jumpers on ultra 5 riser card.
Hi, I'm having trouble is setting up a sym53c915 card.
lspci output is:
==============================================================================
00:00.0 Host bridge: Sun Microsystems Computer Corp. Ultra IIi
00:01.0 PCI bridge: Sun Microsystems Computer Corp. Simba Advanced PCI Bridge (rev 11)
00:01.1 PCI bridge: Sun Microsystems Computer Corp. Simba Advanced PCI Bridge (rev 11)
01:01.0 Bridge: Sun Microsystems Computer Corp. EBUS (rev 01)
01:01.1 Ethernet controller: Sun Microsystems Computer Corp. Happy Meal (rev 01)
01:02.0 VGA compatible controller: ATI Technologies Inc 3D Rage I/II 215GT [Mach64 GT] (rev 9a)
01:03.0 IDE interface: CMD Technology Inc PCI0646 (rev 03)
02:01.0 Ethernet controller: VIA Technologies, Inc. VT86C100A [Rhine 10/100] (rev 06)
02:03.0 SCSI storage controller: LSI Logic / Symbios Logic (formerly NCR) 53c815 (rev 03)
==============================================================================
but I cannot get to any connected device.
I noticed that on the riser card there are three jumpers for the three pci
slots.
position 1 is for PASS and 2 is for END.
The machine (2nd hand) arrived with all jumpers disconnected.
What should be the "normal" setting? On the Ultra5 reference manual there
is no mention of these jumpers (and of other jumpers like JP10, JP8, JP9
either, for that matter).
If someone has an opened U5, would it posible to post the setting of the
jumpers on the riser card?
TIA
--
Regards,
Antonio Prioglio [a.prioglio@cbtcentre.co.uk]
http://www.cbtcentre.co.uk
====================================================
Cognitive Behavioural Therapy Centre - London
Reply to: