Re: Debian 2.2r3 on Sun Enterprise 3500
E3500 is fiber-channel for default HD setup unless it has been
modified from factory default-
T
Santiago Garcia Mantinan wrote:
> Hi!
>
> > I have an Enterprise 3500 machine that I am trying to install Debian on.
>
> I installed on a Enterprise 3000 without any problem, then having raid took
> me more, but installing was flawless
>
> > Unfortunately, it does not seem to be able to access the scsi drives
> > during install. It sees the CDROM, but none of the six scsi drives in
> > the system. No errors about unrecognized scsi controller or anything.
>
> Is the cd on the same controller as the disks?
>
> The 3000 has this controller:
> esp0: IRQ 7,db SCSI ID 7 Clk 40MHz CCF=8 TOut 167 NCR53C9XF(espfast)
> ESP: Total of 1 ESP hosts found, 1 actually in use.
> scsi0 : Sparc ESP366-HME
>
> As I tell you, no problem at all with it.
>
> Regards...
> --
> Manty/BestiaTester -> http://manty.net
>
> --
> To UNSUBSCRIBE, email to debian-sparc-request@lists.debian.org
> with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
--
----
Tad Bilby
Rave Computer Assoc.
Technical Support
800-966-7283 x224
*******************************
Reply to: