Re: No login prompt after booting in LDOM on SPARC Enterprise T5120
John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> writes:
> Can you check the contents of /sys/dev/char or /sys/class/tty?
Ok. Here are some outputs.
root@(none):/# ls /sys/dev/char/
10:1 10:62 1:7 4:12 4:2 4:27 4:34 4:41 4:49 4:56 4:63 7:0
10:139 10:63 1:8 4:13 4:20 4:28 4:35 4:42 4:5 4:57 4:64 7:1
10:231 13:63 1:9 4:14 4:21 4:29 4:36 4:43 4:50 4:58 4:7 7:128
10:234 1:1 254:0 4:15 4:22 4:3 4:37 4:44 4:51 4:59 4:8 7:129
10:58 1:11 4:0 4:16 4:23 4:30 4:38 4:45 4:52 4:6 4:9
10:59 1:3 4:1 4:17 4:24 4:31 4:39 4:46 4:53 4:60 5:0
10:60 1:4 4:10 4:18 4:25 4:32 4:4 4:47 4:54 4:61 5:1
10:61 1:5 4:11 4:19 4:26 4:33 4:40 4:48 4:55 4:62 5:2
root@(none):/# ls /sys/class/tty/
console tty12 tty19 tty25 tty31 tty38 tty44 tty50 tty57 tty63
ptmx tty13 tty2 tty26 tty32 tty39 tty45 tty51 tty58 tty7
tty tty14 tty20 tty27 tty33 tty4 tty46 tty52 tty59 tty8
tty0 tty15 tty21 tty28 tty34 tty40 tty47 tty53 tty6 tty9
tty1 tty16 tty22 tty29 tty35 tty41 tty48 tty54 tty60 ttyS0
tty10 tty17 tty23 tty3 tty36 tty42 tty49 tty55 tty61
tty11 tty18 tty24 tty30 tty37 tty43 tty5 tty56 tty62
root@(none):/# ls /sys/class/tty/ttyS0
close_delay dev io_type irq power uartclk
closing_wait device iomem_base line subsystem uevent
custom_divisor flags iomem_reg_shift port type xmit_fifo_size
root@(none):/# cat /sys/class/tty/ttyS0/dev
4:64
root@(none):/# ls /sys/dev/char/4\:64
close_delay dev io_type irq power uartclk
closing_wait device iomem_base line subsystem uevent
custom_divisor flags iomem_reg_shift port type xmit_fifo_size
I've also found this thing here: Will change anything if i add
/dev/ttyS0 to ACTIVE_CONSOLES?
root@(none):/# cat /etc/default/console-setup
# CONFIGURATION FILE FOR SETUPCON
# Consult the console-setup(5) manual page.
ACTIVE_CONSOLES="/dev/tty[1-6]"
CHARMAP="UTF-8"
CODESET="Lat15"
FONTFACE="Fixed"
FONTSIZE="8x16"
VIDEOMODE=
# The following is an example how to use a braille font
# FONT='lat9w-08.psf.gz brl-8x8.psf'
Thank you in Advance,
Gabriel
Reply to: