[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Не работает кард-ридер



Всем привет!

Имею ноутбук Asus ROG GL552VW

Установлен Debian Stretch, ядро 4.9.0-1-amd64

Если втыкать напрямую, то получаю в dmesg[1], если через
переходник, то всё норм (значит карточка нормальная). Можно
ли что с этим поделать?

Сам картридер:
lspci -vnn | grep -A5 RTL8411B
03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTL8411B PCI Express Card Reader [10ec:5287] (rev 01)
Subsystem: Realtek Semiconductor Co., Ltd. RTL8411B PCI Express Card Reader [10ec:5287]
Flags: bus master, fast devsel, latency 0, IRQ 125
Memory at df115000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at df100000 [disabled] [size=64K]
Capabilities: [40] Power Management version 3
Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
 

[1] dmesg:
[219613.445163] Buffer I/O error on dev mmcblk0, logical block 2, async page read
[219613.445326] mmcblk0: error -123 sending status command, retrying
[219613.445337] mmcblk0: error -123 sending status command, retrying
[219613.445345] mmcblk0: error -123 sending status command, aborting
[219613.445354] Buffer I/O error on dev mmcblk0, logical block 2, async page read
[219613.448616] mmcblk0: error -123 sending status command, retrying
[219613.448627] mmcblk0: error -123 sending status command, retrying
[219613.448635] mmcblk0: error -123 sending status command, aborting
[219613.448677] mmcblk0: error -123 sending status command, retrying
[219613.448684] mmcblk0: error -123 sending status command, retrying
[219613.448690] mmcblk0: error -123 sending status command, aborting
[219613.448697] Buffer I/O error on dev mmcblk0p1, logical block 952304, async page read
[219613.509852] mmc0: card 1234 removed
[219615.421695] mmc0: new high speed SDHC card at address 1234
[219615.422496] mmcblk0: mmc0:1234 SA04G 3.64 GiB 
[219615.424488]  mmcblk0: p1
[219617.061944] mmc0: card 1234 removed
[219618.241877] mmc0: new high speed SDHC card at address 1234
[219618.242397] mmcblk0: mmc0:1234 SA04G 3.64 GiB 
[219618.243848]  mmcblk0: p1

Спасибо!

Reply to: