RE: Kernel panic 4.7.0-rc4-sparc64-smp on systemd-udevd
At the silo boot prompt try typing "modprobe.blacklist=qla2xxx" then press enter.
That will disable the on board fiber, but it may boot.
Does the blade 1000 use fc-al disks? I dont remember it using them, but I know it has an fc-al connector on the back.
Sent from my T-Mobile 4G LTE Device
-------- Original message --------
From: Frans van Berckel <fberckel@xs4all.nl>
Date: 7/1/2016 2:54 AM (GMT-05:00)
To: debian-sparc <debian-sparc@lists.debian.org>
Subject: Kernel panic 4.7.0-rc4-sparc64-smp on systemd-udevd
Booting Debian on a Sun-Blade-1000. But getting a kernel panic on
systemd-udevd. Attaching dmesg-sparc64-4.7-rc4-1-exp1.txt.
Good to know, non of the 4.x kernels are booting. The OLD 3.4 kernel
does, true. Anyone a idea how to solve this?
[ 67.750668] CPU: 1 PID: 88 Comm: systemd-udevd Not tainted 4.7.0-
rc4-sparc64-smp #1 Debian 4.7~rc4-1~exp1
[ 67.753938] Call Trace:
[ 67.757227] [0000000000560960] panic+0xe0/0x288
[ 67.760481] [0000000000429dec] cheetah_deferred_handler+0x1ec/0x460
[ 67.763765] [0000000000405e44] c_deferred+0x18/0x24
[ 67.767092] [000000001021da30] qla2x00_mailbox_command+0x890/0xe40
[qla2xxx]
[ 67.770341] [000000001021ffc8] qla2x00_init_firmware+0xe8/0x200
[qla2xxx]
[ 67.773591] [0000000010214f9c] qla2x00_init_rings+0x2dc/0x400
[qla2xxx]
[ 67.776850] [000000001021bfec]
qla2x00_initialize_adapter+0x44c/0x6a0 [qla2xxx]
[ 67.780099] [000000001020e6ac] qla2x00_probe_one+0xfec/0x2880
[qla2xxx]
[ 67.783280] [000000000074f940] pci_device_probe+0x80/0x100
[ 67.786519] [00000000007ceae0] driver_probe_device+0x1a0/0x460
[ 67.789758] [00000000007cee90] __driver_attach+0xf0/0x120
[ 67.793001] [00000000007cc47c] bus_for_each_dev+0x5c/0xa0
[ 67.796198] [00000000007ce19c] driver_attach+0x1c/0x40
[ 67.799341] [00000000007cdbb0] bus_add_driver+0x1f0/0x2a0
[ 67.802473] [00000000007cf9b4] driver_register+0x74/0x120
[ 67.805600] [000000000074e1d8] __pci_register_driver+0x38/0x60
Thanks,
Frans van Berckel
Reply to: