Re: Проблемы с интернетом после апгрейда
Прилагаю соотв. файлы
ruslan@debian:~$ sudo ifconfig -a
enp2s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.1.43 netmask 255.255.255.0 broadcast 192.168.1.255
inet6 fe80::5091:4c27:e135:3198 prefixlen 64 scopeid 0x20<link>
ether 60:45:cb:a4:22:f6 txqueuelen 1000 (Ethernet)
RX packets 210 bytes 32647 (31.8 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 218 bytes 22194 (21.6 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device interrupt 16
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1 (Local Loopback)
RX packets 18 bytes 1128 (1.1 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 18 bytes 1128 (1.1 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
[ 0.000000] Linux version 4.9.0-3-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #1 SMP Debian 4.9.30-2+deb9u5 (2017-09-19)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-3-amd64 root=UUID=0c9e7a58-3bc1-457b-98d1-12b6c8be2bfd ro quiet
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c7e7ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c7e80000-0x00000000c7e97fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000c7e98000-0x00000000c7ebffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000c7ec0000-0x00000000c7efffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000236ffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: System manufacturer System Product Name/M5A78L-M LX3, BIOS 1201 04/19/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x237000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF8000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000237000000 aka 9072M
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: update [mem 0xc8000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xc7e80 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8b4f800ff780]
[ 0.000000] Base memory trampoline at [ffff8b4f80099000] 99000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0xa212e000, 0xa212efff] PGTABLE
[ 0.000000] BRK [0xa212f000, 0xa212ffff] PGTABLE
[ 0.000000] BRK [0xa2130000, 0xa2130fff] PGTABLE
[ 0.000000] BRK [0xa2131000, 0xa2131fff] PGTABLE
[ 0.000000] BRK [0xa2132000, 0xa2132fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x35d0b000-0x36e7cfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FBA40 000024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 0x00000000C7E80100 000054 (v01 041913 XSDT1304 20130419 MSFT 00000097)
[ 0.000000] ACPI: FACP 0x00000000C7E80290 0000F4 (v03 041913 FACP1304 20130419 MSFT 00000097)
[ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20160831/tbfadt-658)
[ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20160831/tbfadt-603)
[ 0.000000] ACPI: DSDT 0x00000000C7E80460 00D3E9 (v01 A2035 A2035001 00000001 INTL 20060113)
[ 0.000000] ACPI: FACS 0x00000000C7E98000 000040
[ 0.000000] ACPI: FACS 0x00000000C7E98000 000040
[ 0.000000] ACPI: APIC 0x00000000C7E80390 00008C (v01 041913 APIC1304 20130419 MSFT 00000097)
[ 0.000000] ACPI: MCFG 0x00000000C7E80420 00003C (v01 041913 OEMMCFG 20130419 MSFT 00000097)
[ 0.000000] ACPI: OEMB 0x00000000C7E98040 000072 (v01 041913 OEMB1304 20130419 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000C7E8F460 000038 (v01 041913 OEMHPET 20130419 MSFT 00000097)
[ 0.000000] ACPI: SSDT 0x00000000C7E8F4A0 001158 (v01 A M I POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000236ffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x236ff9000-0x236ffdfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x0000000236ffffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000c7e7ffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x0000000236ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000236ffffff]
[ 0.000000] On node 0 totalpages: 2092574
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12730 pages used for memmap
[ 0.000000] DMA32 zone: 814720 pages, LIFO batch:31
[ 0.000000] Normal zone: 19904 pages used for memmap
[ 0.000000] Normal zone: 1273856 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 22, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 2 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc7e80000-0xc7e97fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc7e98000-0xc7ebffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc7ec0000-0xc7efffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc7f00000-0xffdfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
[ 0.000000] e820: [mem 0xc7f00000-0xffdfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] percpu: Embedded 35 pages/cpu @ffff8b51b6c00000 s103512 r8192 d31656 u262144
[ 0.000000] pcpu-alloc: s103512 r8192 d31656 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2059855
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-3-amd64 root=UUID=0c9e7a58-3bc1-457b-98d1-12b6c8be2bfd ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] AGP: Node 0: aperture [bus addr 0x00000000-0x01ffffff] (32MB)
[ 0.000000] AGP: Your BIOS doesn't leave an aperture memory hole
[ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup
[ 0.000000] AGP: This costs you 64MB of RAM
[ 0.000000] AGP: Mapping aperture over RAM [mem 0xbc000000-0xbfffffff] (65536KB)
[ 0.000000] PM: Registered nosave memory: [mem 0xbc000000-0xbfffffff]
[ 0.000000] Memory: 8072988K/8370296K available (6188K kernel code, 1137K rwdata, 2856K rodata, 1392K init, 688K bss, 297308K reserved, 0K cma-reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[ 0.000000] NR_IRQS:33024 nr_irqs:488 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3515.836 MHz processor
[ 0.000018] Calibrating delay loop (skipped), value calculated using timer frequency.. 7031.67 BogoMIPS (lpj=14063344)
[ 0.000021] pid_max: default: 32768 minimum: 301
[ 0.000040] ACPI: Core revision 20160831
[ 0.006104] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.006163] Security Framework initialized
[ 0.006164] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.006169] AppArmor: AppArmor disabled by boot time parameter
[ 0.006596] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.009022] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.010159] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.010167] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.010483] CPU: Physical Processor ID: 0
[ 0.010484] CPU: Processor Core ID: 0
[ 0.010485] mce: CPU supports 7 MCE banks
[ 0.010491] LVT offset 1 assigned for vector 0xf9
[ 0.010497] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[ 0.010497] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
[ 0.011243] Freeing SMP alternatives memory: 24K (ffffffffb287a000 - ffffffffb2880000)
[ 0.021592] ftrace: allocating 25180 entries in 99 pages
[ 0.028993] smpboot: Max logical packages: 2
[ 0.029342] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.174951] smpboot: CPU0: AMD FX(tm)-6300 Six-Core Processor (family: 0x15, model: 0x2, stepping: 0x0)
[ 0.174953] Performance Events: Fam15h core perfctr, AMD PMU driver.
[ 0.174957] ... version: 0
[ 0.174957] ... bit width: 48
[ 0.174958] ... generic registers: 6
[ 0.174958] ... value mask: 0000ffffffffffff
[ 0.174959] ... max period: 00007fffffffffff
[ 0.174959] ... fixed-purpose events: 0
[ 0.174959] ... event mask: 000000000000003f
[ 0.175492] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.175612] x86: Booting SMP configuration:
[ 0.175613] .... node #0, CPUs: #1 #2 #3 #4 #5
[ 0.576977] x86: Booted up 1 node, 6 CPUs
[ 0.576979] smpboot: Total of 6 processors activated (42189.28 BogoMIPS)
[ 0.585560] devtmpfs: initialized
[ 0.585621] x86/mm: Memory block size: 128MB
[ 0.588686] PM: Registering ACPI NVS region [mem 0xc7e98000-0xc7ebffff] (163840 bytes)
[ 0.588750] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.588764] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.588824] pinctrl core: initialized pinctrl subsystem
[ 0.588928] NET: Registered protocol family 16
[ 0.602934] cpuidle: using governor ladder
[ 0.614933] cpuidle: using governor menu
[ 0.614984] ACPI: bus type PCI registered
[ 0.614986] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.615051] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.615053] PCI: not using MMCONFIG
[ 0.615053] PCI: Using configuration type 1 for base access
[ 0.615054] PCI: Using configuration type 1 for extended access
[ 0.615397] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.615398] mtrr: probably your BIOS does not setup all CPUs.
[ 0.615398] mtrr: corrected configuration.
[ 0.631078] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[ 0.631079] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.631398] ACPI: Added _OSI(Module Device)
[ 0.631399] ACPI: Added _OSI(Processor Device)
[ 0.631399] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.631400] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.631839] ACPI: Executed 3 blocks of module-level executable AML code
[ 0.781513] ACPI: Interpreter enabled
[ 0.781535] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.781536] ACPI: Using IOAPIC for interrupt routing
[ 0.781561] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.782530] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.782542] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.787381] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.787385] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.787388] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.787626] PCI host bridge to bus 0000:00
[ 0.787627] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.787628] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.787629] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.787630] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
[ 0.787631] pci_bus 0000:00: root bus resource [mem 0xc7f00000-0xdfffffff window]
[ 0.787633] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window]
[ 0.787634] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.787641] pci 0000:00:00.0: [1022:9600] type 00 class 0x060000
[ 0.787738] pci 0000:00:02.0: [1022:9603] type 01 class 0x060400
[ 0.787772] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.787808] pci 0000:00:02.0: System wakeup disabled by ACPI
[ 0.787844] pci 0000:00:04.0: [1022:9604] type 01 class 0x060400
[ 0.787876] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.787912] pci 0000:00:04.0: System wakeup disabled by ACPI
[ 0.787964] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f
[ 0.787980] pci 0000:00:11.0: reg 0x10: [io 0xc000-0xc007]
[ 0.787989] pci 0000:00:11.0: reg 0x14: [io 0xb000-0xb003]
[ 0.787998] pci 0000:00:11.0: reg 0x18: [io 0xa000-0xa007]
[ 0.788006] pci 0000:00:11.0: reg 0x1c: [io 0x9000-0x9003]
[ 0.788015] pci 0000:00:11.0: reg 0x20: [io 0x8000-0x800f]
[ 0.788023] pci 0000:00:11.0: reg 0x24: [mem 0xfcfffc00-0xfcffffff]
[ 0.788044] pci 0000:00:11.0: set SATA to AHCI mode
[ 0.788133] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[ 0.788145] pci 0000:00:12.0: reg 0x10: [mem 0xfcffe000-0xfcffefff]
[ 0.788234] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.788268] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
[ 0.788281] pci 0000:00:12.1: reg 0x10: [mem 0xfcffd000-0xfcffdfff]
[ 0.788369] pci 0000:00:12.1: System wakeup disabled by ACPI
[ 0.788406] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[ 0.788422] pci 0000:00:12.2: reg 0x10: [mem 0xfcfff800-0xfcfff8ff]
[ 0.788500] pci 0000:00:12.2: supports D1 D2
[ 0.788500] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.788538] pci 0000:00:12.2: System wakeup disabled by ACPI
[ 0.788578] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[ 0.788591] pci 0000:00:13.0: reg 0x10: [mem 0xfcffc000-0xfcffcfff]
[ 0.788679] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.788714] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
[ 0.788726] pci 0000:00:13.1: reg 0x10: [mem 0xfcffb000-0xfcffbfff]
[ 0.788815] pci 0000:00:13.1: System wakeup disabled by ACPI
[ 0.788851] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[ 0.788867] pci 0000:00:13.2: reg 0x10: [mem 0xfcfff400-0xfcfff4ff]
[ 0.788954] pci 0000:00:13.2: supports D1 D2
[ 0.788955] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.788992] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 0.789034] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.789178] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
[ 0.789192] pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007]
[ 0.789200] pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003]
[ 0.789209] pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007]
[ 0.789217] pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003]
[ 0.789225] pci 0000:00:14.1: reg 0x20: [io 0xff00-0xff0f]
[ 0.789245] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.789245] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.789246] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.789247] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.789333] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[ 0.789353] pci 0000:00:14.2: reg 0x10: [mem 0xfcff4000-0xfcff7fff 64bit]
[ 0.789418] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.789454] pci 0000:00:14.2: System wakeup disabled by ACPI
[ 0.789487] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[ 0.789614] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.789679] pci 0000:00:14.4: System wakeup disabled by ACPI
[ 0.789714] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[ 0.789726] pci 0000:00:14.5: reg 0x10: [mem 0xfcffa000-0xfcffafff]
[ 0.789815] pci 0000:00:14.5: System wakeup disabled by ACPI
[ 0.789852] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
[ 0.789916] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
[ 0.789978] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
[ 0.790039] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
[ 0.790102] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
[ 0.790164] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
[ 0.790269] pci 0000:01:00.0: [10de:0a65] type 00 class 0x030000
[ 0.790279] pci 0000:01:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
[ 0.790288] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.790297] pci 0000:01:00.0: reg 0x1c: [mem 0xce000000-0xcfffffff 64bit pref]
[ 0.790303] pci 0000:01:00.0: reg 0x24: [io 0xdc00-0xdc7f]
[ 0.790309] pci 0000:01:00.0: reg 0x30: [mem 0xfea80000-0xfeafffff pref]
[ 0.790394] pci 0000:01:00.1: [10de:0be3] type 00 class 0x040300
[ 0.790404] pci 0000:01:00.1: reg 0x10: [mem 0xfea7c000-0xfea7ffff]
[ 0.800961] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.800964] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
[ 0.800966] pci 0000:00:02.0: bridge window [mem 0xfd000000-0xfeafffff]
[ 0.800968] pci 0000:00:02.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref]
[ 0.801028] pci 0000:02:00.0: [1969:10a1] type 00 class 0x020000
[ 0.801050] pci 0000:02:00.0: reg 0x10: [mem 0xfebc0000-0xfebfffff 64bit]
[ 0.801060] pci 0000:02:00.0: reg 0x18: [io 0xec00-0xec7f]
[ 0.801158] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.801194] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.812959] pci 0000:00:04.0: PCI bridge to [bus 02]
[ 0.812962] pci 0000:00:04.0: bridge window [io 0xe000-0xefff]
[ 0.812964] pci 0000:00:04.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.813042] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)
[ 0.813051] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.813052] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.813053] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.813054] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
[ 0.813055] pci 0000:00:14.4: bridge window [mem 0xc7f00000-0xdfffffff window] (subtractive decode)
[ 0.813056] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode)
[ 0.813622] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *7 10 12 14 15)
[ 0.813660] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 *10 11 12 14 15)
[ 0.813697] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15)
[ 0.813732] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 *11 12 14 15)
[ 0.813768] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.813804] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.813840] ACPI: PCI Interrupt Link [LNKG] (IRQs *11)
[ 0.813874] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.813935] ACPI: Enabled 1 GPEs in block 00 to 1F
[ 0.814084] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 0.814085] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.814086] vgaarb: loaded
[ 0.814086] vgaarb: bridge control possible 0000:01:00.0
[ 0.814150] PCI: Using ACPI for IRQ routing
[ 0.822756] PCI: pci_cache_line_size set to 64 bytes
[ 0.822803] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ 0.822804] e820: reserve RAM buffer [mem 0xc7e80000-0xc7ffffff]
[ 0.822805] e820: reserve RAM buffer [mem 0x237000000-0x237ffffff]
[ 0.822952] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.822955] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.824995] clocksource: Switched to clocksource hpet
[ 0.831425] VFS: Disk quotas dquot_6.6.0
[ 0.831446] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.831517] pnp: PnP ACPI init
[ 0.831638] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.831680] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.832051] pnp 00:02: [dma 0 disabled]
[ 0.832111] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.832199] system 00:03: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.832201] system 00:03: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.832202] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.832419] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.832420] system 00:04: [io 0x040b] has been reserved
[ 0.832421] system 00:04: [io 0x04d6] has been reserved
[ 0.832422] system 00:04: [io 0x0c00-0x0c01] has been reserved
[ 0.832423] system 00:04: [io 0x0c14] has been reserved
[ 0.832425] system 00:04: [io 0x0c50-0x0c51] has been reserved
[ 0.832426] system 00:04: [io 0x0c52] has been reserved
[ 0.832427] system 00:04: [io 0x0c6c] has been reserved
[ 0.832428] system 00:04: [io 0x0c6f] has been reserved
[ 0.832429] system 00:04: [io 0x0cd0-0x0cd1] has been reserved
[ 0.832431] system 00:04: [io 0x0cd2-0x0cd3] has been reserved
[ 0.832432] system 00:04: [io 0x0cd4-0x0cd5] has been reserved
[ 0.832433] system 00:04: [io 0x0cd6-0x0cd7] has been reserved
[ 0.832434] system 00:04: [io 0x0cd8-0x0cdf] has been reserved
[ 0.832435] system 00:04: [io 0x0b00-0x0b3f] has been reserved
[ 0.832436] system 00:04: [io 0x0800-0x089f] has been reserved
[ 0.832437] system 00:04: [io 0x0b00-0x0b0f] has been reserved
[ 0.832439] system 00:04: [io 0x0b20-0x0b3f] has been reserved
[ 0.832440] system 00:04: [io 0x0900-0x090f] has been reserved
[ 0.832441] system 00:04: [io 0x0910-0x091f] has been reserved
[ 0.832442] system 00:04: [io 0xfe00-0xfefe] has been reserved
[ 0.832444] system 00:04: [mem 0xc7f00000-0xc7ffffff] has been reserved
[ 0.832445] system 00:04: [mem 0xffb80000-0xffbfffff] has been reserved
[ 0.832446] system 00:04: [mem 0xfec10000-0xfec1001f] has been reserved
[ 0.832447] system 00:04: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.832449] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.832638] system 00:05: [io 0x0230-0x023f] has been reserved
[ 0.832639] system 00:05: [io 0x0290-0x029f] has been reserved
[ 0.832640] system 00:05: [io 0x0300-0x030f] has been reserved
[ 0.832642] system 00:05: [io 0x0a30-0x0a3f] has been reserved
[ 0.832643] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.832695] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.832697] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.832933] system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.832934] system 00:07: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.832935] system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.832936] system 00:07: [mem 0x00100000-0xc7efffff] could not be reserved
[ 0.832938] system 00:07: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.832939] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.833027] pnp: PnP ACPI: found 8 devices
[ 0.839668] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.839683] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.839684] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
[ 0.839687] pci 0000:00:02.0: bridge window [mem 0xfd000000-0xfeafffff]
[ 0.839688] pci 0000:00:02.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref]
[ 0.839691] pci 0000:00:04.0: PCI bridge to [bus 02]
[ 0.839692] pci 0000:00:04.0: bridge window [io 0xe000-0xefff]
[ 0.839694] pci 0000:00:04.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.839698] pci 0000:00:14.4: PCI bridge to [bus 03]
[ 0.839709] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.839710] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.839711] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.839712] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[ 0.839713] pci_bus 0000:00: resource 8 [mem 0xc7f00000-0xdfffffff window]
[ 0.839714] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff window]
[ 0.839715] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.839716] pci_bus 0000:01: resource 1 [mem 0xfd000000-0xfeafffff]
[ 0.839717] pci_bus 0000:01: resource 2 [mem 0xce000000-0xdfffffff 64bit pref]
[ 0.839718] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.839719] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.839720] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window]
[ 0.839721] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window]
[ 0.839722] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.839723] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff window]
[ 0.839724] pci_bus 0000:03: resource 8 [mem 0xc7f00000-0xdfffffff window]
[ 0.839725] pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfebfffff window]
[ 0.839813] NET: Registered protocol family 2
[ 0.839980] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.840164] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.840442] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.840484] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.840526] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.840623] NET: Registered protocol family 1
[ 1.325110] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 1.325117] pci 0000:02:00.0: set MSI_INTX_DISABLE_BUG flag
[ 1.325120] PCI: CLS 64 bytes, default 64
[ 1.325159] Unpacking initramfs...
[ 1.585912] Freeing initrd memory: 17864K (ffff8b4fb5d0b000 - ffff8b4fb6e7d000)
[ 1.586138] PCI-DMA: Disabling AGP.
[ 1.586212] PCI-DMA: aperture base @ bc000000 size 65536 KB
[ 1.586212] PCI-DMA: using GART IOMMU.
[ 1.586214] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 1.590248] perf: AMD NB counters detected
[ 1.590407] LVT offset 0 assigned for vector 0x400
[ 1.590471] perf: AMD IBS detected (0x000000ff)
[ 1.590826] audit: initializing netlink subsys (disabled)
[ 1.590842] audit: type=2000 audit(1514651275.476:1): initialized
[ 1.591228] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[ 1.591310] zbud: loaded
[ 1.592068] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 1.592111] io scheduler noop registered
[ 1.592112] io scheduler deadline registered
[ 1.592124] io scheduler cfq registered (default)
[ 1.592495] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.592499] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.593098] GHES: HEST is not enabled!
[ 1.593162] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.613682] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.614051] Linux agpgart interface v0.103
[ 1.614101] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 1.614102] AMD IOMMUv2 functionality not available on this system
[ 1.614643] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.615073] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.615076] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.615203] mousedev: PS/2 mouse device common for all mice
[ 1.615238] rtc_cmos 00:01: RTC can wake from S4
[ 1.615354] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 1.615375] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.615457] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.615795] NET: Registered protocol family 10
[ 1.615991] mip6: Mobile IPv6
[ 1.615992] NET: Registered protocol family 17
[ 1.615994] mpls_gso: MPLS GSO support
[ 1.616369] microcode: CPU0: patch_level=0x0600081c
[ 1.616375] microcode: CPU1: patch_level=0x0600081c
[ 1.616382] microcode: CPU2: patch_level=0x0600081c
[ 1.616388] microcode: CPU3: patch_level=0x0600081c
[ 1.616394] microcode: CPU4: patch_level=0x0600081c
[ 1.616400] microcode: CPU5: patch_level=0x0600081c
[ 1.616434] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.616560] registered taskstats version 1
[ 1.616572] zswap: loaded using pool lzo/zbud
[ 1.616676] ima: No TPM chip found, activating TPM-bypass!
[ 1.616914] rtc_cmos 00:01: setting system clock to 2017-12-30 16:27:55 UTC (1514651275)
[ 1.616945] PM: Hibernation image not present or could not be loaded.
[ 1.618058] Freeing unused kernel memory: 1392K (ffffffffb271e000 - ffffffffb287a000)
[ 1.618058] Write protecting the kernel read-only data: 12288k
[ 1.618606] Freeing unused kernel memory: 1988K (ffff8b502180f000 - ffff8b5021a00000)
[ 1.620822] Freeing unused kernel memory: 1240K (ffff8b5021cca000 - ffff8b5021e00000)
[ 1.625754] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.637082] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.637143] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.637151] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.637975] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.638001] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.638845] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.638887] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.639196] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.639240] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.639281] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.661613] SCSI subsystem initialized
[ 1.662146] ACPI: bus type USB registered
[ 1.662203] usbcore: registered new interface driver usbfs
[ 1.662227] usbcore: registered new interface driver hub
[ 1.663093] usbcore: registered new device driver usb
[ 1.663484] libata version 3.00 loaded.
[ 1.663665] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.663909] ehci-pci: EHCI PCI platform driver
[ 1.664131] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 1.664136] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.664141] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.664142] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.664155] ehci-pci 0000:00:12.2: debug port 1
[ 1.664203] ehci-pci 0000:00:12.2: irq 17, io mem 0xfcfff800
[ 1.669627] AVX version of gcm_enc/dec engaged.
