Re: Kernel 2.6.22 from backports fails to boot und Sun Balde 100

[Bernd Zeimetz <bernd@bzed.de>]

> Exactly what I did, so it must be the wrong cable :-(

have a look into the documentation, it's usually well documented in
there. If the serial port is 25pin sub-d, labelled with A/B, it contains
2 serial ports in one connector. Adapters seem to be kinda expensive,
but if you know how to solder it's not a big problem. But probably have
a look into the hardware reference of the machine first :)

Good luck,

Bernd
-- 
Bernd Zeimetz
<bernd@bzed.de>                         <http://bzed.de/>