Re: wireless on debian on Ultra10
I have 2 wireless usb card and are working OK...
only my wireless pci card: Ralink corp. RT2500 Wireless 802.11bg [1814:0201]
have problems
running 4.18.0-1-sparc64 now I view "wlp2s3" created but if I try to "ifup"
system crash
this is last dmesg:
# uname -a
Linux debian 4.18.0-1-sparc64 #1 Debian 4.18.6-1 (2018-09-06) sparc64
GNU/Linux
[root@debian ~]# dmesg
[ 0.000154] PROMLIB: Sun IEEE Boot Prom 'OBP 3.19.4 1999/04/28 15:05'
[ 0.000227] PROMLIB: Root node compatible:
[ 0.000525] Linux version 4.18.0-1-sparc64 (debian-kernel@lists.debian.org)
(gcc version 7.3.0 (Debian 7.3.0-29)) #1 Debian 4.18.6-1 (2018-09-06)
[ 0.035968] bootconsole [btext0] enabled
[ 0.036723] ARCH: SUN4U
[ 0.113788] Ethernet address: ff:ff:ff:ff:ff:ff
[ 0.114635] MM: PAGE_OFFSET is 0xfffff80000000000 (max_phys_bits == 40)
[ 0.115494] MM: VMALLOC [0x0000000100000000 --> 0x0000060000000000]
[ 0.116338] MM: VMEMMAP [0x0000060000000000 --> 0x00000c0000000000]
[ 0.120889] Kernel: Using 3 locked TLB entries for main kernel image.
[ 0.121838] Remapping the kernel...
[ 0.165285] done.
[ 0.391277] OF stdout device is: /pci@1f,0/pci@1,1/SUNW,m64B@2
[ 0.392105] PROM: Built device tree with 74923 bytes of memory.
[ 0.393144] Top of RAM: 0x2ff46000, Total RAM: 0x27f34000
[ 0.393953] Memory hole size: 128MB
[ 0.825664] Allocated 16384 bytes for kernel page tables.
[ 0.827137] Zone ranges:
[ 0.827833] Normal [mem 0x0000000000000000-0x000000002ff45fff]
[ 0.828683] Movable zone start for each node
[ 0.829434] Early memory node ranges
[ 0.830161] node 0: [mem 0x0000000000000000-0x0000000017ffffff]
[ 0.831006] node 0: [mem 0x0000000020000000-0x000000002fefdfff]
[ 0.831851] node 0: [mem 0x000000002ff00000-0x000000002ff2dfff]
[ 0.832697] node 0: [mem 0x000000002ff3e000-0x000000002ff45fff]
[ 0.833717] Initmem setup node 0 [mem
0x0000000000000000-0x000000002ff45fff]
[ 0.834603] On node 0 totalpages: 81818
[ 0.834618] Normal zone: 720 pages used for memmap
[ 0.834626] Normal zone: 0 pages reserved
[ 0.834638] Normal zone: 81818 pages, LIFO batch:15
[ 0.879181] Booting Linux...
[ 0.879922] CPU CAPS: [flush,stbar,swap,muldiv,v9,mul32,div32,v8plus]
[ 0.880823] CPU CAPS: [vis]
[ 0.890117] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.890130] pcpu-alloc: [0] 0
[ 0.894371] Built 1 zonelists, mobility grouping on. Total pages: 81098
[ 0.895240] Kernel command line: root=/dev/sda2 ipv6.disable=1
sunhme.macaddr=0x08,0x00,0x20,0xe5,0x01,0x30
[ 0.913421] Dentry cache hash table entries: 131072 (order: 7, 1048576
bytes)
[ 0.918352] Inode-cache hash table entries: 65536 (order: 6, 524288 bytes)
[ 0.919223] Sorting __ex_table...
[ 0.969791] Memory: 605872K/654544K available (6304K kernel code, 782K
rwdata, 1760K rodata, 480K init, 374K bss, 48672K reserved, 0K cma-reserved)
[ 0.971588] random: get_random_u64 called from
__kmem_cache_create+0x20/0x4a0 with crng_init=0
[ 0.974301] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.975768] ftrace: allocating 21953 entries in 43 pages
[ 1.095247] NR_IRQS: 2048, nr_irqs: 2048, preallocated irqs: 1
[ 1.096418] clocksource: tick: mask: 0xffffffffffffffff max_cycles:
0x4cccccd47a, max_idle_ns: 440795207438 ns
[ 1.097433] clocksource: mult[300c4ce] shift[24]
[ 1.098205] clockevent: mult[553f7cee] shift[32]
[ 1.099288] Console: colour dummy device 80x25
[ 1.100058] console [tty0] enabled
[ 1.100786] bootconsole [btext0] disabled
[ 1.179182] Calibrating delay using timer specific routine.. 668.19
BogoMIPS (lpj=1336395)
[ 1.179234] pid_max: default: 32768 minimum: 301
[ 1.180319] Security Framework initialized
[ 1.180356] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 1.180613] AppArmor: AppArmor initialized
[ 1.181200] Mount-cache hash table entries: 2048 (order: 1, 16384 bytes)
[ 1.181291] Mountpoint-cache hash table entries: 2048 (order: 1, 16384
bytes)
[ 1.189475] devtmpfs: initialized
[ 1.196193] Performance events: No support for PMU type 'ultra12'
[ 1.197257] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff,
max_idle_ns: 7645041785100000 ns
[ 1.197308] futex hash table entries: 256 (order: -1, 6144 bytes)
[ 1.199425] NET: Registered protocol family 16
[ 1.213248] audit: initializing netlink subsys (disabled)
[ 1.219225] /pci@1f,0: PCI IO [io 0x1fe02000000-0x1fe02ffffff] offset
1fe02000000
[ 1.219277] /pci@1f,0: PCI MEM [mem 0x1ff00000000-0x1ffffffffff] offset
1ff00000000
[ 1.219318] /pci@1f,0: SABRE PCI Bus Module ver[0:0]
[ 1.219344] PCI: Scanning PBM /pci@1f,0
[ 1.219510] audit: type=2000 audit(0.112:1): state=initialized
audit_enabled=0 res=1
[ 1.219969] sabre f005fa24: PCI host bridge to bus 0000:00
[ 1.220033] pci_bus 0000:00: root bus resource [io
0x1fe02000000-0x1fe02ffffff] (bus address [0x0000-0xffffff])
[ 1.220099] pci_bus 0000:00: root bus resource [mem
0x1ff00000000-0x1ffffffffff] (bus address [0x00000000-0xffffffff])
[ 1.220163] pci_bus 0000:00: root bus resource [bus 00-02]
[ 1.220286] pci 0000:00:01.1: [108e:5000] type 01 class 0x060400
[ 1.220853] pci_bus 0000:01: extended config space not accessible
[ 1.221277] pci 0000:01:01.0: [108e:1000] type 00 class 0x068000
[ 1.221806] pci 0000:01:01.1: [108e:1001] type 00 class 0x020000
[ 1.221868] pci 0000:01:01.1: reg 0x10: [mem 0x1ffe0000000-0x1ffe000701f]
[ 1.222371] pci 0000:01:02.0: [1002:4750] type 00 class 0x030000
[ 1.222429] pci 0000:01:02.0: reg 0x10: [mem 0x1ffe1000000-0x1ffe1ffffff]
[ 1.222476] pci 0000:01:02.0: reg 0x18: [mem 0x1ffe2000000-0x1ffe2000fff]
[ 1.223007] pci 0000:01:03.0: [1095:0646] type 00 class 0x01018f
[ 1.223064] pci 0000:01:03.0: reg 0x10: [io 0x1fe02c00000-0x1fe02c00007]
[ 1.223111] pci 0000:01:03.0: reg 0x14: [io 0x1fe02c00008-0x1fe02c0000b]
[ 1.223159] pci 0000:01:03.0: reg 0x18: [io 0x1fe02c00010-0x1fe02c00017]
[ 1.223206] pci 0000:01:03.0: reg 0x1c: [io 0x1fe02c00018-0x1fe02c0001b]
[ 1.223253] pci 0000:01:03.0: reg 0x20: [io 0x1fe02c00020-0x1fe02c0002f]
[ 1.223851] pci 0000:00:01.0: [108e:5000] type 01 class 0x060400
[ 1.224324] pci_bus 0000:02: extended config space not accessible
[ 1.224693] pci 0000:02:01.0: [1033:0035] type 00 class 0x0c0310
[ 1.224753] pci 0000:02:01.0: reg 0x10: [mem 0x1ff00002000-0x1ff00002fff]
[ 1.224844] pci 0000:02:01.0: supports D1 D2
[ 1.224861] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot
[ 1.225450] pci 0000:02:01.1: [1033:0035] type 00 class 0x0c0310
[ 1.225509] pci 0000:02:01.1: reg 0x10: [mem 0x1ff00004000-0x1ff00004fff]
[ 1.225597] pci 0000:02:01.1: supports D1 D2
[ 1.225613] pci 0000:02:01.1: PME# supported from D0 D1 D2 D3hot
[ 1.226150] pci 0000:02:01.2: [1033:00e0] type 00 class 0x0c0320
[ 1.226210] pci 0000:02:01.2: reg 0x10: [mem 0x1ff00006000-0x1ff000060ff]
[ 1.226298] pci 0000:02:01.2: supports D1 D2
[ 1.226314] pci 0000:02:01.2: PME# supported from D0 D1 D2 D3hot
[ 1.226861] pci 0000:02:03.0: [1814:0201] type 00 class 0x028000
[ 1.226928] pci 0000:02:03.0: reg 0x10: [mem 0x1ff00008000-0x1ff00009fff]
[ 1.227559] pci 0000:01:02.0: can't claim VGA legacy [mem
0x1ff000a0000-0x1ff000bffff]: no compatible bridge window
[ 1.237525] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[ 1.237581] HugeTLB registered 8.00 MiB page size, pre-allocated 0 pages
[ 1.237623] HugeTLB registered 256 MiB page size, pre-allocated 0 pages
[ 1.237666] HugeTLB registered 2.00 GiB page size, pre-allocated 0 pages
[ 1.241902] pci 0000:01:02.0: vgaarb: VGA device added:
decodes=io+mem,owns=none,locks=none
[ 1.241995] pci 0000:01:02.0: vgaarb: bridge control possible
[ 1.242039] pci 0000:01:02.0: vgaarb: setting as boot device (VGA legacy
resources not available)
[ 1.242086] vgaarb: loaded
[ 1.242440] pps_core: LinuxPPS API ver. 1 registered
[ 1.242483] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo
Giometti <giometti@linux.it>
[ 1.242571] PTP clock support registered
[ 1.245505] /pci@1f,0/pci@1,1/ebus@1/eeprom@14,0: Mostek regs at
0x1fff1000000
[ 1.246398] AUXIO: Found device at /pci@1f,0/pci@1,1/ebus@1/auxio@14,726000
[ 1.246950] clocksource: Switched to clocksource tick
[ 1.398814] VFS: Disk quotas dquot_6.6.0
[ 1.399152] VFS: Dquot-cache hash table entries: 1024 (order 0, 8192 bytes)
[ 1.401017] AppArmor: AppArmor Filesystem Enabled
[ 1.422380] NET: Registered protocol family 2
[ 1.424148] tcp_listen_portaddr_hash hash table entries: 512 (order: 0,
8192 bytes)
[ 1.424281] TCP established hash table entries: 8192 (order: 3, 65536
bytes)
[ 1.424732] TCP bind hash table entries: 8192 (order: 3, 65536 bytes)
[ 1.425182] TCP: Hash tables configured (established 8192 bind 8192)
[ 1.425587] UDP hash table entries: 512 (order: 1, 16384 bytes)
[ 1.425750] UDP-Lite hash table entries: 512 (order: 1, 16384 bytes)
[ 1.426376] NET: Registered protocol family 1
[ 1.426664] pci 0000:02:01.0: enabling device (0000 -> 0002)
[ 1.426759] pci 0000:02:01.1: enabling device (0000 -> 0002)
[ 1.426847] pci 0000:02:01.2: enabling device (0000 -> 0002)
[ 1.426921] PCI: CLS 64 bytes, default 64
[ 1.427392] Unpacking initramfs...
[ 5.023634] Freeing initrd memory: 20456K
[ 5.024305] power: Control reg at 1fff1724000
[ 5.028569] Initialise system trusted keyrings
[ 5.029219] workingset: timestamp_bits=46 max_order=17 bucket_order=0
[ 5.050629] zbud: loaded
[ 18.398616] Key type asymmetric registered
[ 18.398670] Asymmetric key parser 'x509' registered
[ 18.399166] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
250)
[ 18.399655] io scheduler noop registered
[ 18.399698] io scheduler deadline registered
[ 18.400428] io scheduler cfq registered (default)
[ 18.400474] io scheduler mq-deadline registered
[ 18.401901] atyfb: 3D RAGE PRO (Mach64 GP, PQFP, PCI) [0x4750 rev 0x7c]
[ 18.402025] atyfb: 4M SGRAM (1:1), 14.31818 MHz XTAL, 230 MHz PLL, 100 Mhz
MCLK, 100 MHz XCLK
[ 18.402641] fbcon: ATY Mach64 (fb0) is primary device
[ 18.471444] Console: switching to colour frame buffer device 144x56
[ 18.494703] atyfb: fb0: ATY Mach64 frame buffer device on PCI
[ 18.496919] /pci@1f,0/pci@1,1/ebus@1/su@14,3083f8: Keyboard port at
1fff13083f8, irq 6
[ 18.497765] /pci@1f,0/pci@1,1/ebus@1/su@14,3062f8: Mouse port at
1fff13062f8, irq 7
[ 18.498930] f0061cc8: ttyS0 at MMIO 0x1fff1400000 (irq = 5, base_baud =
115200) is a SAB82532 V3.2
[ 18.500115] f0061cc8: ttyS1 at MMIO 0x1fff1400040 (irq = 5, base_baud =
115200) is a SAB82532 V3.2
[ 18.503051] mousedev: PS/2 mouse device common for all mice
[ 18.837366] Floppy drive(s): fd0 is 1.44M
[ 18.837642] rtc-m48t59 rtc-m48t59.0: registered as rtc0
[ 18.838225] ledtrig-cpu: registered to indicate activity on CPUs
[ 18.839014] IPv6: Loaded, but administratively disabled, reboot required to
enable
[ 18.839300] mip6: Mobile IPv6
[ 18.839425] mip6: mip6_init: can't add xfrm type(destopt)
[ 18.839639] NET: Registered protocol family 17
[ 18.839846] mpls_gso: MPLS GSO support
[ 18.841705] registered taskstats version 1
[ 18.841877] Loading compiled-in X.509 certificates
[ 19.155583] input: Sun Type 5 keyboard
as /devices/root/f005fa24/f0060218/f0061568/f00635f8/serio0/input/input0
[ 19.157450] input: Sun Mouse
as /devices/root/f005fa24/f0060218/f0061568/f0064e58/serio1/input/input1
[ 19.189134] FDC 0 is a National Semiconductor PC87306
[ 20.491796] Loaded X.509 cert 'secure-boot-test-key-lfaraone:
97c1b25cddf9873ca78a58f3d73bf727d2cf78ff'
[ 20.492326] zswap: loaded using pool lzo/zbud
[ 20.492824] AppArmor: AppArmor sha1 policy hashing enabled
[ 20.493585] rtc-m48t59 rtc-m48t59.0: setting system clock to 2025-08-01
09:23:52 UTC (1754040232)
[ 20.501067] This architecture does not have kernel memory protection.
[ 21.291220] attempt to access beyond end of device
[ 21.291463] fd0: rw=0, want=16, limit=8
[ 21.291623] floppy: error 10 while reading block 0
[ 21.291873] Kernel unaligned access at TPC[49b91c]
__wake_up_common+0x3c/0x1a0
[ 21.302201] Unable to handle kernel NULL pointer dereference in mna handler
[ 21.302221] at virtual address 0000000000000001
[ 21.322740] current->{active_,}mm->context = 0000000000000033
[ 21.332988] current->{active_,}mm->pgd = fffff80022490000
[ 21.343154] \|/ ____ \|/
"@'/ .. \`@"
/_| \__/ |_\
\__U_/
[ 21.383763] systemd-udevd(73): Oops [#1]
[ 21.393834] CPU: 0 PID: 73 Comm: systemd-udevd Not tainted 4.18.0-1-sparc64
#1 Debian 4.18.6-1
[ 21.404225] TSTATE: 0000008011e01603 TPC: 000000000049b91c TNPC:
000000000049b920 Y: 00000000 Not tainted
[ 21.414746] TPC: <__wake_up_common+0x3c/0x1a0>
[ 21.425204] g0: 0000000000000000 g1: 0000000000000001 g2: 0000000000000006
g3: 0000000000000000
[ 21.435923] g4: fffff800223f9800 g5: 000000000013b4a0 g6: fffff80022480000
g7: 0000000000000006
[ 21.446703] o0: 0000000000000026 o1: ffffffffffffffff o2: 0000000000000000
o3: 0000000000000000
[ 21.457466] o4: 0000000000b7bed0 o5: fffff80022482fe8 sp: fffff80022482551
ret_pc: 00000000004afa80
[ 21.468210] RPC: <vprintk_default+0x20/0x40>
[ 21.478912] l0: ffffffffffffffe9 l1: 0000000000000000 l2: 0000000000000001
l3: 0000000000b5125a
[ 21.489978] l4: 0000000000000002 l5: 00000600004d29e8 l6: 0000000000000000
l7: 0000000000000090
[ 21.501099] i0: fffff80022483418 i1: 0000000000000003 i2: 0000000000000001
i3: 0000000000000000
[ 21.512304] i4: 0000000000000000 i5: 0000000000000000 i6: fffff80022482601
i7: 000000000049bb80
[ 21.523495] I7: <__wake_up_locked+0x20/0x40>
[ 21.534594] Call Trace:
[ 21.545535] [000000000049bb80] __wake_up_locked+0x20/0x40
[ 21.556547] [000000000049c7d4] complete+0x34/0x60
[ 21.567464] [000000000084479c] floppy_rb0_cb+0x1c/0x80
[ 21.578330] [0000000000719f5c] bio_endio+0x11c/0x180
[ 21.589077] [0000000000720720] generic_make_request_checks+0x60/0x620
[ 21.599887] [0000000000722aac] generic_make_request+0x4c/0x360
[ 21.610499] [0000000000722e14] submit_bio+0x54/0x180
[ 21.621167] [00000000008448b0] __floppy_read_block_0+0xb0/0x140
[ 21.631727] [0000000000844bdc] floppy_revalidate+0x29c/0x3a0
[ 21.642252] [000000000063c16c] check_disk_change+0x4c/0x60
[ 21.652734] [00000000008456a8] floppy_open+0x308/0x3c0
[ 21.663164] [000000000063ca7c] __blkdev_get+0xbc/0x500
[ 21.673474] [000000000063cff4] blkdev_get+0x134/0x340
[ 21.683660] [000000000063d518] blkdev_open+0x98/0xc0
[ 21.693791] [00000000005f7da0] do_dentry_open+0x200/0x380
[ 21.703911] [00000000005f8fcc] vfs_open+0x4c/0x80
[ 21.713984] Disabling lock debugging due to kernel taint
[ 21.724148] Caller[000000000049bb80]: __wake_up_locked+0x20/0x40
[ 21.734363] Caller[000000000049c7d4]: complete+0x34/0x60
[ 21.744369] Caller[000000000084479c]: floppy_rb0_cb+0x1c/0x80
[ 21.754226] Caller[0000000000719f5c]: bio_endio+0x11c/0x180
[ 21.763922] Caller[0000000000720720]:
generic_make_request_checks+0x60/0x620
[ 21.773529] Caller[0000000000722aac]: generic_make_request+0x4c/0x360
[ 21.782944] Caller[0000000000722e14]: submit_bio+0x54/0x180
[ 21.792299] Caller[00000000008448b0]: __floppy_read_block_0+0xb0/0x140
[ 21.801564] Caller[0000000000844bdc]: floppy_revalidate+0x29c/0x3a0
[ 21.810669] Caller[000000000063c16c]: check_disk_change+0x4c/0x60
[ 21.819676] Caller[00000000008456a8]: floppy_open+0x308/0x3c0
[ 21.828720] Caller[000000000063ca7c]: __blkdev_get+0xbc/0x500
[ 21.837709] Caller[000000000063cff4]: blkdev_get+0x134/0x340
[ 21.846663] Caller[000000000063d518]: blkdev_open+0x98/0xc0
[ 21.855570] Caller[00000000005f7da0]: do_dentry_open+0x200/0x380
[ 21.864404] Caller[00000000005f8fcc]: vfs_open+0x4c/0x80
[ 21.873125] Caller[000000000060bb68]: path_openat+0x5e8/0x1440
[ 21.881766] Caller[000000000060db0c]: do_filp_open+0x4c/0xc0
[ 21.890352] Caller[00000000005f9458]: do_sys_open+0x178/0x220
[ 21.898938] Caller[00000000005f9560]: sys_openat+0x20/0x40
[ 21.907479] Caller[0000000000406114]: linux_sparc_syscall+0x34/0x44
[ 21.916120] Caller[fffff8010013b4c4]: 0xfffff8010013b4c4
[ 21.924814] Instruction DUMP:
[ 21.924832] 80a60001
[ 21.933573] 02600023
[ 21.942244] a410001a
[ 21.950707] <e25c2018>
[ 21.958915] a6102000
[ 21.966887] a2047fe8
[ 21.974638] e4040000
[ 21.982263] 90100010
[ 21.989737] 9610001c
[ 22.302168] hme 0000:01:01.1: enabling device (0140 -> 0142)
[ 22.330345] usbcore: registered new interface driver usbfs
[ 22.352099] sunhme.c:v3.10 August 26, 2008 David S. Miller
(davem@davemloft.net)
[ 22.382507] eth0: HAPPY MEAL (PCI/CheerIO) 10/100BaseT Ethernet
[ 22.382523] 08:00:20:e5:01:30
[ 22.398737] usbcore: registered new interface driver hub
[ 22.437994] usbcore: registered new device driver usb
[ 22.456977] SCSI subsystem initialized
[ 22.491349] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 22.532267] ehci-pci: EHCI PCI platform driver
[ 22.542003] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 22.574766] ehci-pci 0000:02:01.2: EHCI Host Controller
[ 22.615290] ehci-pci 0000:02:01.2: new USB bus registered, assigned bus
number 1
[ 22.623219] libata version 3.00 loaded.
[ 22.648081] scsi host0: pata_cmd64x
[ 22.657800] ehci-pci 0000:02:01.2: irq 17, io mem 0x1ff00006000
[ 22.687269] scsi host1: pata_cmd64x
[ 22.698504] ehci-pci 0000:02:01.2: USB 2.0 started, EHCI 0.95
[ 22.720919] ata1: PATA max MWDMA2 cmd 0x1fe02c00000 ctl 0x1fe02c00008 bmdma
0x1fe02c00020 irq 14
[ 22.728840] ata2: PATA max MWDMA2 cmd 0x1fe02c00010 ctl 0x1fe02c00018 bmdma
0x1fe02c00028 irq 14
[ 22.736848] pata_cmd64x: active 10 recovery 10 setup 3.
[ 22.736867] pata_cmd64x: active 10 recovery 10 setup 3.
[ 22.740228] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002,
bcdDevice= 4.18
[ 22.748207] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 22.756183] usb usb1: Product: EHCI Host Controller
[ 22.764100] usb usb1: Manufacturer: Linux 4.18.0-1-sparc64 ehci_hcd
[ 22.772071] usb usb1: SerialNumber: 0000:02:01.2
[ 22.897848] hub 1-0:1.0: USB hub found
[ 22.906215] ata1.00: ATA-3: ST39140A, 861000, max UDMA/33
[ 22.914263] ata1.00: 17803440 sectors, multi 16: LBA
[ 22.922293] pata_cmd64x: active 3 recovery 1 setup 1.
[ 22.922317] pata_cmd64x: active 3 recovery 1 setup 1.
[ 22.936973] hme 0000:01:01.1 enp1s1f1: renamed from eth0
[ 22.955675] hub 1-0:1.0: 2 ports detected
[ 22.977908] scsi 0:0:0:0: Direct-Access ATA ST39140A 00
PQ: 0 ANSI: 5
[ 22.995608] ohci-pci: OHCI PCI platform driver
[ 23.012199] pata_cmd64x: active 10 recovery 10 setup 3.
[ 23.012220] pata_cmd64x: active 10 recovery 10 setup 3.
[ 23.026674] ohci-pci 0000:02:01.0: OHCI PCI host controller
[ 23.050888] ohci-pci 0000:02:01.0: new USB bus registered, assigned bus
number 2
[ 23.059487] ohci-pci 0000:02:01.0: irq 15, io mem 0x1ff00002000
[ 23.637214] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001,
bcdDevice= 4.18
[ 23.645852] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 23.654490] usb usb2: Product: OHCI PCI host controller
[ 23.663133] usb usb2: Manufacturer: Linux 4.18.0-1-sparc64 ohci_hcd
[ 23.671841] usb usb2: SerialNumber: 0000:02:01.0
[ 23.680950] ata2.00: ATAPI: HL-DT-STDVD-ROM GDR8163B, 0L15, max UDMA/33
[ 23.689844] pata_cmd64x: active 3 recovery 1 setup 1.
[ 23.689868] pata_cmd64x: active 3 recovery 1 setup 1.
[ 23.694945] hub 2-0:1.0: USB hub found
[ 23.704027] hub 2-0:1.0: 1 port detected
[ 23.715600] ohci-pci 0000:02:01.1: OHCI PCI host controller
[ 23.724915] ohci-pci 0000:02:01.1: new USB bus registered, assigned bus
number 3
[ 23.734071] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD-ROM GDR8163B 0L15
PQ: 0 ANSI: 5
[ 23.743807] ohci-pci 0000:02:01.1: irq 16, io mem 0x1ff00004000
[ 24.355370] sd 0:0:0:0: [sda] 17803440 512-byte logical blocks: (9.12
GB/8.49 GiB)
[ 24.375955] floppy driver state
[ 24.385526] -------------------
[ 24.395127] now=4294898119 last interrupt=4294896817 diff=1302 last called
handler=reset_interrupt
[ 24.405147] timeout_message=lock fdc
[ 24.415166] last output bytes:
[ 24.425255] 0 0 0
[ 24.435374] 0 0 0
[ 24.445436] 0 0 0
[ 24.455342] 8 80 4294896817
[ 24.465187] 8 80 4294896817
[ 24.474866] 8 80 4294896817
[ 24.484334] 8 80 4294896817
[ 24.493652] e 80 4294896817
[ 24.502874] 13 80 4294896817
[ 24.512052] 0 90 4294896817
[ 24.521102] 1a 90 4294896817
[ 24.530009] 0 90 4294896817
[ 24.538743] 12 80 4294896817
[ 24.547341] 0 90 4294896817
[ 24.555833] 14 80 4294896817
[ 24.564175] 18 80 4294896817
[ 24.572350] 8 80 4294896817
[ 24.580349] 8 80 4294896817
[ 24.588201] 8 80 4294896817
[ 24.595877] 8 80 4294896817
[ 24.603325] last result at 4294896818
[ 24.610824] last redo_fd_request at 4294896818
[ 24.618215] status=80
[ 24.625468] fdc_busy=1
[ 24.632620] cont= (null)
[ 24.639727] current_req= (null)
[ 24.646795] command_status=-1
[ 24.662485] sd 0:0:0:0: [sda] Write Protect is off
[ 24.669582] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 24.669786] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled,
doesn't support DPO or FUA
[ 24.681971] floppy0: floppy timeout called
[ 24.689253] no cont in shutdown!
[ 24.696388] floppy0: floppy_shutdown: timeout handler died.
[ 24.704440] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001,
bcdDevice= 4.18
[ 24.711772] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 24.719230] usb usb3: Product: OHCI PCI host controller
[ 24.726440] usb usb3: Manufacturer: Linux 4.18.0-1-sparc64 ohci_hcd
[ 24.733571] usb usb3: SerialNumber: 0000:02:01.1
[ 24.740812] sda: sda1 sda2 sda3 sda4
[ 24.747874] sr 1:0:0:0: [sr0] scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda
tray
[ 24.755032] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 24.771013] sd 0:0:0:0: [sda] Attached SCSI disk
[ 24.794197] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 24.824835] hub 3-0:1.0: USB hub found
[ 24.838347] hub 3-0:1.0: 1 port detected
[ 24.932785] ata_id[95]: unable to open '/dev/sr0'
[ 25.146441] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 25.170170] ata_id[97]: unable to open '/dev/sr0'
[ 25.329426] usb 1-1: New USB device found, idVendor=2001, idProduct=3c1b,
bcdDevice= 1.01
[ 25.337794] usb 1-1: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 25.345031] usb 1-1: Product: 11n Adapter
[ 25.352111] usb 1-1: Manufacturer: Ralink
[ 25.359153] usb 1-1: SerialNumber: 1.0
[ 25.662413] usb 1-2: new high-speed USB device number 3 using ehci-pci
[ 25.844717] usb 1-2: New USB device found, idVendor=0846, idProduct=9030,
bcdDevice= 1.08
[ 25.852320] usb 1-2: New USB device strings: Mfr=16, Product=32,
SerialNumber=48
[ 25.859794] usb 1-2: Product: WNA1100
[ 25.866893] usb 1-2: Manufacturer: NETGEAR WNA
[ 25.874098] usb 1-2: SerialNumber: 12345
[ 25.933234] random: fast init done
[ 27.266469] crc32c_sparc64: sparc64 crc32c opcode not available.
[ 27.366506] raid6: int64x1 gen() 164 MB/s
[ 27.438473] raid6: int64x1 xor() 84 MB/s
[ 27.510346] raid6: int64x2 gen() 246 MB/s
[ 27.582607] raid6: int64x2 xor() 112 MB/s
[ 27.654478] raid6: int64x4 gen() 233 MB/s
[ 27.726347] raid6: int64x4 xor() 120 MB/s
[ 27.798659] raid6: int64x8 gen() 166 MB/s
[ 27.874373] raid6: int64x8 xor() 104 MB/s
[ 27.882134] raid6: using algorithm int64x2 gen() 246 MB/s
[ 27.889999] raid6: .... xor() 112 MB/s, rmw enabled
[ 27.897947] raid6: using intx1 recovery algorithm
[ 27.924697] xor: automatically using best checksumming function VIS
[ 28.279800] PM: Image not found (code -22)
[ 28.421265] aes_sparc64: sparc64 aes opcodes not available.
[ 28.464565] crc32c_sparc64: sparc64 crc32c opcode not available.
[ 32.829307] EXT4-fs (sda2): mounted filesystem with ordered data mode.
Opts: (null)
[ 37.391920] systemd[1]: systemd 234 running in system mode. (+PAM +AUDIT
+SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS
+ACL +XZ +LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN
default-hierarchy=hybrid)
[ 37.412514] systemd[1]: Detected architecture sparc64.
[ 37.512907] systemd[1]: Set hostname to <debian>.
[ 42.002655] random: systemd: uninitialized urandom read (16 bytes read)
[ 42.013879] systemd[1]: Set up automount Arbitrary Executable File Formats
File System Automount Point.
[ 42.036297] random: systemd: uninitialized urandom read (16 bytes read)
[ 42.047013] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 42.069324] random: systemd: uninitialized urandom read (16 bytes read)
[ 42.080422] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 42.103007] systemd[1]: Reached target Remote File Systems.
[ 42.125831] systemd[1]: Listening on Syslog Socket.
[ 42.148760] systemd[1]: Listening on Journal Socket (/dev/log).
[ 42.171855] systemd[1]: Listening on udev Kernel Socket.
[ 42.399105] systemd[1]: Reached target Paths.
[ 42.423737] systemd[1]: Listening on Journal Audit Socket.
[ 42.449341] systemd[1]: Reached target Slices.
[ 42.475915] systemd[1]: Listening on Journal Socket.
[ 42.658122] systemd[1]: Starting Set the console keyboard layout...
[ 42.698560] systemd[1]: Starting Journal Service...
[ 42.739360] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 42.975377] systemd[1]: Starting Load Kernel Modules...
[ 43.018439] systemd[1]: Starting Create list of required static device
nodes for the current kernel...
[ 43.056839] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 43.092164] systemd[1]: Mounting POSIX Message Queue File System...
[ 44.855418] systemd-journald[201]: Received request to flush runtime
journal from PID 1
[ 45.600942] systemd-journald[201]:
File /var/log/journal/625b00c7c5ff4357aea72109ed16e5a2/system.journal
corrupted or uncleanly shut down, renaming and replacing.
[ 48.463421] /pci@1f,0/pci@1,1/ebus@1/flashprom@10,0: OBP Flash, RD
1fff0000000[100000] WR 1fff0000000[100000]
[ 49.365931] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 49.458593] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 53.474690] rt2500pci 0000:02:03.0: enabling device (0000 -> 0002)
[ 53.495668] ieee80211 phy0: rt2x00_set_chip: Info - Chipset detected - rt:
2560, rf: 0003, rev: 0004
[ 53.677752] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 53.844941] ieee80211 phy1: rt2x00_set_rt: Info - RT chipset 3070, rev 0201
detected
[ 53.877717] ieee80211 phy1: rt2x00_set_rf: Info - RF chipset 0005 detected
[ 54.225545] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[ 54.234679] usbcore: registered new interface driver rt2800usb
[ 54.238968] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 54.618837] rt2500pci 0000:02:03.0 wlp2s3: renamed from wlan1
[ 54.727038] rt2800usb 1-1:1.0 wlx84c9b2d6415e: renamed from wlan0
[ 54.913527] usb 1-2: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw
requested
[ 54.920834] usbcore: registered new interface driver ath9k_htc
[ 55.141359] usb 1-2: firmware: failed to load ath9k_htc/htc_9271-1.4.0.fw
(-2)
[ 55.141786] firmware_class: See https://wiki.debian.org/Firmware for
information about missing firmware
[ 55.142229] usb 1-2: Direct firmware load for ath9k_htc/htc_9271-1.4.0.fw
failed with error -2
[ 55.142842] usb 1-2: ath9k_htc: Firmware htc_9271.fw requested
[ 55.834861] usb 1-2: firmware: direct-loading firmware htc_9271.fw
[ 55.870525] EXT4-fs (sda1): mounting ext3 file system using the ext4
subsystem
[ 56.126394] usb 1-2: ath9k_htc: Transferred FW: htc_9271.fw, size: 50980
[ 56.166244] EXT4-fs (sda1): recovery complete
[ 56.166605] EXT4-fs (sda1): mounted filesystem with ordered data mode.
Opts: (null)
[ 56.366334] ath9k_htc 1-2:1.0: ath9k_htc: HTC initialized with 33 credits
[ 56.369234] Adding 698816k swap on /dev/sda4. Priority:-2 extents:1
across:698816k FS
[ 57.434947] ath9k_htc 1-2:1.0: ath9k_htc: FW Version: 1.3
[ 57.435550] ath9k_htc 1-2:1.0: FW RMW support: Off
[ 57.435877] ath: EEPROM regdomain: 0x60
[ 57.435884] ath: EEPROM indicates we should expect a direct regpair map
[ 57.435919] ath: Country alpha2 being used: 00
[ 57.435925] ath: Regpair used: 0x60
[ 57.465351] ieee80211 phy2: Atheros AR9271 Rev:1
[ 57.676936] ath9k_htc 1-2:1.0 wlxe0469a0d720c: renamed from wlan0
[ 61.568530] ieee80211 phy1: rt2x00lib_request_firmware: Info - Loading
firmware file 'rt2870.bin'
[ 61.784937] rt2800usb 1-1:1.0: firmware: direct-loading firmware rt2870.bin
[ 61.785439] ieee80211 phy1: rt2x00lib_request_firmware: Info - Firmware
detected - version: 0.36
[ 63.833885] wlx84c9b2d6415e: authenticate with 00:18:4d:68:d0:e4
[ 63.901731] wlx84c9b2d6415e: send auth to 00:18:4d:68:d0:e4 (try 1/3)
[ 63.906677] wlx84c9b2d6415e: authenticated
[ 63.907351] rt2800usb 1-1:1.0 wlx84c9b2d6415e: disabling HT as WMM/QoS is
not supported by the AP
[ 63.907878] rt2800usb 1-1:1.0 wlx84c9b2d6415e: disabling VHT as WMM/QoS is
not supported by the AP
[ 63.913503] wlx84c9b2d6415e: associate with 00:18:4d:68:d0:e4 (try 1/3)
[ 63.921140] wlx84c9b2d6415e: RX AssocResp from 00:18:4d:68:d0:e4
(capab=0x461 status=0 aid=3)
[ 63.934204] wlx84c9b2d6415e: associated
[ 164.954183] random: crng init done
[ 164.954517] random: 7 urandom warning(s) missed due to ratelimiting
[ 189.354818] enp1s1f1: Auto-Negotiation unsuccessful, trying force link mode
[ 199.080499] enp1s1f1: Link down, cable problem?
[ 211.238107] enp1s1f1: Auto-Negotiation unsuccessful, trying force link mode
[ 220.964717] enp1s1f1: Link down, cable problem?
[ 233.123158] enp1s1f1: Auto-Negotiation unsuccessful, trying force link mode
[ 242.850143] enp1s1f1: Link down, cable problem?
[ 255.006394] enp1s1f1: Auto-Negotiation unsuccessful, trying force link mode
[ 264.729067] enp1s1f1: Link down, cable problem?
[ 275.472372] fuse init (API version 7.27)
[ 276.883614] enp1s1f1: Auto-Negotiation unsuccessful, trying force link mode
...
...
>>>On Friday 01 August 2025 11:26:30 John Paul Adrian Glaubitz wrote:
> On Fri, 2025-08-01 at 11:05 +0200, sacarde@libero.it wrote:
> > hi,
> > It may be decisive to update the kernel to:
> >
> > linux-image-sparc64/unstable 6.12.38-1 sparc64 [upgradable from: 4.18+98]
>
> Why though?
>
> >From the logs I can see that your wireless card is actually connecting
>
> to your WiFi network:
> > [ 279.995250] rt2800usb 1-1:1.0 wlx84c9b2d6415e:
> > (...)
> > [389.433721] wlx84c9b2d6415e: authenticate with 00:18:4d:68:d0:e4
> > [389.535353] wlx84c9b2d6415e: send auth to 00:18:4d:68:d0:e4 (try 1/3)
> > [389.537245] wlx84c9b2d6415e: authenticated
> > [ 389.539896] rt2800usb 1-1:1.0 wlx84c9b2d6415e: disabling HT as WMM/QoS
> > is not supported by the AP [ 389.540467] rt2800usb 1-1:1.0
> > wlx84c9b2d6415e: disabling VHT as WMM/QoS is not supported by the AP
> > [389.541737] wlx84c9b2d6415e: associate with 00:18:4d:68:d0:e4 (try 1/3)
> > 389.546499] wlx84c9b2d6415e: RX AssocResp from 00:18:4d:68:d0:e4
> > (capab=0x461 status=0 aid=3)
> > [ 389.560570] wlx84c9b2d6415e: associated
>
> I assume you're just not configuring the interface. Try setting up DHCP
> for the interface wlx84c9b2d6415e.
>
> Adrian
Reply to: