Re: Unofficial 2.6.11 kernel-images available for sparc
On Sat, 2005-03-12 at 00:53 -0500, Jurij Smakov wrote:
> On Fri, 11 Mar 2005, Petr wrote:
>
> > Please ignore my previous post; I made a typo in silo.conf :-/
> > Kernel boots all the way to login prompt now, but X fails to start,
> > keyboard keys are scrambled, and ethernet (happymeal) is not detected.
> >
> > Peter
>
> Hi Petr,
>
> I have not tried starting X with this kernel (I will), however I also
> have an Ultra 5 with the happy meal network card and it is detected
> without problems when I boot 2.6.11 on it. Could you provide some more
> details about the failure in your case, like whether sunhme module is
> loaded, errror messages you receive, etc.
I will paste the output from booting via serial console below.
Thanks,
Peter
Sun Ultra 5/10 UPA/PCI (UltraSPARC-IIi 333MHz), No Keyboard
OpenBoot 3.31, 256 MB (50 ns) memory installed, Serial #13710286.
Ethernet address 8:0:20:d1:33:ce, Host ID: 80d133ce.
Boot device: disk File and args:
SILO Version 1.4.8
PROMLIB: Sun IEEE Boot Prom 3.31.0 2001/07/25 20:36
Linux version 2.6.11-1-sparc64 (root@droopy) (gcc version 3.3.5 (Debian
1:3.3.5-105
ARCH: SUN4U
Ethernet address: 08:00:20:d1:33:ce
Built 1 zonelists
Kernel command line: root=/dev/hda1 ro hdb=ide-scsi max_scsi_luns=1
ide_setup: hdb=ide-scsi
PID hash table entries: 1024 (order: 10, 32768 bytes)
Console: colour dummy device 80x25
Dentry cache hash table entries: 32768 (order: 5, 262144 bytes)
Inode-cache hash table entries: 16384 (order: 4, 131072 bytes)
Memory: 251880k available (2120k kernel code, 616k data, 168k init)
[fffff80000000]
Mount-cache hash table entries: 512 (order: 0, 8192 bytes)
checking if image is initramfs...it isn't (bad gzip magic numbers);
looks like an d
Freeing initrd memory: 3664k freed
NET: Registered protocol family 16
PCI: Probing for controllers.
PCI: Found SABRE, main regs at 000001fe00000000, wsync at
000001fe00001c20
SABRE: Shared PCI config space at 000001fe01000000
SABRE: DVMA at c0000000 [20000000]
PCI0(PBMA): Bus running at 33MHz
PCI-IRQ: Routing bus[ 1] slot[ 1] map[0] to INO[21]
PCI-IRQ: Routing bus[ 1] slot[ 2] map[0] to INO[0f]
PCI-IRQ: Routing bus[ 1] slot[ 3] map[0] to INO[20]
PCI0(PBMB): Bus running at 33MHz
ebus0: [auxio] [power] [SUNW,pll] [se] [su] [su] [ecpp] [fdthree]
[eeprom] [flashp]
power: Control reg at 000001fff1724000 ... powerd running.
usbcore: registered new driver usbfs
usbcore: registered new driver hub
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 8192 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
atyfb: probe of 0000:01:02.0 failed with error -6
Console: switching to mono PROM 80x34
rtc_init: no PC rtc found
[drm] Initialized drm 1.0.0 20040925
su0 at 0x000001fff13062f8 (irq = 4,7ea) is a 16550A
su1 at 0x000001fff13083f8 (irq = 9,7e9) is a 16550A
Console: ttyS0 (SAB82532)
ttyS0 at MMIO 0x1fff1400000 (irq = 7281440) is a SAB82532 V3.2
ttyS1 at MMIO 0x1fff1400040 (irq = 7281440) is a SAB82532 V3.2
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
input: Sun Mouse on su/serio0
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP established hash table entries: 16384 (order: 4, 131072 bytes)
TCP bind hash table entries: 16384 (order: 4, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
NET: Registered protocol family 1
NET: Registered protocol family 17
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 3664KiB [1 disk] into ram disk... done.
òinitrd-tools: 0.1.77amfs filesystem) readonly.
modprobe -k ide-core options="hdb=ide-scsi"
FATAL: Module ide_core not found.
SCSI subsystem initialized
CMD646: IDE controller at PCI slot 0000:01:03.0
CMD646: chipset revision 3
CMD646: chipset revision 0x03, MultiWord DMA Force Limited
CMD646: 100% native mode on irq 4,7e0
ide0: BM-DMA at 0x1fe02c00020-0x1fe02c00027, BIOS settings: hda:pio,
hdb:pio
ide1: BM-DMA at 0x1fe02c00028-0x1fe02c0002f, BIOS settings: hdc:pio,
hdd:pio
hda: MAXTOR 6L040J2, ATA DISK drive
hdb: ASUS CRW-5224A, ATAPI CD/DVD-ROM drive
ide0 at 0x1fe02c00000-0x1fe02c00007,0x1fe02c0000a on irq 4,7e0
hdc: MAXTOR 6L040J2, ATA DISK drive
ide1 at 0x1fe02c00010-0x1fe02c00017,0x1fe02c0001a on irq 4,7e0 (shared
with ide0)
hda: max request size: 128KiB
hda: 78198750 sectors (40037 MB) w/1819KiB Cache, CHS=65535/16/63,
(U)DMA
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4
hdc: max request size: 128KiB
hdc: 78177792 sectors (40027 MB) w/1819KiB Cache, CHS=65535/16/63,
(U)DMA
/dev/ide/host0/bus1/target0/lun0: p1
ERROR: Removing 'pdc202xx_new': Device or resource busy
ERROR: Removing 'alim15x3': Device or resource busy
ERROR: Removing 'cs5520': Device or resource busy
ERROR: Removing 'cs5530': Device or resource busy
ERROR: Removing 'cy82c693': Device or resource busy
ERROR: Removing 'generic': Device or resource busy
ERROR: Removing 'ns87415': Device or resource busy
ERROR: Removing 'pdc202xx_old': Device or resource busy
ERROR: Removing 'serverworks': Device or resource busy
ERROR: Removing 'siimagkjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
e': Device or resource busy
ERROR: Removing 'trm290': Device or resource busy
ERROR: Removing 'via82cxxx': Device or resource busy
version 2.86 booting
Activating swap.
Adding 512048k swap on /dev/hda2. Priority:-1 extents:1
Checking root file system...
fsck 1.35 (28-Feb-2004)
/dev/hda1: EXT3 FS on hda1, internal journal
clean, 89190/640000 files, 584026/1279908 blocks (check in 3 mounts)
System time was Sat Mar 12 13:58:13 UTC 2005.
Setting the System Clock using the Hardware Clock as reference...
System Clock set. System local time is now Sat Mar 12 14:58:15 CET 2005.
Cleaning up ifupdown...done.
Calculating module dependencies... done.
Loading modules...
sg
ide-scsi
FATAL: Module ide_scsi not found.
audio
FATAL: Module audio not found.
cs4231
FATAL: Module cs4231 not found.
All modules loaded.
Checking all file systems...
fsck 1.35 (28-Feb-2004)
/dev/hda4: clean, 7240/4186112 files, 1085162/8366652 blocks (check in 4
mounts)
Setting kernel variables ...
... done.
Mounting local filkjournald starting. Commit interval 5 seconds
EXT3 FS on hda4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
esystemkjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is
recommended
EXT3 FS on hdc, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
s...
/dev/hda4 on /home type ext3 (rw)
/dev/hdc on /data type ext3 (rw)
Cleaning /tmp /var/run /var/lock.
/dev/shm/network/...Initializing: /etc/network/ifstate.
Setting up IP spoofing protection: rp_filter.
Configuring network interfaces...SIOCSIFADDR: No such device
eth0: ERROR while getting interface flags: No such device
SIOCSIFNETMASK: No such device
SIOCSIFBRDADDR: No such device
eth0: ERROR while getting interface flags: No such device
eth0: ERROR while getting interface flags: No such device
Failed to bring up eth0.
done.
Starting portmap daemon: portmap.
Setting the System Clock using the Hardware Clock as reference...
System Clock set. Local time: Sat Mar 12 14:58:20 CET 2005
Initializing random number generator...done.
Recovering nvi editor sessions... done.
Setting up X server socket directory /tmp/.X11-unix...done.
Setting up ICE socket directory /tmp/.ICE-unix...done.
Setting audio parameters...modprobe: FATAL: Error running install
command for soun0
modprobe: FATAL: Error running install command for sound_slot_0
/dev/audioctl: No such device
done.
Not starting X display manager (xdm); it is not the default display
manager.
Debian GNU/Linux 3.1 dar in tty1
darwin login:
Reply to: