorrectly closed.
- ssh(1), ssh-add(1): Correct some bugs in PKCS#11 token PIN handling at
initial token login. The attempt to read the PIN could be skipped in
some cases, particularly on devices with integrated PIN readers. This
would lead to an inability to retrieve keys from these tokens.
- ssh(1), ssh-add(1): Support keys on PKCS#11 tokens that set the
CKA_ALWAYS_AUTHENTICATE flag by requring a fresh login after the
C_SignInit operation.
- ssh(1): Improve documentation for ProxyJump/-J, clarifying that local
configuration does not apply to jump hosts.
- ssh-keygen(1): Clarify manual - ssh-keygen -e only writes public keys,
not private.
- ssh(1), sshd(8): be more strict in processing protocol banners,
allowing \r characters only immediately before \n.
- Various: fix a number of memory leaks.
- scp(1), sftp(1): fix calculation of initial bandwidth limits. Account
for bytes written before the timer starts and adjust the schedule on
which recalculations are performed. Avoids an initial burst of
traffic and yields more accurate bandwidth limits.
- sshd(8): Only consider the ext-info-c extension during the initial key
eschange. It shouldn't be sent in subsequent ones, but if it is
present we should ignore it. This prevents sshd from sending a
SSH_MSG_EXT_INFO for REKEX for these buggy clients.
- ssh-keygen(1): Clarify manual that ssh-keygen -F (find host in
authorized_keys) and -R (remove host from authorized_keys) options may
accept either a bare hostname or a [hostname]:port combo.
- ssh(1): Don't attempt to connect to empty SSH_AUTH_SOCK.
- sshd(8): Silence error messages when sshd fails to load some of the
default host keys. Failure to load an explicitly-configured hostkey
is still an error, and failure to load any host key is still fatal.
- ssh(1): Redirect stderr of ProxyCommands to /dev/null when ssh is
started with ControlPersist; prevents random ProxyCommand output from
interfering with session output.
- ssh(1): The ssh client was keeping a redundant ssh-agent socket
(leftover from authentication) around for the life of the connection.
- sshd(8): Fix bug in HostbasedAcceptedKeyTypes and
PubkeyAcceptedKeyTypes options. If only RSA-SHA2 signature types were
specified, then authentication would always fail for RSA keys as the
monitor checks only the base key (not the signature algorithm) type
against *AcceptedKeyTypes.
- ssh(1): Request correct signature types from ssh-agent when
certificate keys and RSA-SHA2 signatures are in use.
- sshd(8): Don't set $MAIL if UsePAM=yes as PAM typically specifies the
user environment if it's enabled (closes: #189920, #532754).
* Mostly resynced GSSAPI key exchange patch with Fedora. Major changes:
- Support selection of GSSAPI key exchange algorithms.
- Support GSSAPI key exchange methods with DH and SHA2.
- Support GSSAPI key exchange using ECDH and SHA2.
- Make sure the Kerberos tickets are cleaned up with the user context.
- Enable gssapi-keyex authentication without gssapi-with-mic.
- Allow querying for GSSAPI key exchange algorithms from ssh (-Q
kex-gss).
* Apply upstream patch to fix the utimensat regression tests when not
using the compatibility implementation.
Checksums-Sha1:
e4f6cdda020708a616b1f965e4960a19217ef6c3 3276 openssh_8.0p1-1.dsc
756dbb99193f9541c9206a667eaa27b0fa184a4f 1597697 openssh_8.0p1.orig.tar.gz
a287987d9d505aaa8a89e693920f14b9b9e27a5f 683 openssh_8.0p1.orig.tar.gz.asc
607d4734333121122f7a84c29e53dca22d1f4e8b 170472 openssh_8.0p1-1.debian.tar.xz
Checksums-Sha256:
d9eead44a036a84871d74a26e9f138fb60f33b74f5ba6e5e5253220ed5037e81 3276 openssh_8.0p1-1.dsc
bd943879e69498e8031eb6b7f44d08cdc37d59a7ab689aa0b437320c3481fd68 1597697 openssh_8.0p1.orig.tar.gz
1904abaa20c24f0c8fed8d7708ec13f4ddca0b8f0f3a191b183b93f142111538 683 openssh_8.0p1.orig.tar.gz.asc
82ae8aa9a3391c8fd6a40a3d1baee666e1e1b994af2b817a481e3cb821e72629 170472 openssh_8.0p1-1.debian.tar.xz
Files:
fe63553cea273fc42d92e346532f103b 3276 net standard openssh_8.0p1-1.dsc
bf050f002fe510e1daecd39044e1122d 1597697 net standard openssh_8.0p1.orig.tar.gz
d6ed552f65c74470fe03e2e25d63c363 683 net standard openssh_8.0p1.orig.tar.gz.asc
de17df8879d77cf0720314d72232e7a7 170472 net standard openssh_8.0p1-1.debian.tar.xz
-----BEGIN PGP SIGNATURE-----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=a6JZ
-----END PGP SIGNATURE-----
Thank you for your contribution to Debian.
Reply to: