Re: console [tty0] enabled, bootconsole disabled while booting from disk after complete installation
Hi.
> Dear team,
>
>
> Im using serial console only,no monitor ,no keyboard are connected to it.
> After giving console=ttyS0 in boot command it is working fine but still
> getting problem as shown below..
Ok, no ALT-F2 :-(
> Rebooting with command: boot disk /boot/vmlinuz root=/dev/sda2
> console=ttyS0
> Boot device: /pci@8,600000/SUNW,qlc@2/fp@0,0/disk@0,0 File and args:
> /boot/vmlinuz root=/dev/sda2 console=ttyS0 video=atyfb:off fb=false
> SILO Version 1.4.14
Ok, SILO is installed successfully - but that does not mean that
configuration is ok (silo.conf).
> Allocated 64 Megs of memory at 0x40000000 for kernel
> Uncompressing image...
> Loaded kernel version 3.2.57
Linux kernel starts ...
> [ 0.000000] Linux version 3.2.0-4-sparc64-smp (
> debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1
> SMP Debian 3.2.57-3
...
> [ 34.768002] NET: Registered protocol family 16
> [ 34.824694] /pci@8,700000: SCHIZO PCI Bus Module ver[7:0]
> [ 34.887463] /pci@8,700000: PCI IO[7ffef000000] MEM[7fe00000000]
> [ 34.961945] PCI: Scanning PBM /pci@8,700000
> [ 35.010617] /pci@8,600000: SCHIZO PCI Bus Module ver[7:0]
> [ 35.074758] /pci@8,600000: PCI IO[7ffed000000] MEM[7fd00000000]
> [ 35.149239] PCI: Scanning PBM /pci@8,600000
> [ 35.197703] /pci@8,600000: PCI Error, primary error type[Master Abort]
> [ 35.197740] /pci@9,700000: SCHIZO PCI Bus Module ver[7:0]
> [ 35.197747] /pci@9,700000: PCI IO[7ffeb000000] MEM[7fc00000000]
> [ 35.201434] PCI: Scanning PBM /pci@9,700000
> [ 35.202596] /pci@9,600000: SCHIZO PCI Bus Module ver[7:0]
> [ 35.202604] /pci@9,600000: PCI IO[7ffe9000000] MEM[7fb00000000]
> [ 35.206292] PCI: Scanning PBM /pci@9,600000
> [ 35.646434] /pci@8,600000: bytemask[0003] was_block(0) space(Memory)
> [ 35.722477] /pci@8,600000: PCI AFAR [00000000004000c0]
> [ 35.783936] /pci@8,600000: PCI Secondary errors [(Master Abort)]
> [ 35.855832] Unable to handle kernel NULL pointer dereference
> [ 35.923522] tsk->{mm,active_mm}->context = 0000000000000000
> [ 35.990191] tsk->{mm,active_mm}->pgd = fffff8a000961690
> [ 36.052694] \|/ ____ \|/
> [ 36.052696] "@'/ .. \`@"
> [ 36.052698] /_| \__/ |_\
> [ 36.052699] \__U_/
> [ 36.228741] swapper/0(0): Oops [#1]
Well, I don't know the V890. Obviously you have PCI Bus problems before the
kernel crashes. Do you have any (unusual) extension boards in your PCI slots?
What happens when you remove them?
Regards,
Hartwig
Reply to: