[thhsieh: [Update] xcin-2.5.1-2]
----- Forwarded message from Tung-Han Hsieh <thhsieh> -----
Date: Wed, 22 Sep 1999 11:31:11 +0800
From: Tung-Han Hsieh <thhsieh>
To: xcin@linux.org.tw
Subject: [Update] xcin-2.5.1-2
X-Mailer: Mutt 0.95.4us
Hi, 各位:
请试试这一个新的 update:
ftp://xcin.linux.org.tw/pub/xcin/xcin/xcin-2.5.1-2.tar.gz
ftp://twcpro.phys.ntu.edu.tw/xcin/xcin/xcin-2.5.1-2.tar.gz
同时搭配目前的 libtabe-0.1-pre4:
ftp://xcin.linux.org.tw/pub/xcin/libtabe/devel/libtabe-0.1-pre4.tar.gz
ftp://twcpro.phys.ntu.edu.tw/xcin/libtabe/devel/libtabe-0.1-pre4.tar.gz
目前 libtabe 还有问题有待解决,尤其是 bims.c 选字的部分,同时也有
一个网友 Joe <joe@os.nctu.edu.tw> 所提供的 patch (详见
http://xcin.linux.org.tw/libtabe/index.html), 有兴趣的朋友可以试
看看,在此感谢这位网友的提供。
以下是这一版 xcin 的 change log (相较于 xcin-2.5.1-1):
1. bimsphone bug fix: mcch choice problem for N%10 = 0 or 1, and '<', '>'
are not functional to change pages. Now page changes can be rotated, and
',', '.' keys are also used for change pages.
Thanks to joe <joe@os.nctu.edu.tw>.
2. bimsphone new function: add keyword SELEC_KEY in xcinrc to choose the
selection keys.
Thanks to Scott Tsai <scottt@tpts5.seed.net.tw>.
3. gui.c & bimsphone bug fix: fix the displaying problem for mcch when
N%10 = 1.
Thanks to joe and Scott Tsai.
4. bimsphone bug fix: don't send any irrelevent keys back to the XIM client
when bimsphone buffer is not empty, in order to work around with the
problem of netscape.
Thanks to platin <platin@linux.org.tw>.
hashao <hashao@china.com>.
(PS. to platin and hashao:
这个 bug 就是 platin 曾向我回报的,在 netscape + bimsphone 下若
xcin 视窗中有东东,随意按左右上下等键 xcin 里头的东东会跟着消失。
由于 netscape 那样的设计,我发现这个问题很难克服。因此,目前我就
采用了 hashao 的建议,当 xcin buffer 里头有东东时,您的上下左右
键无法直接传入 XIM client 中,这样的修改应该是合理的,因为此时您
是针对某个游标点输入,只是输入的东东仍 catch 在 xcin 里头而已,
故这时候您没有任何理由需要移动 client 上的游标,除非您将 catch
在 xcin 里头的东东全部都送出去为止。但对于 netscape 的情况而言,
仍然是治标不治本,如果您使用滑鼠去移动游标的话,问题一样会出现。
治本之道是希望下一版的 netscape 可以将此问题直接修正。
5. xcin-2.5/doc update.
当我在打这封 mail 时,才赫然发现 xcin-2.5.1-2 的 doc/ 里头有些内容忘了
加了,如 Changes 4 没有 Thanks to hashao, 也没有将该问题放入 FAQ ....
等等,对此疏忽真是很抱歉。我会将这些疏忽在下一个 release 时补足的 :-))
T.H.Hsieh
----- End forwarded message -----
--
[ This mail was originally sent to debian-chinese@lists.debian.org and was ]
[ forwarded to this list automatically. Big5 characters are also converted ]
[ to GB at the same time, Please note that there may be errors during the ]
[ conversion as this is not done by a human! ]
Reply to: