Re: Sun Blade 2500 + XVR-1200
Hi Jurij,
Am Sonntag, den 28.08.2011, 15:26 +0100 schrieb Jurij Smakov:
> > I'm not certain what the XVR-1000 card actually is, but if you have a
> > working X environment with it, please post your xorg.conf and the
> > output of lsmod.
There is no xorg.conf! I have to dump one with X -configure, but can't
do it while writing this email with evolution.
> Output of 'prtconf -pv | grep screen:' would be useful as well. On my
> system this prints:
>
> screen: '/pci@8,700000/SUNW,Expert3D-Lite@3'
dirk@u60:/etc$ sudo prtconf -pv|grep screen
output-device: 'screen'
screen-#columns: '80'
screen-#rows: '34'
screen: '/SUNW,gfb@1e,0'
dirk@u60:/etc$ sudo prtconf -pv
....
....
version: '@(#) gfb.fth 1.15 02/01/28 '
device-name: 'Sun XVR-1000 Graphics Accelerator, model D256'
sunw,lpm-ranges:
00000019.00000019.0000001e.00000021.00000023.00000033.00000028.0000003f
device_type: 'display'
model: 'SUNW,501-5865'
name: 'SUNW,gfb'
dirk@u60:/etc$ lsmod
Module Size Used by
parport_pc 24091 1
lp 8776 0
parport 26139 2 parport_pc,lp
cpufreq_conservative 5209 0
cpufreq_powersave 934 0
cpufreq_stats 2672 0
cpufreq_ondemand 5948 0
freq_table 2634 2 cpufreq_stats,cpufreq_ondemand
cpufreq_userspace 2216 0
binfmt_misc 6742 1
fuse 55781 1
ext2 65360 1
loop 12674 0
snd_sun_cs4231 17694 2
snd_pcm 65512 1 snd_sun_cs4231
snd_seq 45382 0
snd_timer 16868 3 snd_sun_cs4231,snd_pcm,snd_seq
snd_seq_device 4789 1 snd_seq
snd 49151 9
snd_sun_cs4231,snd_pcm,snd_seq,snd_timer,snd_seq_device
evdev 8806 3
flash 2923 0
soundcore 5087 1 snd
snd_page_alloc 5029 2 snd_sun_cs4231,snd_pcm
ext3 127391 1
jbd 38708 1 ext3
mbcache 5363 2 ext2,ext3
sg 19937 0
sr_mod 13512 0
sd_mod 32208 4
cdrom 33943 1 sr_mod
crc_t10dif 1324 1 sd_mod
usb_storage 42519 0
uas 6999 0
ohci_hcd 17880 0
sym53c8xx 70544 3
ehci_hcd 34497 0
scsi_transport_spi 20291 1 sym53c8xx
usbcore 116424 5 usb_storage,uas,ohci_hcd,ehci_hcd
scsi_mod 165180 7
sg,sr_mod,sd_mod,usb_storage,uas,sym53c8xx,scsi_transport_spi
sunhme 25644 0
dirk@u60:/etc$
> And as far as I know, Expert3D cards are not supported, but I'm going
> to try it with the newer kernel now.
dirk@u60:/etc$ dmesg
.........
.........
[ 0.000000] Linux version 2.6.39-bpo.2-sparc64-smp (Debian
2.6.39-3~bpo60+1) (norbert@tretkowski.de) (gcc version 4.4.5 (Debian
4.4.5-8) ) #1 SMP Thu Aug 4 13:03:02 UTC 2011
..........
..........
[ 0.000000] OF stdout device is: /SUNW,gfb@1e,0
..........
..........
[ 84.316454] gfb: Found device at /SUNW,gfb@1e,0
[ 84.316662] fbcon: gfb (fb0) is primary device
[ 84.362581] Console: switching to colour frame buffer device 160x64
..........
..........
Regards
Dirk
Reply to: