Re: debian-installer: cdrom vs. netboot
Hi,
>On 01/22/2016 11:59 AM, John Paul Adrian Glaubitz wrote:
>> Will post the updated NETINST ISO once it has been built.
>
>Alright, the new image seems to work as expected now:
>
>>
>https://people.debian.org/~glaubitz/debian-cd/debian-9.0-sparc64-NETINST-1.iso
>
>Haven't done a full test yet, but at least it downloads compoments
>from CD now.
>
>Please test and give feedback.
Well, doesn't work for me, looks like a problem with the scsi-cdrom driver.
On my ultra-60:
Jan 24 00:36:47 kernel: [ 576.719671] PCI: Enabling device: (0000:00:03.0), cmd 147
Jan 24 00:36:47 kernel: [ 576.720955] sym0: <875> rev 0x14 at pci 0000:00:03.0 irq 15
Jan 24 00:36:47 kernel: [ 576.793846] hme 0000:00:01.1 enp0s1f1: renamed from eth0
Jan 24 00:36:47 kernel: [ 576.946007] sym0: No NVRAM, ID 7, Fast-20, SE, parity checking
Jan 24 00:36:47 kernel: [ 577.049006] sym0: SCSI BUS has been reset.
Jan 24 00:36:47 kernel: [ 577.097130] scsi host0: sym-2.2.3
Jan 24 00:36:47 kernel: [ 577.139091] PCI: Enabling device: (0000:00:03.1), cmd 3
Jan 24 00:36:47 kernel: [ 577.140375] sym1: <875> rev 0x14 at pci 0000:00:03.1 irq 16
Jan 24 00:36:47 kernel: [ 577.293400] sym1: No NVRAM, ID 7, Fast-20, SE, parity checking
Jan 24 00:36:47 kernel: [ 577.369634] sym1: SCSI BUS has been reset.
Jan 24 00:36:47 kernel: [ 577.417761] scsi host1: sym-2.2.3
Jan 24 00:36:47 kernel: [ 580.045264] scsi 0:0:0:0: Direct-Access FUJITSU MAE3091L SUN9.0G 0706 PQ: 0 ANSI: 2
Jan 24 00:36:47 kernel: [ 580.141326] scsi target0:0:0: tagged command queuing enabled, command queue depth 16.
Jan 24 00:36:47 kernel: [ 580.235110] scsi target0:0:0: Beginning Domain Validation
Jan 24 00:36:47 kernel: [ 580.302396] scsi target0:0:0: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 16)
Jan 24 00:36:47 kernel: [ 580.390242] scsi target0:0:0: Domain Validation skipping write tests
Jan 24 00:36:47 kernel: [ 580.469373] scsi target0:0:0: Ending Domain Validation
Jan 24 00:36:47 kernel: [ 581.439264] scsi 0:0:4:0: CD-ROM PLEXTOR CD-ROM PX-12CS 1.01 PQ: 0 ANSI: 2
Jan 24 00:36:47 kernel: [ 581.539623] scsi target0:0:4: Beginning Domain Validation
Jan 24 00:36:47 kernel: [ 581.610901] scsi target0:0:4: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 15)
Jan 24 00:36:47 kernel: [ 581.700885] scsi target0:0:4: Domain Validation skipping write tests
Jan 24 00:36:47 kernel: [ 581.780144] scsi target0:0:4: Ending Domain Validation
Jan 24 00:36:47 kernel: [ 585.170325] sd 0:0:0:0: [sda] 17689267 512-byte logical blocks: (9.05 GB/8.43 GiB)
Jan 24 00:36:47 kernel: [ 585.266007] sr 0:0:4:0: [sr0] out of memory.
Jan 24 00:36:47 kernel: [ 585.320137] cdrom: Uniform CD-ROM driver Revision: 3.20
Jan 24 00:36:47 kernel: [ 585.388880] sr 0:0:4:0: Attached scsi CD-ROM sr0
Jan 24 00:36:47 kernel: [ 585.389044] sd 0:0:0:0: [sda] Write Protect is off
Jan 24 00:36:47 kernel: [ 585.449391] sd 0:0:0:0: [sda] Mode Sense: a7 00 00 08
Jan 24 00:36:47 kernel: [ 585.458020] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
Jan 24 00:36:47 kernel: [ 585.592516] sda: sda1 sda2 sda3
Jan 24 00:36:47 kernel: [ 585.649949] sd 0:0:0:0: [sda] Attached SCSI disk
...
Jan 24 00:37:16 main-menu[202]: INFO: Menu item 'cdrom-detect' selected
Jan 24 00:37:17 kernel: [ 616.351036] floppy0: Unable to allocate DMA memory
Jan 24 00:37:17 net/hw-detect.hotplug: Detected hotpluggable network interface enp0s1f1
Jan 24 00:37:17 kernel: [ 616.652965] sr 0:0:4:0: [sr0] unaligned transfer
Jan 24 00:37:17 kernel: [ 616.653114] sr 0:0:4:0: [sr0] unaligned transfer
Jan 24 00:37:17 kernel: [ 616.653184] sr 0:0:4:0: [sr0] unaligned transfer
Jan 24 00:37:17 kernel: [ 616.653253] sr 0:0:4:0: [sr0] unaligned transfer
Jan 24 00:37:17 kernel: [ 616.653321] sr 0:0:4:0: [sr0] unaligned transfer
Jan 24 00:37:17 kernel: [ 616.653390] sr 0:0:4:0: [sr0] unaligned transfer
Jan 24 00:37:17 kernel: [ 616.653458] sr 0:0:4:0: [sr0] unaligned transfer
Jan 24 00:37:17 kernel: [ 616.653526] sr 0:0:4:0: [sr0] unaligned transfer
Jan 24 00:37:17 kernel: [ 616.653594] sr 0:0:4:0: [sr0] unaligned transfer
Jan 24 00:37:17 kernel: [ 616.653663] sr 0:0:4:0: [sr0] unaligned transfer
Jan 24 00:37:17 kernel: [ 616.653731] sr 0:0:4:0: [sr0] unaligned transfer
Jan 24 00:37:17 kernel: [ 616.653799] sr 0:0:4:0: [sr0] unaligned transfer
Jan 24 00:37:17 kernel: [ 616.653867] sr 0:0:4:0: [sr0] unaligned transfer
Jan 24 00:37:17 kernel: [ 616.653936] sr 0:0:4:0: [sr0] unaligned transfer
Jan 24 00:37:17 kernel: [ 616.654004] sr 0:0:4:0: [sr0] unaligned transfer
Jan 24 00:37:17 kernel: [ 616.654072] sr 0:0:4:0: [sr0] unaligned transfer
Jan 24 00:37:17 kernel: [ 616.654141] sr 0:0:4:0: [sr0] unaligned transfer
...
Jan 24 00:37:20 cdrom-detect: Devices: '/dev/sr0'
Jan 24 00:37:20 kernel: [ 619.937652] sr 0:0:4:0: [sr0] unaligned transfer
Jan 24 00:37:20 kernel: [ 619.937735] isofs_fill_super: bread failed, dev=sr0, iso_blknum=16, block=32
Jan 24 00:37:20 cdrom-detect: CD-ROM mount failed: device=/dev/sr0 fstype=iso9660
Jan 24 00:37:53 kernel: [ 652.560804] sr 0:0:4:0: [sr0] unaligned transfer
Jan 24 00:37:53 kernel: [ 652.560880] isofs_fill_super: bread failed, dev=sr0, iso_blknum=16, block=32
Jan 24 00:37:53 cdrom-detect: CD-ROM mount failed: device=/dev/cdrom fstype=iso9660
Jan 24 00:37:53 cdrom-detect: CDROM-detect failed; unmounting CD just to be sure
Jan 24 00:37:53 main-menu[202]: (process:695): mount: mounting /dev/sr0 on /cdrom failed: Invalid argument
Jan 24 00:37:53 main-menu[202]: (process:695): mount: mounting /dev/cdrom on /cdrom failed: Invalid argument
Jan 24 00:37:53 main-menu[202]: WARNING **: Configuring 'cdrom-detect' failed with error code 1
Jan 24 00:37:53 main-menu[202]: WARNING **: Menu item 'cdrom-detect' failed.
Jan 24 00:37:55 main-menu[202]: INFO: Modifying debconf priority limit from 'high' to 'medium'
Jan 24 00:37:55 debconf: Setting debconf/priority to medium
Jan 24 00:37:55 main-menu[202]: DEBUG: resolver (libc6-udeb): package doesn't exist (ignored)
Jan 24 00:37:55 main-menu[202]: INFO: Falling back to the package description for brltty-udeb
Jan 24 00:38:02 main-menu[202]: INFO: Falling back to the package description for brltty-udeb
Jan 24 00:38:02 main-menu[202]: INFO: Menu item 'di-utils-shell' selected
Jan 24 00:39:56 kernel: [ 776.070956] sr 0:0:4:0: [sr0] unaligned transfer
Jan 24 00:39:56 kernel: [ 776.071035] isofs_fill_super: bread failed, dev=sr0, iso_blknum=16, block=32
Jan 24 00:40:10 kernel: [ 789.383147] sr 0:0:4:0: [sr0] unaligned transfer
Jan 24 00:40:10 kernel: [ 789.383212] isofs_fill_super: bread failed, dev=sr0, iso_blknum=16, block=32
And basically the same on the ultra-2 (after manually inserting the sun_esp
scsi driver):
Jan 13 20:15:00 kernel: [ 373.362249] SCSI subsystem initialized
Jan 13 20:15:00 kernel: [ 373.392158] esp f006c20c: esp0: regs[1ffe8810000:1ffe8800000] irq[10]
Jan 13 20:15:00 kernel: [ 373.392196] esp f006c20c: esp0: is a FASHME, 40 MHz (ccf=0), SCSI ID 7
Jan 13 20:15:03 kernel: [ 376.394242] scsi host0: esp
Jan 13 20:15:03 kernel: [ 376.414454] scsi 0:0:0:0: Direct-Access SEAGATE ST34371W SUN4.2G 7462 PQ: 0 ANSI: 2
Jan 13 20:15:03 kernel: [ 376.414524] scsi target0:0:0: Beginning Domain Validation
Jan 13 20:15:03 kernel: [ 376.439792] scsi target0:0:0: FAST-10 WIDE SCSI 20.0 MB/s ST (100 ns, offset 15)
Jan 13 20:15:03 kernel: [ 376.449919] scsi target0:0:0: Domain Validation skipping write tests
Jan 13 20:15:03 kernel: [ 376.449949] scsi target0:0:0: Ending Domain Validation
Jan 13 20:15:03 kernel: [ 376.469484] scsi 0:0:1:0: Direct-Access SEAGATE ST34371W SUN4.2G 7462 PQ: 0 ANSI: 2
Jan 13 20:15:03 kernel: [ 376.469546] scsi target0:0:1: Beginning Domain Validation
Jan 13 20:15:03 kernel: [ 376.494057] scsi target0:0:1: FAST-10 WIDE SCSI 20.0 MB/s ST (100 ns, offset 15)
Jan 13 20:15:03 kernel: [ 376.503839] scsi target0:0:1: Domain Validation skipping write tests
Jan 13 20:15:03 kernel: [ 376.503867] scsi target0:0:1: Ending Domain Validation
Jan 13 20:15:04 kernel: [ 377.454823] scsi 0:0:6:0: CD-ROM PLEXTOR CD-ROM PX-20TS 1.01 PQ: 0 ANSI: 2
Jan 13 20:15:04 kernel: [ 377.454884] scsi target0:0:6: Beginning Domain Validation
Jan 13 20:15:04 kernel: [ 377.457541] scsi target0:0:6: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 15)
Jan 13 20:15:04 kernel: [ 377.459584] scsi target0:0:6: Domain Validation skipping write tests
Jan 13 20:15:04 kernel: [ 377.459612] scsi target0:0:6: Ending Domain Validation
Jan 13 20:15:06 kernel: [ 379.383207] sd 0:0:0:0: [sda] 8385121 512-byte logical blocks: (4.29 GB/3.99 GiB)
Jan 13 20:15:06 kernel: [ 379.385631] sd 0:0:1:0: [sdb] 8385121 512-byte logical blocks: (4.29 GB/3.99 GiB)
Jan 13 20:15:06 kernel: [ 379.388407] sd 0:0:0:0: [sda] Write Protect is off
Jan 13 20:15:06 kernel: [ 379.388445] sd 0:0:0:0: [sda] Mode Sense: cf 00 10 08
Jan 13 20:15:06 kernel: [ 379.391220] sd 0:0:1:0: [sdb] Write Protect is off
Jan 13 20:15:06 kernel: [ 379.391257] sd 0:0:1:0: [sdb] Mode Sense: cf 00 10 08
Jan 13 20:15:06 kernel: [ 379.394281] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA
Jan 13 20:15:06 kernel: [ 379.396877] sd 0:0:1:0: [sdb] Write cache: disabled, read cache: enabled, supports DPO and FUA
Jan 13 20:15:06 kernel: [ 379.400356] sr 0:0:6:0: [sr0] out of memory.
Jan 13 20:15:06 kernel: [ 379.400384] cdrom: Uniform CD-ROM driver Revision: 3.20
Jan 13 20:15:06 kernel: [ 379.408597] sr 0:0:6:0: Attached scsi CD-ROM sr0
Jan 13 20:15:06 kernel: [ 379.454952] sdb: sdb1 sdb2 sdb3
Jan 13 20:15:06 kernel: [ 379.495565] sd 0:0:1:0: [sdb] Attached SCSI disk
Jan 13 20:15:06 kernel: [ 379.538033] sda: sda1 sda2 sda3 sda4
Jan 13 20:15:06 kernel: [ 379.565553] sd 0:0:0:0: [sda] Attached SCSI disk
~ # ls /dev/sr*
/dev/sr0
~ # mount -r -t iso9660 /dev/sr0 /cdrom/
mount: mounting /dev/sr0 on /cdrom/ failed: Invalid argument
~ # tail /var/log/syslog
Jan 13 20:15:06 kernel: [ 379.396877] sd 0:0:1:0: [sdb] Write cache: disabled, read cache: enabled, supports DPO and FUA
Jan 13 20:15:06 kernel: [ 379.400356] sr 0:0:6:0: [sr0] out of memory.
Jan 13 20:15:06 kernel: [ 379.400384] cdrom: Uniform CD-ROM driver Revision: 3.20
Jan 13 20:15:06 kernel: [ 379.408597] sr 0:0:6:0: Attached scsi CD-ROM sr0
Jan 13 20:15:06 kernel: [ 379.454952] sdb: sdb1 sdb2 sdb3
Jan 13 20:15:06 kernel: [ 379.495565] sd 0:0:1:0: [sdb] Attached SCSI disk
Jan 13 20:15:06 kernel: [ 379.538033] sda: sda1 sda2 sda3 sda4
Jan 13 20:15:06 kernel: [ 379.565553] sd 0:0:0:0: [sda] Attached SCSI disk
Jan 13 20:16:07 kernel: [ 441.203384] sr 0:0:6:0: [sr0] unaligned transfer
Jan 13 20:16:07 kernel: [ 441.203519] isofs_fill_super: bread failed, dev=sr0, iso_blknum=16, block=32
I get the same problem when trying to mount the cdrom from the new running
installation:
Debian GNU/Linux stretch/sid ceteol ttyS0
[ 150.366025] sr 0:0:6:0: [sr0] unaligned transfer
[ 150.422207] isofs_fill_super: bread failed, dev=sr0, iso_blknum=16, block=32
But with the old 2.6.18 kernel of my old installation on the same hardware
I can mount the CD (in the same drive):
ceteol:~> uname -a
Linux ceteol 2.6.18-4-sparc64-smp #1 SMP Tue May 1 22:54:26 UTC 2007 sparc64 GNU/Linux
ceteol:~> su
Password:
ceteol:/home/ut# mount -r -t iso9660 /dev/sr0 /cdrom/
ceteol:/home/ut# ls /cdrom
README.html README.mirrors.txt boot debian install pics
README.mirrors.html README.txt css dists md5sum.txt pool
HTH,
Uli
--
Dipl. Inf. Ulrich Teichert|e-mail: Ulrich.Teichert@gmx.de | Listening to:
Stormweg 24 |Imperial State Electric, The Estranged,
24539 Neumuenster, Germany|The About Blanks, Cyanide Pills, Fu Manchu.
Reply to: