Re: booting on t1000
On 6/10/2013 11:49 PM, Jeremy Kister wrote:
the system will just sit there seemingly forever if i do not press
<enter> or enter Linux<enter>
in OBP:
# ok setenv boot-command boot Linux
makes the system boot correctly on cold boot:
#####
Sun Fire(TM) T1000, No Keyboard
Copyright 2006 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.25.0, 8184 MB memory available, Serial #77559514.
Ethernet address 0:14:4f:9f:76:da, Host ID: 849f76da.
Boot device: /pci@7c0/pci@0/pci@8/scsi@2/disk@0,0:3 File and args: Linux
SILO Version 1.4.14
Allocated 64 Megs of memory at 0x40000000 for kernel
[...]
######
when i 'reboot' from the system though, i still run into the "boot:
boot:" issue:
######
Sun Fire(TM) T1000, No Keyboard
Copyright 2006 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.25.0, 8184 MB memory available, Serial #77559514.
Ethernet address 0:14:4f:9f:76:da, Host ID: 849f76da.
Rebooting with command: boot
Boot device: disk0 File and args:
SILO Version 1.4.14
boot: boot:
######
no one else running Debian on t1000 ?
--
Jeremy Kister
http://jeremy.kister.net./
Reply to: