esp0: Gross error sreg=51
I keep noticing this error on boot up.
esp0: Gross error sreg=51
I suspect it is not a good thing, but I don't know what it means. The
system seems to be working anyhow. Is this something I can/should fix. Does it have to do with the kernel? hardware? whatever??
--
Josh Kuperman
josh@saratoga.lib.ny.us
Probably more info than anyone wants to look at:
josh@whirlaway:/var/log$ more dmesg
PROMLIB: Sun Boot Prom Version 3 Revision 2
Linux version 2.2.15 (root@auric) (gcc version 2.95.2 20000313 (Debian GNU/Linux
)) #1 SMP Sun Apr 30 00:05:15 EDT 2000
ARCH: SUN4M
TYPE: Sun4m SparcStation10/20
Ethernet address: 8:0:20:12:7c:70
Boot time fixup v1.6. 4/Mar/98 Jakub Jelinek (jj@ultra.linux.cz). Patching kerne
l for srmmu[TI Viking/MXCC]/iommu
[0]: v[f0000000,fd000000](d000000) p[00000000]
[1]: v[dd000000,eff4f000](12f4f000) p[0d000000]
Found CPU 0 <node=ffd66140,mid=8>
Found CPU 1 <node=ffd66500,mid=10>
Found 2 CPU prom device tree node(s).
Power off control detected.
Console: colour dummy device 80x25
Calibrating delay loop... 49.87 BogoMIPS
Memory: 514568k available (1332k kernel code, 7516k data, 164k init) [dd000000,f
d000000]
Dentry hash table entries: 65536 (order 7, 512k)
Buffer cache hash table entries: 262144 (order 8, 1024k)
Page cache hash table entries: 65536 (order 6, 256k)
POSIX conformance testing by UNIFIX
Entering SMP Mode...
Starting CPU 1 at f0193d44
Calibrating delay loop... 49.97 BogoMIPS
Total of 2 Processors activated (99.84 BogoMIPS).
IOMMU: impl 0 vers 3 page table at fcf00000 of size 1048576 bytes
sbus0: Clock 20.0 MHz
dma0: Revision 2
dma1: Revision 2
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
TCP: Hash tables configured (ehash 524288 bhash 65536)
Linux IP multicast router 0.06 plus PIM-SM
Starting kswapd v 1.5
Console: switching to colour frame buffer device 128x54
fb0: cgsix at e.20000000 TEC Rev 3 CPU 68020 Rev 8 [GX]
Sparc Zilog8530 serial driver version 1.41.2.5
tty00 at 0xffede004 (irq = 44) is a Zilog8530
tty01 at 0xffede000 (irq = 44) is a Zilog8530
tty02 at 0xffedb004 (irq = 44) is a Zilog8530
tty03 at 0xffedb000 (irq = 44) is a Zilog8530
Sun TYPE 5 keyboard detected without keyclick
pty: 256 Unix98 ptys configured
Sun Mouse-Systems mouse driver version 1.00
RAM disk driver initialized: 16 RAM disks of 4096K size
loop: registered device at major 7
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
md driver 0.36.6 MAX_MD_DEV=4, MAX_REAL=8
esp0: IRQ 36 SCSI ID 7 Clk 40MHz CCF=8 TOut 167 NCR53C9XF(espfast)
ESP: Total of 1 ESP hosts found, 1 actually in use.
scsi0 : Sparc ESP100A-FAST
scsi : 1 host.
Vendor: SEAGATE Model: ST39216N Rev: 0004
Type: Direct-Access ANSI SCSI revision: 03
Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
scsi : detected 1 SCSI disk total.
esp0: target 0 [period 100ns offset 15 10.00MHz FAST SCSI-II]
SCSI device sda: hdwr sector= 512 bytes. Sectors= 17942584 [8761 MB] [8.8 GB]
sunlance.c:v1.12 11/Mar/99 Miguel de Icaza (miguel@nuclecu.unam.mx)
eth0: LANCE 08:00:20:12:7c:70
eth0: using auto-carrier-detection.
eth0: Carrier Lost, trying TPE
IP-Config: Incomplete network configuration information.
Partition check:
Partition check:
sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7
VFS: Mounted root (ext2 filesystem) readonly.
esp0: Gross error sreg=51
esp0: Gross error sreg=51
esp0: Gross error sreg=51
Adding Swap: 1023816k swap-space (priority -1)
esp0: Gross error sreg=51
esp0: Gross error sreg=51
esp0: Gross error sreg=53
esp0: Gross error sreg=53
esp0: Gross error sreg=53
esp0: Gross error sreg=51
etc filling the rest of the dmesg file.
Reply to: