Re: Sun Ultra 5 cgroup fail after clean install
On Sun, Jul 23, 2023 at 08:30:52AM +0200, John Paul Adrian Glaubitz wrote:
> Hi Joacim!
>
> On Sat, 2023-07-22 at 22:53 +0200, Joacim Nilsson wrote:
> > Hi!
> > After installning debian-12.0.0-sparc64-NETINST-1.iso
> > on my Sun Ultra 5
> >
> > i get
> >
> > Loading Linux 6.3.0-2-sparc64 ...
> > Loading initial ramdisk ...
> >
> > Failed to get cgroup, ignoring: No medium found
> > /dev/sda2: recovering journal
> > /dev/sda2: clean, 32037/15204352 files, 1785366/60804430 blocks
> > [ 49.359252] /dev/sda: Can't open blockdev
> > [FAILED] Failed to mount boot.mount - /boot.
> > [DEPEND] Dependency failed for local-fs.target - Local File Systems.
> > You are in emergency mode. After logging in, type "journalctl -xb" to view
> > system logs, "systemctl reboot" to reboot, or "exit"Give root password for maintenance
> > (or press Control-D to continue):
> >
> > I can mount the boot device if i log in
> > I thought at first my hardware was causing issues
> > But i have removed all non sun cards from the machine
> >
> > And *BSD installs just fine
> >
> > Can it be a too large disk?
> > Installer was complaning about a huge cylinder count.
>
> How was the disk partioned? Did you use manual partioning or did you use
> the installer's suggested defaults?
>
> The disk itself won't be too large, but it could be that you created a
> partition that does not fit the geometry of the Sun partioning theme.
>
> Adrian
>
> --
> .''`. John Paul Adrian Glaubitz
> : :' : Debian Developer
> `. `' Physicist
> `- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
I used the installer suggested
To get more information i booted the 6.1.0-9 kernel
That one works!
6.3.0-2 does not for me
output from lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTS
fd0 2:0 1 4K 0 disk
sda 8:0 0 232.9G 0 disk
├─sda1 8:1 0 488.3M 0 part /boot
├─sda2 8:2 0 232G 0 part /
├─sda3 8:3 0 232.9G 0 part
└─sda4 8:4 0 469.4M 0 part [SWAP]
sr0 11:0 1 1024M 0 rom
--
Mvh
Joacim Nilsson
realnovum@gmail.com
Reply to: