Re: Several problems with 2.6.0-test9
Oops, I attached dmesg_2.6 twice. So here is dmesg_2.4. As you can see,
2.4.22 kernel runs well on my hardware.
-- Honza Houstek
PROMLIB: Sun IEEE Boot Prom 3.19.4 1999/04/28 15:05
Linux version 2.4.22-hh (root@sarlacc) (gcc version 3.2.3 (Debian)) #1 Sun Sep 21 17:25:20 CEST 2003
ARCH: SUN4U
Ethernet address: 08:00:20:b0:db:9d
On node 0 totalpages: 32248
zone(0): 49059 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Found CPU 0 (node=f006d428,mid=0)
Found 1 CPU prom device tree node(s).
Kernel command line: root=/dev/hde4
Console: mono PROM 80x34
Calibrating delay loop... 539.03 BogoMIPS
Memory: 253328k available (2040k kernel code, 312k data, 344k init) [fffff80000000000,0000000017f46000]
Dentry cache hash table entries: 32768 (order: 6, 524288 bytes)
Inode cache hash table entries: 16384 (order: 5, 262144 bytes)
Mount cache hash table entries: 512 (order: 0, 8192 bytes)
Buffer cache hash table entries: 8192 (order: 3, 65536 bytes)
Page-cache hash table entries: 32768 (order: 5, 262144 bytes)
POSIX conformance testing by UNIFIX
PCI: Probing for controllers.
PCI: Found SABRE, main regs at 000001fe00000000, wsync at 000001fe00001c20
SABRE: Shared PCI config space at 000001fe01000000
SABRE: DVMA at c0000000 [20000000]
PCI-IRQ: Routing bus[ 2] slot[ 2] map[0] to INO[14]
PCI-IRQ: Routing bus[ 2] slot[ 3] map[0] to INO[18]
PCI0(PBMA): Bus running at 33MHz
PCI-IRQ: Routing bus[ 1] slot[ 1] map[0] to INO[21]
PCI-IRQ: Routing bus[ 1] slot[ 2] map[0] to INO[0f]
PCI-IRQ: Routing bus[ 1] slot[ 3] map[0] to INO[20]
PCI0(PBMB): Bus running at 33MHz
ebus0: [auxio] [power] [SUNW,pll] [se] [su] [su] [ecpp] [fdthree] [eeprom] [flashprom] [SUNW,CS4231]
PCIO serial driver version 1.54
su(mouse) at 0x1fff13062f8 (irq = 4,7ea) is a 16550A
Sun Mouse-Systems mouse driver version 1.00
su(kbd) at 0x1fff13083f8 (irq = 9,7e9) is a 16550A
Sun TYPE 5 keyboard detected without keyclick
SAB82532 serial driver version 1.65
ttyS00 at 0x1fff1400000 (irq = 12,7eb) is a SAB82532 V3.2
ttyS01 at 0x1fff1400040 (irq = 12,7eb) is a SAB82532 V3.2
power: Control reg at 000001fff1724000 ... powerd running.
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
pty: 256 Unix98 ptys configured
rtc_init: no PC rtc found
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
loop: loaded (max 8 devices)
sunhme.c:v2.01 26/Mar/2002 David S. Miller (davem@redhat.com)
eth0: HAPPY MEAL (PCI/CheerIO) 10/100BaseT Ethernet 08:00:20:b0:db:9d
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
02:03.0: 3Com PCI 3c905B Cyclone 100baseTx at 0x1fe02000480. Vers LK1.1.16
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SiI680: IDE controller at PCI slot 02:02.0
SiI680: chipset revision 2
SiI680: not 100% native mode: will probe irqs later
SiI680: BASE CLOCK == 133
ide0: MMIO-DMA , BIOS settings: hda:pio, hdb:pio
ide1: MMIO-DMA , BIOS settings: hdc:pio, hdd:pio
CMD646: IDE controller at PCI slot 01:03.0
CMD646: chipset revision 3
CMD646: chipset revision 0x03, MultiWord DMA Force Limited
CMD646: 100% native mode on irq 4,7e0
ide2: BM-DMA at 0x1fe02c00020-0x1fe02c00027, BIOS settings: hde:pio, hdf:pio
ide3: BM-DMA at 0x1fe02c00028-0x1fe02c0002f, BIOS settings: hdg:pio, hdh:pio
hda: ST3160023A, ATA DISK drive
hdc: ST3160023A, ATA DISK drive
hde: ST3120026A, ATA DISK drive
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide0 at 0x1ff00002080-0x1ff00002087,0x1ff0000208a on irq 4,7d4
ide1 at 0x1ff000020c0-0x1ff000020c7,0x1ff000020ca on irq 4,7d4
ide2 at 0x1fe02c00000-0x1fe02c00007,0x1fe02c0000a on irq 4,7e0
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 312581808 sectors (160042 MB) w/8192KiB Cache, CHS=19457/255/63, UDMA(100)
hdc: attached ide-disk driver.
hdc: host protected area => 1
hdc: 312581808 sectors (160042 MB) w/8192KiB Cache, CHS=19457/255/63, UDMA(100)
hde: attached ide-disk driver.
hde: host protected area => 1
hde: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=14593/255/63, (U)DMA
Partition check:
hda: hda1 hda2
hdc: hdc1 hdc2
hde: hde1 hde2 hde3 hde4 hde5
md: linear personality registered as nr 1
md: raid1 personality registered as nr 3
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 32768)
ip_conntrack version 2.1 (989 buckets, 7912 max) - 416 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
reiserfs: found format "3.6" with standard journal
reiserfs: checking transaction log (device ide2(33,4)) ...
for (ide2(33,4))
ide2(33,4):Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Adding Swap: 1020104k swap-space (priority 0)
reiserfs: found format "3.6" with standard journal
reiserfs: checking transaction log (device ide1(22,1)) ...
for (ide1(22,1))
ide1(22,1):Using r5 hash to sort names
reiserfs: found format "3.6" with standard journal
reiserfs: checking transaction log (device ide0(3,1)) ...
for (ide0(3,1))
ide0(3,1):Using r5 hash to sort names
reiserfs: found format "3.6" with standard journal
reiserfs: checking transaction log (device ide2(33,5)) ...
for (ide2(33,5))
ide2(33,5):Using r5 hash to sort names
eth1.211: add 01:00:5e:00:00:01 mcast address to master interface
Reply to: