invalid mac address

[Karl Goetz <kamping_kaiser@internode.on.net>]

hi all,
I put a Linksys PCI network card in my Sunblade 150, running etch.
kgoetz@horatius:~$ uname -a
Linux horatius 2.6.18-4-sparc64 #1 Mon Mar 26 11:16:07 UTC 2007 sparc64
GNU/Linux

When restarting the network i get this output:
SIOCADDRT: Network is unreachable
Failed to bring up eth1.
done.

Does this mean this card/all pci cards are not supported on sparc64?
nics not working is a killer for me - i want this to act as a
proxy/server system for my network.

Below is ifcofig and my interfaces file.

PS, is not having lspci expected?

horatius:~/horatius# ifconfig
eth0      Link encap:Ethernet  HWaddr 00:03:BA:2D:33:EC
          inet addr:192.168.1.103  Bcast:192.168.1.255
Mask:255.255.255.0
          inet6 addr: fe80::203:baff:fe2d:33ec/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:3217 errors:0 dropped:0 overruns:0 frame:0
          TX packets:2147 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:311274 (303.9 KiB)  TX bytes:400582 (391.1 KiB)
          Interrupt:10 Base address:0xd000

eth1      Link encap:UNSPEC  HWaddr
00-03-BA-FF-FE-2D-33-EC-00-00-00-00-00-00-00-00
          inet addr:172.17.42.17  Bcast:172.17.42.31
Mask:255.255.255.240
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:1 dropped:1 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

horatius:~/horatius#




horatius:~/horatius# cat /etc/network/interfaces
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

# Eth0 = public
# Eth1 = local
# Eth2 = airstream

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface (onboard, hostile network)
auto eth0
iface eth0 inet dhcp
# allow-hotplug eth0
# iface eth0 inet static
#       network 192.168.0.0
#       gateway 192.168.0.1
#       address 192.168.0.2
#       netmask 255.255.255.0
#       hostname "horatius"

# Secondary network interface (pci, local connection)
auto eth1
# iface eth1 inet dhcp
# allow-hotplug eth1
iface eth1 inet static
# allow-hotplug eth1
        network 172.17.42.16
        gateway 192.168.0.1
        address 172.17.42.17
        netmask 255.255.255.240
        hostname "horatius"

# Secondary network interface (pci, airstream connection)
# auto eth2
# iface eth2 inet dhcp
# allow-hotplug eth2
# iface eth2 inet static
#       network 10.0.0.0
#       gateway 10.0.0.1
#       address 10.0.0.2
#       netmask 255.255.255.0
#       hostname "airstream-littlehampton"


-- 
Karl Goetz <kamping_kaiser@internode.on.net>