[ 1.669628] AES CTR mode by8 optimization enabled
[ 1.670805] alx 0000:02:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [60:45:cb:a4:22:f6]
[ 1.676999] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.677083] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.677084] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.677085] usb usb1: Product: EHCI Host Controller
[ 1.677086] usb usb1: Manufacturer: Linux 4.9.0-3-amd64 ehci_hcd
[ 1.677087] usb usb1: SerialNumber: 0000:00:12.2
[ 1.677228] hub 1-0:1.0: USB hub found
[ 1.677242] hub 1-0:1.0: 6 ports detected
[ 1.677608] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 1.677613] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.677616] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.677625] ehci-pci 0000:00:13.2: debug port 1
[ 1.677663] ehci-pci 0000:00:13.2: irq 19, io mem 0xfcfff400
[ 1.681973] alx 0000:02:00.0 enp2s0: renamed from eth0
[ 1.693092] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.693287] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.693288] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.693289] usb usb2: Product: EHCI Host Controller
[ 1.693290] usb usb2: Manufacturer: Linux 4.9.0-3-amd64 ehci_hcd
[ 1.693291] usb usb2: SerialNumber: 0000:00:13.2
[ 1.693415] hub 2-0:1.0: USB hub found
[ 1.693428] hub 2-0:1.0: 6 ports detected
[ 1.693637] ahci 0000:00:11.0: version 3.0
[ 1.693880] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 1.693882] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[ 1.693974] ohci-pci: OHCI PCI platform driver
[ 1.694642] scsi host0: ahci
[ 1.694771] scsi host1: ahci
[ 1.694877] scsi host2: ahci
[ 1.694989] scsi host3: ahci
[ 1.695049] ata1: SATA max UDMA/133 abar m1024@0xfcfffc00 port 0xfcfffd00 irq 22
[ 1.695053] ata2: SATA max UDMA/133 abar m1024@0xfcfffc00 port 0xfcfffd80 irq 22
[ 1.695057] ata3: SATA max UDMA/133 abar m1024@0xfcfffc00 port 0xfcfffe00 irq 22
[ 1.695059] ata4: SATA max UDMA/133 abar m1024@0xfcfffc00 port 0xfcfffe80 irq 22
[ 1.695084] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B07 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\SOR1) (20160831/utaddress-247)
[ 1.695091] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B07 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B2F (\SMRG) (20160831/utaddress-247)
[ 1.695096] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B07 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B2F (\_SB.PCI0.SBRG.ASOC.SMRG) (20160831/utaddress-247)
[ 1.695099] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.695929] scsi host4: pata_atiixp
[ 1.696025] scsi host5: pata_atiixp
[ 1.696061] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 1.696062] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 1.696213] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 1.696218] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 1.696241] ohci-pci 0000:00:12.0: irq 16, io mem 0xfcffe000
[ 1.757093] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.757094] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.757095] usb usb3: Product: OHCI PCI host controller
[ 1.757096] usb usb3: Manufacturer: Linux 4.9.0-3-amd64 ohci_hcd
[ 1.757097] usb usb3: SerialNumber: 0000:00:12.0
[ 1.757270] hub 3-0:1.0: USB hub found
[ 1.757278] hub 3-0:1.0: 3 ports detected
[ 1.757473] ohci-pci 0000:00:12.1: OHCI PCI host controller
[ 1.757477] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4
[ 1.757495] ohci-pci 0000:00:12.1: irq 16, io mem 0xfcffd000
[ 1.821091] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.821092] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.821093] usb usb4: Product: OHCI PCI host controller
[ 1.821094] usb usb4: Manufacturer: Linux 4.9.0-3-amd64 ohci_hcd
[ 1.821095] usb usb4: SerialNumber: 0000:00:12.1
[ 1.821269] hub 4-0:1.0: USB hub found
[ 1.821277] hub 4-0:1.0: 3 ports detected
[ 1.821478] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 1.821482] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 1.821500] ohci-pci 0000:00:13.0: irq 18, io mem 0xfcffc000
[ 1.885150] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.885152] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.885153] usb usb5: Product: OHCI PCI host controller
[ 1.885153] usb usb5: Manufacturer: Linux 4.9.0-3-amd64 ohci_hcd
[ 1.885154] usb usb5: SerialNumber: 0000:00:13.0
[ 1.885283] hub 5-0:1.0: USB hub found
[ 1.885291] hub 5-0:1.0: 3 ports detected
[ 1.885508] ohci-pci 0000:00:13.1: OHCI PCI host controller
[ 1.885513] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6
[ 1.885529] ohci-pci 0000:00:13.1: irq 18, io mem 0xfcffb000
[ 1.949164] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.949166] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.949167] usb usb6: Product: OHCI PCI host controller
[ 1.949167] usb usb6: Manufacturer: Linux 4.9.0-3-amd64 ohci_hcd
[ 1.949168] usb usb6: SerialNumber: 0000:00:13.1
[ 1.949342] hub 6-0:1.0: USB hub found
[ 1.949351] hub 6-0:1.0: 3 ports detected
[ 1.949546] ohci-pci 0000:00:14.5: OHCI PCI host controller
[ 1.949550] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7
[ 1.949568] ohci-pci 0000:00:14.5: irq 18, io mem 0xfcffa000
[ 2.008788] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.008827] ata1: SATA link down (SStatus 0 SControl 300)
[ 2.013020] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.013022] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.013023] usb usb7: Product: OHCI PCI host controller
[ 2.013023] usb usb7: Manufacturer: Linux 4.9.0-3-amd64 ohci_hcd
[ 2.013024] usb usb7: SerialNumber: 0000:00:14.5
[ 2.013235] hub 7-0:1.0: USB hub found
[ 2.013242] hub 7-0:1.0: 2 ports detected
[ 2.169072] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.169104] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.169657] ata4.00: ATAPI: TSSTcorp CDDVDW SH-222AB, SB01, max UDMA/100
[ 2.170336] ata3.00: ATA-8: ST500DM002-1BD142, KC48, max UDMA/133
[ 2.170337] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.170394] ata4.00: configured for UDMA/100
[ 2.171943] ata3.00: configured for UDMA/133
[ 2.172239] scsi 2:0:0:0: Direct-Access ATA ST500DM002-1BD14 KC48 PQ: 0 ANSI: 5
[ 2.201976] scsi 3:0:0:0: CD-ROM TSSTcorp CDDVDW SH-222AB SB01 PQ: 0 ANSI: 5
[ 2.215438] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 2.215440] sd 2:0:0:0: [sda] 4096-byte physical blocks
[ 2.215470] sd 2:0:0:0: [sda] Write Protect is off
[ 2.215472] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.215487] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.219723] sr 3:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.219724] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.219842] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 2.237080] usb 3-2: new low-speed USB device number 2 using ohci-pci
[ 2.241917] sda: sda1 sda2 sda3 sda4
[ 2.242573] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.452194] usb 3-2: New USB device found, idVendor=046d, idProduct=c077
[ 2.452198] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.452201] usb 3-2: Product: USB Optical Mouse
[ 2.452203] usb 3-2: Manufacturer: Logitech
[ 2.455625] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.460193] usbcore: registered new interface driver usbhid
[ 2.460194] usbhid: USB HID core driver
[ 2.460697] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/0003:046D:C077.0001/input/input3
[ 2.460788] hid-generic 0003:046D:C077.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:12.0-2/input0
[ 2.609055] tsc: Refined TSC clocksource calibration: 3515.784 MHz
[ 2.609073] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x32ad8fc41cb, max_idle_ns: 440795333030 ns
[ 2.826003] PM: Starting manual resume from disk
[ 2.826005] PM: Hibernation image partition 8:1 present
[ 2.826005] PM: Looking for hibernation image.
[ 2.826280] PM: Image not found (code -22)
[ 2.826281] PM: Hibernation image not present or could not be loaded.
[ 2.925061] usb 3-3: new low-speed USB device number 3 using ohci-pci
[ 3.097121] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 3.114120] usb 3-3: New USB device found, idVendor=1a2c, idProduct=4c5e
[ 3.114123] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.114126] usb 3-3: Product: USB Keyboard
[ 3.114128] usb 3-3: Manufacturer: SEMICO
[ 3.122386] input: SEMICO USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/0003:1A2C:4C5E.0002/input/input4
[ 3.181301] hid-generic 0003:1A2C:4C5E.0002: input,hidraw1: USB HID v1.10 Keyboard [SEMICO USB Keyboard] on usb-0000:00:12.0-3/input0
[ 3.189684] input: SEMICO USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.1/0003:1A2C:4C5E.0003/input/input5
[ 3.249269] hid-generic 0003:1A2C:4C5E.0003: input,hiddev0,hidraw2: USB HID v1.10 Keyboard [SEMICO USB Keyboard] on usb-0000:00:12.0-3/input1
[ 3.396716] random: fast init done
[ 3.496969] usb 1-4: new high-speed USB device number 4 using ehci-pci
[ 3.633233] clocksource: Switched to clocksource tsc
[ 3.646108] usb 1-4: New USB device found, idVendor=1908, idProduct=2311
[ 3.646110] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.646111] usb 1-4: Product: USB2.0 PC CAMERA
[ 3.646111] usb 1-4: Manufacturer: Generic
[ 3.646112] usb 1-4: SerialNumber: 20100331010203
[ 4.325008] usb 1-5: new high-speed USB device number 5 using ehci-pci
[ 4.474137] usb 1-5: New USB device found, idVendor=1782, idProduct=4001
[ 4.474138] usb 1-5: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[ 4.474139] usb 1-5: Product: Impress_Fun
[ 4.474140] usb 1-5: Manufacturer: Spreadtrum
[ 4.474140] usb 1-5: SerialNumber: TC4YY170309000863
[ 4.918673] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 5.059635] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 5.059779] systemd[1]: Detected architecture x86-64.
[ 5.078279] systemd[1]: Set hostname to <debian>.
[ 5.483145] random: crng init done
[ 6.842968] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 6.843017] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 6.843043] systemd[1]: Listening on Journal Socket (/dev/log).
[ 6.843091] systemd[1]: Listening on Journal Audit Socket.
[ 6.843109] systemd[1]: Listening on udev Kernel Socket.
[ 6.843135] systemd[1]: Listening on Journal Socket.
[ 6.843248] systemd[1]: Created slice User and Session Slice.
[ 7.388839] lp: driver loaded but no devices found
[ 7.463724] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 7.677852] ppdev: user-space parallel port driver
[ 7.756033] systemd-journald[254]: Received request to flush runtime journal from PID 1
[ 7.799070] RPC: Registered named UNIX socket transport module.
[ 7.799071] RPC: Registered udp transport module.
[ 7.799071] RPC: Registered tcp transport module.
[ 7.799072] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 8.063890] [drm] Initialized
[ 8.523441] nvidia: loading out-of-tree module taints kernel.
[ 8.523445] nvidia: module license 'NVIDIA' taints kernel.
[ 8.523445] Disabling lock debugging due to kernel taint
[ 8.535859] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 8.536223] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 0
[ 8.536228] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 340.102 Mon Jan 16 13:06:29 PST 2017
[ 9.312377] acpi_cpufreq: overriding BIOS provided _PSD data
[ 9.410453] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[ 9.410665] sp5100_tco: PCI Vendor ID: 0x1002, Device ID: 0x4385, Revision ID: 0x3c
[ 9.410684] sp5100_tco: failed to find MMIO address, giving up.
[ 9.453214] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 9.456037] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6
[ 9.456041] ACPI: Power Button [PWRB]
[ 9.456104] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[ 9.456106] ACPI: Power Button [PWRF]
[ 9.583644] ATK0110 ATK0110:00: Overriding interface detection
[ 9.601505] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 9.616097] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 9.616170] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 9.741147] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 9.741156] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 9.772955] wmi: Mapper loaded
[ 10.178068] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 10.178072] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 10.178076] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 10.178078] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 10.178080] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 10.178084] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 10.178086] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 10.178089] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 10.195723] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[ 10.195898] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[ 10.196094] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[ 10.196223] input: HDA ATI SB Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
[ 10.196382] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
[ 10.413471] kvm: disabled by bios
[ 10.466298] EDAC MC: Ver: 3.0.0
[ 10.467765] kvm: disabled by bios
[ 10.670816] MCE: In-kernel MCE decoding enabled.
[ 10.692934] EDAC amd64: DRAM ECC disabled.
[ 10.692946] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 10.757538] EDAC amd64: DRAM ECC disabled.
[ 10.757551] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 10.801442] EDAC amd64: DRAM ECC disabled.
[ 10.801453] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 10.841494] EDAC amd64: DRAM ECC disabled.
[ 10.841505] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 10.893453] EDAC amd64: DRAM ECC disabled.
[ 10.893465] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 10.933801] EDAC amd64: DRAM ECC disabled.
[ 10.933813] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 10.987061] media: Linux media interface: v0.10
[ 11.115461] Linux video capture interface: v2.00
[ 11.159774] uvcvideo: Found UVC 1.00 device USB2.0 PC CAMERA (1908:2311)
[ 11.160484] uvcvideo 1-4:1.0: Entity type for entity Processing 2 was not initialized!
[ 11.160489] uvcvideo 1-4:1.0: Entity type for entity Camera 1 was not initialized!
[ 11.160647] input: USB2.0 PC CAMERA as /devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4:1.0/input/input18
[ 11.160765] usbcore: registered new interface driver uvcvideo
[ 11.160766] USB Video Class driver (1.1.1)
[ 11.169784] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input14
[ 11.169888] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input15
[ 11.169988] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input16
[ 11.170100] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input17
[ 12.975188] Adding 1951740k swap on /dev/sda1. Priority:-1 extents:1 across:1951740k FS
[ 14.086598] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 14.199959] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: usrquota,grpquota,user_xattr
[ 24.130506] input: lircd-uinput as /devices/virtual/input/input19
[ 26.617744] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 26.618382] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 26.619147] alx 0000:02:00.0 enp2s0: NIC Up: 100 Mbps Full
[ 26.619353] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[ 33.101877] NET: Registered protocol family 4
[ 33.120150] NET: Registered protocol family 3
[ 33.150588] NET: Registered protocol family 5
[ 63.503947] fuse init (API version 7.26)
[ 76.627464] UDF-fs: warning (device sr0): udf_fill_super: No partition found (2)
[ 76.654344] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 76.714200] ISO 9660 Extensions: RRIP_1991A
Reply to: