LIRC and SPARC (problem with ioctl32)

[Boer Attila Laszlo <boera@rdslink.ro>]

Hi,

LIRC 0.7.2 compiles fine under Debian SPARC (stable). The lirc_gpio module
loads succesfully (tested with 2.4.27) but after I start lircd and try to
test with irw the lirc daemon dies.
Here is the output from dmesg:
.................................
Dec 24 22:43:36 solaris kernel: lirc_dev: IR Remote Control driver
registered, at major 61 Dec 24 22:43:36 solaris kernel: lirc_gpio (-1):
card type 0x22, id 0x6609107d Dec 24 22:43:36 solaris kernel: lirc_dev:
lirc_register_plugin: sample_rate: 0 Dec 24 22:43:36 solaris kernel:
lirc_gpio (0): driver registered Dec 24 22:45:01 solaris kernel:
sys32_ioctl(lircd:2562): Unknown cmd fd(7) cmd(40046900) arg(00022994)
................................

If I compile a 64 bit lircd, it works fine.
............................
 file /usr/local/sbin/lircd
/usr/local/sbin/lircd: ELF 64-bit MSB executable, SPARC V9, version 1
(SYSV), for GNU/Linux 2.4.18, dynamically linked (uses shared libs), not
stripped
...........................
irw
00000000c03f00ff 00 POWER RM-0010
00000000c03f00ff 01 POWER RM-0010
00000000c03f00ff 02 POWER RM-0010
00000000c03f00ff 03 POWER RM-0010
00000000c03f30cf 00 CH_UP RM-0010
00000000c03f30cf 01 CH_UP RM-0010
00000000c03f30cf 02 CH_UP RM-0010
00000000c03f30cf 03 CH_UP RM-0010
00000000c03f08f7 00 CH_DOWN RM-0010
00000000c03f08f7 01 CH_DOWN RM-0010
00000000c03f08f7 02 CH_DOWN RM-0010
00000000c03f08f7 03 CH_DOWN RM-0010
............................

Any suggestions?

Best regards,
Attila