data overrun detected in Data-in phase

[BERTRAND Joël <joel.bertrand@systella.fr>]

	Hello,

	I'm using a Adaptec 29160 in a U60/SMP workstation. For 2.6.23.11, I 
see these messages in log file :

(scsi2:A:4:0): data overrun detected in Data-in phase.  Tag == 0x12.
(scsi2:A:4:0): Have seen Data Phase.  Length = 24576.  NumSGs = 1.
sg[0] - Addr 0x0c087e840 : Length 32
(scsi2:A:4:0): data overrun detected in Data-in phase.  Tag == 0x42.
(scsi2:A:4:0): Have seen Data Phase.  Length = 8192.  NumSGs = 1.
sg[0] - Addr 0x0c087e820 : Length 32
(scsi2:A:4:0): data overrun detected in Data-in phase.  Tag == 0x13.
(scsi2:A:4:0): Have seen Data Phase.  Length = 8192.  NumSGs = 1.
sg[0] - Addr 0x0c087e800 : Length 32
(scsi2:A:4:0): data overrun detected in Data-in phase.  Tag == 0x41.
(scsi2:A:4:0): Have seen Data Phase.  Length = 24576.  NumSGs = 1.
sg[0] - Addr 0x0c087e100 : Length 32
(scsi2:A:4:0): data overrun detected in Data-in phase.  Tag == 0x7a.
(scsi2:A:4:0): Have seen Data Phase.  Length = 8192.  NumSGs = 1.
sg[0] - Addr 0x0c087e7c0 : Length 32
(scsi2:A:4:0): data overrun detected in Data-in phase.  Tag == 0xb.
(scsi2:A:4:0): Have seen Data Phase.  Length = 8192.  NumSGs = 1.
sg[0] - Addr 0x0c087ede0 : Length 32
(scsi2:A:4:0): data overrun detected in Data-in phase.  Tag == 0x54.
(scsi2:A:4:0): Have seen Data Phase.  Length = 8192.  NumSGs = 1.
sg[0] - Addr 0x0c087e180 : Length 32
(scsi2:A:4:0): data overrun detected in Data-in phase.  Tag == 0x30.
(scsi2:A:4:0): Have seen Data Phase.  Length = 8192.  NumSGs = 1.
sg[0] - Addr 0x0c087e160 : Length 32

	I don't understand this message. Disk seems to be good. This device is 
a part of a 7-disk raid6 array. I don't find any information about this 
message. Any idea ?

	Regards,

	JKB