Re: Trouble with PCI cards on an Ultra 5
Igmar Palsenberg wrote:
Does that already mean that the cards are not recognized correctly and
cannot be used by the respective driver ?
I've got problems in configuring these cards and would therefore debug
that problem.
Any other hints are welcome.
Can you post a *complete* lspci output ? That would help make things
clear.
Regards,
Igmar
Hi Igmar,
I don't think so ... but here You are. (attached)
I've got another valuable hint that I'll follow tonight. Tomorrow I'll
post the result as diff from lspci with and without the plugged cards.
Cheers, Roger
0000:00:00.0 Host bridge: Sun Microsystems Computer Corp. Ultra IIi
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort+ <MAbort- >SERR- <PERR-
Latency: 40
0000:00:01.0 PCI bridge: Sun Microsystems Computer Corp. Simba Advanced PCI Bridge (rev 13) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size: 0x10 (64 bytes)
Bus: primary=00, secondary=02, subordinate=ff, sec-latency=64
I/O behind bridge: 00000000-00000fff
Memory behind bridge: 00000000-000fffff
Prefetchable memory behind bridge: 00000000-000fffff
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort+ >Reset- FastB2B-
0000:00:01.1 PCI bridge: Sun Microsystems Computer Corp. Simba Advanced PCI Bridge (rev 13) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size: 0x10 (64 bytes)
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 00000000-00000fff
Memory behind bridge: 00000000-000fffff
Prefetchable memory behind bridge: 00000000-000fffff
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort+ >Reset- FastB2B-
0000:01:01.0 Bridge: Sun Microsystems Computer Corp. EBUS (rev 01)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 80 (2500ns min, 6250ns max), Cache Line Size: 0x10 (64 bytes)
Region 0: Memory at 000001fff0000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at 000001fff1000000 (32-bit, non-prefetchable) [size=8M]
Expansion ROM at 00000000e3000000 [disabled] [size=16M]
0000:01:01.1 Ethernet controller: Sun Microsystems Computer Corp. Happy Meal (rev 01)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 80 (2500ns min, 1250ns max), Cache Line Size: 0x10 (64 bytes)
Interrupt: pin ? routed to IRQ 7549472
Region 0: Memory at 000001ffe0000000 (32-bit, non-prefetchable) [size=32K]
Expansion ROM at 00000000e4000000 [disabled] [size=16M]
0000:01:02.0 VGA compatible controller: ATI Technologies Inc 3D Rage Pro 215GP (rev 5c) (prog-if 00 [VGA])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (2000ns min), Cache Line Size: 0x10 (64 bytes)
Interrupt: pin A routed to IRQ 7548896
Region 0: Memory at 000001ffe1000000 (32-bit, non-prefetchable) [size=16M]
Region 1: I/O ports at 2c00400 [size=256]
Region 2: Memory at 000001ffe2000000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at 00000000e0020000 [disabled] [size=128K]
0000:01:03.0 IDE interface: Silicon Image, Inc. (formerly CMD Technology Inc) PCI0646 (rev 03) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Silicon Image, Inc. (formerly CMD Technology Inc) PCI0646
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (500ns min, 1000ns max)
Interrupt: pin A routed to IRQ 7549440
Region 0: I/O ports at 2c00000 [size=8]
Region 1: I/O ports at 2c00008 [size=4]
Region 2: I/O ports at 2c00010 [size=8]
Region 3: I/O ports at 2c00018 [size=4]
Region 4: I/O ports at 2c00020 [size=16]
Reply to: