Re: GRUB testers on SPARC needed
Hi Adrian,
On Fri, 2017-12-08 at 13:24 +0100, John Paul Adrian Glaubitz wrote:
> Hi!
>
> We're in the process of migrating Debian for sparc64 from SILO to
> GRUB as GRUB upstream is adding support for modern SPARC machines
> thanks to the work of Eric Snowberg from Oracle.
>
> In order to make sure GRUB works on all machines supported by the
> sparc64 port, we need your help to test GRUB on your particular
> hardware, the older your machine, the better.
> 7. Report back to the list and include your hardware and partition
> setup
Probing system devices
Probing memory
Probing I/O buses
screen not found.
keyboard not found.
Keyboard not present. Using ttya for input and output.
Probing system devices
Probing memory
Probing I/O buses
Sun Fire V440, No Keyboard
Copyright 2010 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.30.4.a, 20480 MB memory installed, Serial #57654521.
Ethernet address 0:3:ba:6f:bc:f9, Host ID: 836fbcf9.
booting with command: boot
Boot device: disk File and args:
GRUB Loading kernel...
screen not found.
error: out of memory.
error: no suitable video mode found.
GNU GRUB version 2.02-2+sparc64.3
Loading Linux 4.13.0-1-sparc64-smp ...
# lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 136.7G 0 disk
├─sda1 8:1 0 902.1M 0 part /boot
├─sda2 8:2 0 135.9G 0 part
│ └─md0 9:0 0 135.7G 0 raid1 /
└─sda3 8:3 0 136.7G 0 part
sdb 8:16 0 136.7G 0 disk
├─sdb1 8:17 0 902.1M 0 part
├─sdb2 8:18 0 135.9G 0 part
│ └─md0 9:0 0 135.7G 0 raid1 /
└─sdb3 8:19 0 136.7G 0 part
sdc 8:32 0 33.9G 0 disk
├─sdc1 8:33 0 30G 0 part
│ └─md1 9:1 0 30G 0 raid1 /home
└─sdc2 8:34 0 3.9G 0 part [SWAP]
sdd 8:48 0 33.9G 0 disk
├─sdd1 8:49 0 30G 0 part
│ └─md1 9:1 0 30G 0 raid1 /home
└─sdd2 8:50 0 3.9G 0 part [SWAP]
sr0 11:0 1 197.2M 0 rom
The sda and sdb are Sun, sdc and sdd are GTP.
# uname -a
Linux deblnxsrv211 4.13.0-1-sparc64-smp #1 SMP Debian 4.13.4-2 (2017-
10-15) sparc64 GNU/Linux
Thanks,
Frans van Berckel
Reply to: