Re: Kernel panic 4.7.0-rc4-sparc64-smp on systemd-udevd
On Fri, 2016-07-01 at 17:28 +0200, John Paul Adrian Glaubitz wrote:
> > > A 3.4 kernel actually shouldn't work with a current sparc64
> > > chroot since 3.4 is too old for any recent versions of udev.
> > Sorry the 3.4 kernel is not the problem, I am talking about at all.
> And I am telling you that a current version of udev requires a kernel
> that is not too old, see:
> >
> > https://wiki.gentoo.org/wiki/Udev/Upgrade_Guide#udev_216_to_217
> You should not be running on such an old kernel. Use at least 3.16.7.
Okay today is a other day, sorry :-)
I extracted linux-image 3.16.7-ckt25-2~bpo70+1 (sparc) and copied the
file by myself. Generated a initramfs. And it boots without any error.
Attaching dmesg-sparc64-jul-9-2016.txt.
I do not have CDs laying around. But i can test booting a fresh copy by
usb. With the installer kernel file from /boot, true.
[ 0.000000] PROMLIB: Sun IEEE Boot Prom 'OBP 4.16.4 2004/12/18 05:18'
[ 0.000000] PROMLIB: Root node compatible:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16.0-0.bpo.4-sparc64-smp (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.16.7-ckt25-2~bpo70+1 (2016-04-12)
[ 0.000000] bootconsole [earlyprom0] enabled
[ 0.000000] ARCH: SUN4U
[ 0.000000] Ethernet address: 00:03:ba:09:92:39
[ 0.000000] MM: PAGE_OFFSET is 0xfff0000000000000 (max_phys_bits == 42)
[ 0.000000] MM: VMALLOC [0x0000000100000000 --> 0x000c000000000000]
[ 0.000000] MM: VMEMMAP [0x000c000000000000 --> 0x0018000000000000]
[ 0.000000] Kernel: Using 3 locked TLB entries for main kernel image.
[ 0.000000] Remapping the kernel... done.
[ 0.000000] OF stdout device is: /upa@8,480000/SUNW,ffb@0,0
[ 0.000000] PROM: Built device tree with 111984 bytes of memory.
[ 0.000000] Top of RAM: 0x7fdda000, Total RAM: 0x7fdc8000
[ 0.000000] Memory hole size: 0MB
[ 0.000000] Allocated 16384 bytes for kernel page tables.
[ 0.000000] Zone ranges:
[ 0.000000] DMA empty
[ 0.000000] Normal [mem 0x00000000-0x7fdd9fff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00000000-0x7effdfff]
[ 0.000000] node 0: [mem 0x7f000000-0x7fdabfff]
[ 0.000000] node 0: [mem 0x7fdbc000-0x7fdd9fff]
[ 0.000000] On node 0 totalpages: 261860
[ 0.000000] Normal zone: 2046 pages used for memmap
[ 0.000000] Normal zone: 261860 pages, LIFO batch:15
[ 0.000000] Booting Linux...
[ 0.000000] CPU CAPS: [flush,stbar,swap,muldiv,v9,ultra3,mul32,div32]
[ 0.000000] CPU CAPS: [v8plus,vis,vis2]
[ 0.000000] PERCPU: Embedded 7 pages/cpu @fff000007f800000 s22656 r8192 d26496 u2097152
[ 0.000000] pcpu-alloc: s22656 r8192 d26496 u2097152 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259814
[ 0.000000] Kernel command line: root=/dev/sda5 ro
[ 0.000000] PID hash table entries: 4096 (order: 2, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 262144 (order: 8, 2097152 bytes)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 7, 1048576 bytes)
[ 0.000000] Sorting __ex_table...
[ 0.000000] Memory: 2050328K/2094880K available (4999K kernel code, 657K rwdata, 1376K rodata, 440K init, 873K bss, 44552K reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:2048 nr_irqs:2048 1
[ 56.609794] clocksource: mult[c8000000] shift[24]
[ 56.626459] clockevent: mult[147ae14] shift[32]
[ 56.643049] Console: colour dummy device 80x25
[ 56.659045] console [tty0] enabled
[ 56.672707] bootconsole [earlyprom0] disabled
[ 56.768514] Calibrating delay using timer specific routine.. 10.01 BogoMIPS (lpj=20036)
[ 56.768544] pid_max: default: 32768 minimum: 301
[ 56.768736] Security Framework initialized
[ 56.768813] AppArmor: AppArmor disabled by boot time parameter
[ 56.768832] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 56.768929] Mount-cache hash table entries: 4096 (order: 2, 32768 bytes)
[ 56.768953] Mountpoint-cache hash table entries: 4096 (order: 2, 32768 bytes)
[ 56.770562] Initializing cgroup subsys memory
[ 56.770606] Initializing cgroup subsys devices
[ 56.770665] Initializing cgroup subsys freezer
[ 56.770691] Initializing cgroup subsys net_cls
[ 56.770740] Initializing cgroup subsys blkio
[ 56.770778] Initializing cgroup subsys perf_event
[ 56.770799] Initializing cgroup subsys net_prio
[ 56.770891] ftrace: allocating 17175 entries in 34 pages
[ 56.811522] CPU 1: synchronized TICK with master CPU (last diff 0 cycles, maxerr 5 cycles)
[ 56.811591] Brought up 2 CPUs
[ 56.812631] devtmpfs: initialized
[ 56.813316] Performance events:
[ 56.813343] Testing NMI watchdog ...
[ 56.893362] OK.
[ 56.893374] Supported PMU type is 'ultra3'
[ 56.928547] NET: Registered protocol family 16
[ 56.940825] /pci@8,700000: SCHIZO PCI Bus Module ver[4:0]
[ 56.940858] /pci@8,700000: PCI IO[7ffef000000] MEM[7fe00000000]
[ 56.945287] PCI: Scanning PBM /pci@8,700000
[ 56.945553] schizo f0061680: PCI host bridge to bus 0000:00
[ 56.945589] pci_bus 0000:00: root bus resource [io 0x7ffef000000-0x7ffefffffff] (bus address [0x0000-0xffffff])
[ 56.945625] pci_bus 0000:00: root bus resource [mem 0x7fe00000000-0x7feffffffff] (bus address [0x00000000-0xffffffff])
[ 56.945707] pci_bus 0000:00: root bus resource [bus 00]
[ 56.947352] pci 0000:00:06.0: supports D1 D2
[ 56.947663] pci 0000:00:06.1: supports D1 D2
[ 56.948352] /pci@8,600000: SCHIZO PCI Bus Module ver[4:0]
[ 56.948382] /pci@8,600000: PCI IO[7ffed000000] MEM[7fd00000000]
[ 56.952811] PCI: Scanning PBM /pci@8,600000
[ 56.953078] schizo f006a214: PCI host bridge to bus 0001:00
[ 56.953110] pci_bus 0001:00: root bus resource [io 0x7ffed000000-0x7ffedffffff] (bus address [0x0000-0xffffff])
[ 56.953146] pci_bus 0001:00: root bus resource [mem 0x7fd00000000-0x7fdffffffff] (bus address [0x00000000-0xffffffff])
[ 56.953178] pci_bus 0001:00: root bus resource [bus 00]
[ 56.964658] vgaarb: loaded
[ 56.966038] /pci@8,700000/ebus@5/rtc@1,300070: RTC regs at 0x7fe7e300070
[ 56.967200] Switched to clocksource stick
[ 57.025548] NET: Registered protocol family 2
[ 57.026902] TCP established hash table entries: 16384 (order: 4, 131072 bytes)
[ 57.027401] TCP bind hash table entries: 16384 (order: 5, 262144 bytes)
[ 57.028279] TCP: Hash tables configured (established 16384 bind 16384)
[ 57.028771] TCP: reno registered
[ 57.028796] UDP hash table entries: 1024 (order: 2, 32768 bytes)
[ 57.028927] UDP-Lite hash table entries: 1024 (order: 2, 32768 bytes)
[ 57.029378] NET: Registered protocol family 1
[ 57.083262] PCI: CLS 64 bytes, default 64
[ 57.083582] Unpacking initramfs...
[ 58.378356] Freeing initrd memory: 16144K (fff0000004400000 - fff00000053c4000)
[ 58.379384] chmc: UltraSPARC-III memory controller at /memory-controller@0,400000 [ACTIVE]
[ 58.379474] chmc: UltraSPARC-III memory controller at /memory-controller@1,400000 [ACTIVE]
[ 58.380840] futex hash table entries: 512 (order: 2, 32768 bytes)
[ 58.381053] audit: initializing netlink subsys (disabled)
[ 58.381226] audit: type=2000 audit(1.696:1): initialized
[ 58.382854] HugeTLB registered 8 MB page size, pre-allocated 0 pages
[ 58.382953] zbud: loaded
[ 58.383898] VFS: Disk quotas dquot_6.5.2
[ 58.384002] Dquot-cache hash table entries: 1024 (order 0, 8192 bytes)
[ 58.384290] msgmni has been set to 4036
[ 58.386261] alg: No test for stdrng (krng)
[ 58.386437] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 58.386701] io scheduler noop registered
[ 58.386731] io scheduler deadline registered
[ 58.386935] io scheduler cfq registered (default)
[ 58.387946] fbcon: Creator 3D (fb0) is primary device
[ 58.396036] Console: switching to colour frame buffer device 160x64
[ 58.403874] /upa@8,480000/SUNW,ffb@0,0: FFB at 000007f800000000, type 51, DAC pnum[236e] rev[10] manuf_rev[1]
[ 58.405471] f0083ea0: ttyS0 at MMIO 0x7fe7e400000 (irq = 12, base_baud = 115200) is a SAB82532 V3.2
[ 58.405929] f0083ea0: ttyS1 at MMIO 0x7fe7e400040 (irq = 12, base_baud = 115200) is a SAB82532 V3.2
[ 58.407288] mousedev: PS/2 mouse device common for all mice
[ 58.408614] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 58.408706] rtc_cmos rtc_cmos: no alarms, 114 bytes nvram
[ 58.409064] ledtrig-cpu: registered to indicate activity on CPUs
[ 58.409374] TCP: cubic registered
[ 58.409562] NET: Registered protocol family 10
[ 58.410747] mip6: Mobile IPv6
[ 58.410806] NET: Registered protocol family 17
[ 58.410886] mpls_gso: MPLS GSO support
[ 58.411695] registered taskstats version 1
[ 58.412989] rtc_cmos rtc_cmos: setting system clock to 2016-07-09 08:10:10 UTC (1468051810)
[ 58.413106] PM: Hibernation image not present or could not be loaded.
[ 58.497738] random: systemd-udevd urandom read with 0 bits of entropy available
[ 58.724978] sungem.c:v1.0 David S. Miller <davem@redhat.com>
[ 58.726064] gem 0000:00:05.1 eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:03:ba:09:92:39
[ 58.735020] usbcore: registered new interface driver usbfs
[ 58.735158] usbcore: registered new interface driver hub
[ 58.735413] usbcore: registered new device driver usb
[ 58.743415] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 58.746459] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 58.747520] ehci-pci: EHCI PCI platform driver
[ 58.748420] ohci-pci: OHCI PCI platform driver
[ 58.748556] SCSI subsystem initialized
[ 58.783307] firewire_ohci 0000:00:05.2: added OHCI v1.0 device as card 0, 4 IR + 4 IT contexts, quirks 0x0
[ 58.783984] ohci-pci 0000:00:05.3: OHCI PCI host controller
[ 58.784086] ohci-pci 0000:00:05.3: new USB bus registered, assigned bus number 1
[ 58.784293] ohci-pci 0000:00:05.3: irq 15, io mem 0x7fe01000000
[ 58.790425] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.08-k.
[ 58.790631] PCI: Enabling device: (0001:00:04.0), cmd 3
[ 58.790728] qla2xxx [0001:00:04.0]-001d: : Found an ISP2200 irq 20 iobase 0x000007fd00100000.
[ 58.792508] qla2xxx [0001:00:04.0]-0050:0: No matching ROM signature.
[ 58.844033] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 58.844126] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 58.844210] usb usb1: Product: OHCI PCI host controller
[ 58.844273] usb usb1: Manufacturer: Linux 3.16.0-0.bpo.4-sparc64-smp ohci_hcd
[ 58.847244] usb usb1: SerialNumber: 0000:00:05.3
[ 58.864493] hub 1-0:1.0: USB hub found
[ 58.875213] hub 1-0:1.0: 4 ports detected
[ 58.886906] qla2xxx [0001:00:04.0]-0064:0: Inconsistent NVRAM detected: checksum=0x0 id=
[ 58.889233] PCI: Enabling device: (0000:00:06.0), cmd 147
[ 58.889959] qla2xxx [0001:00:04.0]-0065:0: Falling back to functioning (yet invalid -- WWPN) defaults.
[ 58.890409] sym0: <875> rev 0x37 at pci 0000:00:06.0 irq 16
[ 58.895901] qla2xxx [0001:00:04.0]-0069:0: NVRAM configuration failed.
[ 58.911709] qla2xxx 0001:00:04.0: firmware: direct-loading firmware ql2200_fw.bin
[ 58.985621] sym0: No NVRAM, ID 7, Fast-20, SE, parity checking
[ 58.995808] sym0: SCSI BUS has been reset.
[ 58.998640] scsi1 : sym-2.2.3
[ 59.002166] PCI: Enabling device: (0000:00:06.1), cmd 147
[ 59.003360] sym1: <875> rev 0x37 at pci 0000:00:06.1 irq 17
[ 59.093444] sym1: No NVRAM, ID 7, Fast-20, SE, parity checking
[ 59.103639] sym1: SCSI BUS has been reset.
[ 59.106447] scsi2 : sym-2.2.3
[ 59.283227] usb 1-1: new low-speed USB device number 2 using ohci-pci
[ 59.287622] firewire_core 0000:00:05.2: created device fw0: GUID 0003bafffe099239, S400
[ 59.489539] usb 1-1: New USB device found, idVendor=0430, idProduct=0005
[ 59.492512] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 59.507707] hidraw: raw HID events driver (C) Jiri Kosina
[ 59.520996] usbcore: registered new interface driver usbhid
[ 59.523939] usbhid: USB HID core driver
[ 59.531278] input: HID 0430:0005 as /devices/root/f0061680/pci0000:00/0000:00:05.3/usb1/1-1/1-1:1.0/0003:0430:0005.0001/input/input0
[ 59.534579] hid-generic 0003:0430:0005.0001: input,hidraw0: USB HID v1.00 Keyboard [HID 0430:0005] on usb-0000:00:05.3-1/input0
[ 69.695394] scsi0 : qla2xxx
[ 69.700087] qla2xxx [0001:00:04.0]-00fb:0: QLogic QLA22xx - .
[ 69.703176] qla2xxx [0001:00:04.0]-00fc:0: ISP2200: PCI (66 MHz) @ 0001:00:04.0 hdma- host#=0 fw=2.02.08 TP.
[ 70.244468] scsi 0:0:0:0: Direct-Access SEAGATE ST373307FSUN72G 0207 PQ: 0 ANSI: 3
[ 70.252898] scsi 0:0:1:0: Direct-Access FUJITSU MAP3735F SUN72G 1201 PQ: 0 ANSI: 4
[ 74.726434] sd 0:0:0:0: [sda] 143374738 512-byte logical blocks: (73.4 GB/68.3 GiB)
[ 74.729661] sd 0:0:1:0: [sdb] 143374738 512-byte logical blocks: (73.4 GB/68.3 GiB)
[ 74.735067] sd 0:0:0:0: [sda] Write Protect is off
[ 74.737000] sd 0:0:1:0: [sdb] Write Protect is off
[ 74.737011] sd 0:0:1:0: [sdb] Mode Sense: bb 00 00 08
[ 74.741047] sd 0:0:1:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 74.744388] sd 0:0:0:0: [sda] Mode Sense: db 00 10 08
[ 74.748375] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA
[ 74.761034] sdb: sdb1 sdb2 sdb3 sdb4 sdb5
[ 74.773118] sda: sda1 sda2 sda3 sda4 sda5
[ 74.780328] sd 0:0:1:0: [sdb] Attached SCSI disk
[ 74.788005] sd 0:0:0:0: [sda] Attached SCSI disk
[ 75.291416] random: nonblocking pool is initialized
[ 75.493673] PM: Starting manual resume from disk
[ 75.496767] PM: Hibernation image partition 8:2 present
[ 75.496778] PM: Looking for hibernation image.
[ 75.504119] PM: Image not found (code -22)
[ 75.504131] PM: Hibernation image not present or could not be loaded.
[ 76.039672] EXT4-fs (sda5): mounting ext3 file system using the ext4 subsystem
[ 76.063491] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 77.159145] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[ 77.166010] systemd[1]: Detected architecture sparc64.
[ 77.221903] systemd[1]: Set hostname to <deblnxsrv230>.
[ 78.288940] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 78.296531] systemd[1]: Listening on Journal Socket (/dev/log).
[ 78.303760] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 78.311073] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 78.318419] systemd[1]: Listening on RPCbind Server Activation Socket.
[ 78.326160] systemd[1]: Created slice System Slice.
[ 78.333714] systemd[1]: Created slice system-getty.slice.
[ 78.341279] systemd[1]: Created slice User and Session Slice.
[ 78.348500] systemd[1]: Reached target Slices.
[ 78.355734] systemd[1]: Reached target Paths.
[ 78.362952] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 78.370180] systemd[1]: Reached target Encrypted Volumes.
[ 78.377707] systemd[1]: Listening on Journal Audit Socket.
[ 78.385174] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 78.392211] systemd[1]: Listening on udev Kernel Socket.
[ 78.399286] systemd[1]: Listening on Journal Socket.
[ 78.421973] systemd[1]: Starting Load Kernel Modules...
[ 78.431940] systemd[1]: Mounting POSIX Message Queue File System...
[ 78.441683] systemd[1]: Mounting RPC Pipe File System...
[ 78.451545] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 78.461672] systemd[1]: Starting Journal Service...
[ 78.472019] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 78.485405] loop: module loaded
[ 78.499165] systemd[1]: Mounting Huge Pages File System...
[ 78.509667] systemd[1]: Mounting Debug File System...
[ 78.517069] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 78.524555] systemd[1]: Listening on udev Control Socket.
[ 78.551798] systemd[1]: Mounted Huge Pages File System.
[ 78.559040] systemd[1]: Mounted POSIX Message Queue File System.
[ 78.569550] systemd[1]: Mounted Debug File System.
[ 78.603936] systemd[1]: Started Load Kernel Modules.
[ 78.614783] systemd[1]: Starting Apply Kernel Variables...
[ 78.701330] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[ 78.716666] systemd[1]: Started Remount Root and Kernel File Systems.
[ 78.753623] systemd[1]: Started Apply Kernel Variables.
[ 78.777258] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 78.828566] RPC: Registered named UNIX socket transport module.
[ 78.831836] RPC: Registered udp transport module.
[ 78.834949] RPC: Registered tcp transport module.
[ 78.835078] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 78.841229] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 78.852571] systemd[1]: Starting Load/Save Random Seed...
[ 78.945712] systemd[1]: Starting udev Coldplug all Devices...
[ 78.960072] systemd[1]: Mounted RPC Pipe File System.
[ 79.013479] systemd[1]: Started Journal Service.
[ 79.236421] systemd-journald[141]: Received request to flush runtime journal from PID 1
[ 79.364905] fuse init (API version 7.23)
[ 79.403085] xor: automatically using best checksumming function:
[ 79.443225] VIS : 152.000 MB/sec
[ 79.519209] raid6: int64x1 712 MB/s
[ 79.587254] raid6: int64x2 948 MB/s
[ 79.655285] raid6: int64x4 786 MB/s
[ 79.723236] raid6: int64x8 430 MB/s
[ 79.726155] raid6: using algorithm int64x2 (948 MB/s)
[ 79.729179] raid6: using intx1 recovery algorithm
[ 79.816556] crc32c_sparc64: sparc64 crc32c opcode not available.
[ 79.839115] Btrfs loaded
[ 79.873649] tun: Universal TUN/TAP device driver, 1.6
[ 79.876550] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 79.910236] PPP generic driver version 2.4.2
[ 79.950397] device-mapper: uevent: version 1.0.3
[ 79.953576] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 80.467383] i2c-0: Regs at 000007fe7e00002e, 8 devices, own a0, clock 10.
[ 80.473708] i2c-0: Regs at 000007fe7e000030, 8 devices, own a0, clock 10.
[ 80.541269] bbc_envctrl: kenvctrld starting...
[ 80.813357] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 80.819172] sd 0:0:1:0: Attached scsi generic sg1 type 0
[ 81.953429] Adding 1269120k swap on /dev/sda2. Priority:-1 extents:1 across:1269120k FS
[ 82.013502] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[ 82.026046] EXT4-fs (sda1): warning: maximal mount count reached, running e2fsck is recommended
[ 82.031902] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[ 82.419592] EXT4-fs (sda4): mounting ext3 file system using the ext4 subsystem
[ 82.462035] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 82.916690] sungem_phy: PHY ID: 18074c1, addr: 0
[ 82.916719] gem 0000:00:05.1 enp0s5f1: Found Generic MII PHY
[ 82.920210] IPv6: ADDRCONF(NETDEV_UP): enp0s5f1: link is not ready
[ 85.327442] gem 0000:00:05.1 enp0s5f1: Link is up at 100 Mbps, full-duplex
[ 85.330227] gem 0000:00:05.1 enp0s5f1: Pause is disabled
[ 85.335177] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s5f1: link becomes ready
[ 827.266641] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[ 827.284856] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[ 827.295582] EXT4-fs (sda4): mounting ext3 file system using the ext4 subsystem
[ 827.331426] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
Reply to: