2.6.26-3 oopses on boot on Sunblade 1000
Hi,
I've installed the new kernel today (2.6.26-1-sparc64-smp, version
2.6.26-3) and it oopses during boot on my Sunblade1000:
[ 131.424082] qla2xxx 0001:00:04.0: Allocated (252 KB) for firmware dump...
[ 131.764012] qla2xxx 0001:00:04.0: LIP reset occured (f7e8).
[ 131.948876] scsi0 : qla2xxx
[ 131.963025] qla2xxx 0001:00:04.0: LIP occured (f7e8).
[ 131.966458] qla2xxx 0001:00:04.0: LOOP UP detected (1 Gbps).
[ 131.967797] Unable to handle kernel NULL pointer dereference
[ 131.967808] tsk->{mm,active_mm}->context = 00000000000001cc
[ 131.967815] tsk->{mm,active_mm}->pgd = fffff8007bfcc000
[ 131.967824] \|/ ____ \|/
[ 131.967829] "@'/ .. \`@"
[ 131.967833] /_| \__/ |_\
[ 131.967837] \__U_/
[ 131.967843] qla2xxx_0_dpc(807): Oops [#1]
[ 131.967855] TSTATE: 0000004480009604 TPC: 000000001009c7dc TNPC: 000000001009c7e0 Y: 0000031b Not tainted
[ 131.967904] TPC: <fc_flush_work+0x1c/0x40 [scsi_transport_fc]>
[ 131.967914] g0: 000000000075c400 g1: 0000000000000000 g2: fffff8007b004000 g3: 00000000000b00b6
[ 131.967924] g4: fffff8007b021780 g5: fffff8007ef34000 g6: fffff8007b054000 g7: 20000000870bf4b6
[ 131.967934] o0: 00000000100a1590 o1: 0000000000000003 o2: 0000000000000001 o3: 0000000000000000
[ 131.967944] o4: 0000000000000000 o5: 00007fffffffe000 sp: fffff8007b0570c1 ret_pc: 000000000045033c
[ 131.967966] RPC: <complete+0x44/0x48>
[ 131.967974] l0: fffff8007b006960 l1: 000000000000000f l2: fffff8007e4000b0 l3: 0000000000000000
[ 131.967984] l4: fffff8007e048070 l5: fffff8007e006200 l6: 00000000000000d0 l7: 0000000000000020
[ 131.967994] i0: fffff8007b004000 i1: 0000000000000000 i2: 0000000000000000 i3: fffff8007e0b4b60
[ 131.968004] i4: 0000000000000000 i5: 0000000000000000 i6: fffff8007b057181 i7: 000000001009edb8
[ 131.968033] I7: <fc_remote_port_add+0x18/0x664 [scsi_transport_fc]>
[ 131.968056] Caller[000000001009edb8]: fc_remote_port_add+0x18/0x664 [scsi_transport_fc]
[ 131.968080] Caller[00000000100b3ff8]: qla2x00_update_fcport+0x2b8/0x360 [qla2xxx]
[ 131.968164] Caller[00000000100b499c]: qla2x00_configure_loop+0x85c/0x1a18 [qla2xxx]
[ 131.968194] Caller[00000000100b5bd4]: qla2x00_loop_resync+0x7c/0x10c [qla2xxx]
[ 131.968221] Caller[00000000100b1f7c]: qla2x00_do_dpc+0x60c/0x6e8 [qla2xxx]
[ 131.968248] Caller[000000000046e378]: kthread+0x4c/0x78
[ 131.968263] Caller[0000000000426df8]: kernel_thread+0x38/0x48
[ 131.968275] Caller[000000000046e1a0]: kthreadd+0xc4/0x1a0
[ 131.968285] Instruction DUMP: 11040285 84100018 90122190 <c2586330> 0ac84007 b0100001 c258a0b0 7c0ef9ee d2586008
[ 139.589175] qla2xxx 0001:00:04.0:
[ 139.589179] QLogic Fibre Channel HBA Driver: 8.02.01-k4
[ 139.589184] QLogic QLA22xx -
[ 139.589188] ISP2200: PCI (66 MHz) @ 0001:00:04.0 hdma-, host#=0, fw=2.02.08 TP
Does anyone see anything similar? If you have access to a machine with
QLA2XXXX SCSI controller, can you please try installing the latest
kernel from unstable and making sure that it works for you?
Thanks.
--
Jurij Smakov jurij@wooyd.org
Key: http://www.wooyd.org/pgpkey/ KeyID: C99E03CC
Reply to: