kernel panic

[Sean Whitney <sean.whitney@gmail.com>]

I have a ultra1 that has been getting kernel panic's since about 2.6.18.
 I've changed out all the hardware (except the HD, and network card) and
the panics have followed.  I finally caught it happening so my question
is recommendations on where to post it to get some help.

Thanks

Sean

[ 1406.069019] Kernel panic - not syncing: Aiee, killing interrupt handler!
[ 1406.147371] Call Trace:
[ 1406.176544]  [000000000045e5b0] do_exit+0xb4/0x704
[ 1406.233827]  [0000000000427608] die_if_kernel+0x29c/0x2c4
[ 1406.298408]  [0000000000427f98] bad_trap+0x7c/0xf0
[ 1406.355701]  [00000000004220b0] tl0_resv104+0x30/0xa0
[ 1406.416225]  [00000000100d0a6c] esp_free_lun_tag+0x70/0x74 [esp_scsi]
[ 1406.493311]  [00000000100d1e44] esp_cmd_is_done+0x24/0x154 [esp_scsi]
[ 1406.570398]  [00000000100d3634] scsi_esp_intr+0x128c/0x1de0 [esp_scsi]
[ 1406.648426]  [00000000004a18e8] handle_irq_event_percpu+0x7c/0x1f4
[ 1406.722366]  [00000000004a1a84] handle_irq_event+0x24/0x48
[ 1406.787992]  [00000000004a3820] handle_fasteoi_irq+0xb8/0xf0
[ 1406.855697]  [00000000004a12a4] generic_handle_irq+0x40/0x50
[ 1406.923408]  [000000000042a768] handler_irq+0x90/0xc0
[ 1406.983820]  [00000000004208b4] tl0_irq5+0x14/0x20
[ 1407.041116]  [00000000004377b4] touch_nmi_watchdog+0x8/0x38
[ 1407.107788]  [00000000008e67d0] start_kernel+0x388/0x398
[ 1407.171323]  [0000000000750524] tlb_fixup_done+0x80/0x88
[ 1407.234860] Press Stop-A (L1-A) to return to the boot prom

-- 
If all printers were determined not to print anything
till they were sure it would offend nobody, there would
be very little printed. - Benjamin Franklin