Re: Где tty в Debian 8?
Ага. Покажи еще dmesg после загрузки.
И попробуй поотключать всё из usb - поможет или нет.
Загрузка без USB-устройств не помогла.
dmesg (после загрузки вернул всё USB назад)
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16.0-4-amd64
(debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) )
#1 SMP Debian 3.16.7-ckt11-1+deb8u5 (2015-10-09)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64
root=UUID=68add861-31c7-44cb-9503-b25d016d0c1e ro quiet ipv6.disable=1
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006e86afff] usable
[ 0.000000] BIOS-e820: [mem 0x000000006e86b000-0x000000006e871fff]
ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000006e872000-0x000000007d9e6fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007d9e7000-0x000000007dc04fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x000000007dc05000-0x000000007dc1dfff]
ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007dc1e000-0x000000007dce7fff]
ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007dce8000-0x000000007effefff]
reserved
[ 0.000000] BIOS-e820: [mem 0x000000007efff000-0x000000007effffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: ASUSTeK COMPUTER INC. P9D-I Series/P9D-I Series,
BIOS 0804 01/26/2015
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x280000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7E00000000 write-back
[ 0.000000] 1 base 0200000000 mask 7F80000000 write-back
[ 0.000000] 2 base 0080000000 mask 7F80000000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
0x7010600070106
[ 0.000000] e820: update [mem 0x80000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0x7f000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd910-0x000fd91f] mapped
at [ffff8800000fd910]
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
[ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
[ 0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x27fe00000-0x27fffffff]
[ 0.000000] [mem 0x27fe00000-0x27fffffff] page 1G
[ 0.000000] init_memory_mapping: [mem 0x27c000000-0x27fdfffff]
[ 0.000000] [mem 0x27c000000-0x27fdfffff] page 1G
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x27bffffff]
[ 0.000000] [mem 0x200000000-0x27bffffff] page 1G
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x6e86afff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x6e7fffff] page 2M
[ 0.000000] [mem 0x6e800000-0x6e86afff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x6e872000-0x7d9e6fff]
[ 0.000000] [mem 0x6e872000-0x6e9fffff] page 4k
[ 0.000000] [mem 0x6ea00000-0x7d7fffff] page 2M
[ 0.000000] [mem 0x7d800000-0x7d9e6fff] page 4k
[ 0.000000] BRK [0x01af7000, 0x01af7fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x7efff000-0x7effffff]
[ 0.000000] [mem 0x7efff000-0x7effffff] page 4k
[ 0.000000] BRK [0x01af8000, 0x01af8fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[ 0.000000] [mem 0x100000000-0x1ffffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x36186000-0x370bafff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x000000007DC0B0A0 0000B4 (v01 ALASKA A M I
01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x000000007DC18C58 00010C (v05 ALASKA A M I
01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x000000007DC0B1E8 00DA70 (v02 ALASKA A M I
00000010 INTL 20091112)
[ 0.000000] ACPI: FACS 0x000000007DCE6080 000040
[ 0.000000] ACPI: APIC 0x000000007DC18D68 000092 (v03 ALASKA A M I
01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x000000007DC18E00 000044 (v01 ALASKA A M I
01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x000000007DC18E48 000AD8 (v01 PmRef CpuPm
00003000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x000000007DC19920 0002DE (v01 PmRef Cpu0Tst
00003000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x000000007DC19C00 000348 (v01 PmRef ApTst
00003000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x000000007DC19F48 0001C7 (v01 PmRef LakeTiny
00003000 INTL 20120711)
[ 0.000000] ACPI: MCFG 0x000000007DC1A110 00003C (v01 ALASKA A M I
01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x000000007DC1A150 000038 (v01 ALASKA A M I
01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x000000007DC1A188 00036D (v01 SataRe SataTabl
00001000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x000000007DC1A4F8 003126 (v01 SaSsdt SaSsdt
00003000 INTL 20091112)
[ 0.000000] ACPI: BDAT 0x000000007DC1D620 000030 (v01 INTEL HSW-LPT
00001000 INTL 20090903)
[ 0.000000] ACPI: BERT 0x000000007DC1DB70 000030 (v01 AMI AMI BERT
00000000 00000000)
[ 0.000000] ACPI: SPMI 0x000000007DC1D6A8 000040 (v05 A M I OEMSPMI
00000000 AMI. 00000000)
[ 0.000000] ACPI: DMAR 0x000000007DC1D6E8 000080 (v01 INTEL HSW
00000001 INTL 00000001)
[ 0.000000] ACPI: EINJ 0x000000007DC1D768 000130 (v01 AMI AMI EINJ
00000000 00000000)
[ 0.000000] ACPI: ERST 0x000000007DC1D898 000230 (v01 AMIER AMI ERST
00000000 00000000)
[ 0.000000] ACPI: HEST 0x000000007DC1DAC8 0000A8 (v01 AMI AMI HEST
00000000 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000027fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x27fffffff]
[ 0.000000] NODE_DATA [mem 0x27fff9000-0x27fffdfff]
[ 0.000000] [ffffea0000000000-ffffea0008bfffff] PMD ->
[ffff880277600000-ffff88027e5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x27fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0x6e86afff]
[ 0.000000] node 0: [mem 0x6e872000-0x7d9e6fff]
[ 0.000000] node 0: [mem 0x7efff000-0x7effffff]
[ 0.000000] node 0: [mem 0x100000000-0x27fffffff]
[ 0.000000] On node 0 totalpages: 2087293
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 6979 pages used for memmap
[ 0.000000] DMA32 zone: 510433 pages, LIFO batch:31
[ 0.000000] Normal zone: 21504 pages used for memmap
[ 0.000000] Normal zone: 1572864 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI
0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x6e86b000-0x6e871fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7d9e7000-0x7dc04fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7dc05000-0x7dc1dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7dc1e000-0x7dce7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7dce8000-0x7effefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7f000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0x7f000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512
nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88027fc00000 s80896
r8192 d21504 u262144
[ 0.000000] pcpu-alloc: s80896 r8192 d21504 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 2058733
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line:
BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64
root=UUID=68add861-31c7-44cb-9503-b25d016d0c1e ro quiet ipv6.disable=1
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8140392K/8349172K available (5209K kernel code,
946K rwdata, 1832K rodata, 1204K init, 840K bss, 208780K reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS:33024 nr_irqs:744 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3392.331 MHz processor
[ 0.000020] Calibrating delay loop (skipped), value calculated using
timer frequency.. 6784.66 BogoMIPS (lpj=13569324)
[ 0.000022] pid_max: default: 32768 minimum: 301
[ 0.000027] ACPI: Core revision 20140424
[ 0.007570] ACPI: All ACPI Tables successfully acquired
[ 0.008794] Security Framework initialized
[ 0.008801] AppArmor: AppArmor disabled by boot time parameter
[ 0.008801] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.009109] Dentry cache hash table entries: 1048576 (order: 11,
8388608 bytes)
[ 0.010691] Inode-cache hash table entries: 524288 (order: 10,
4194304 bytes)
[ 0.011395] Mount-cache hash table entries: 16384 (order: 5, 131072
bytes)
[ 0.011401] Mountpoint-cache hash table entries: 16384 (order: 5,
131072 bytes)
[ 0.011583] Initializing cgroup subsys memory
[ 0.011586] Initializing cgroup subsys devices
[ 0.011590] Initializing cgroup subsys freezer
[ 0.011592] Initializing cgroup subsys net_cls
[ 0.011594] Initializing cgroup subsys blkio
[ 0.011597] Initializing cgroup subsys perf_event
[ 0.011598] Initializing cgroup subsys net_prio
[ 0.011616] CPU: Physical Processor ID: 0
[ 0.011616] CPU: Processor Core ID: 0
[ 0.011620] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.012356] mce: CPU supports 9 MCE banks
[ 0.012367] CPU0: Thermal monitoring enabled (TM1)
[ 0.012374] process: using mwait in idle threads
[ 0.012376] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
tlb_flushall_shift: 6
[ 0.012447] Freeing SMP alternatives memory: 20K (ffffffff81a1b000 -
ffffffff81a20000)
[ 0.013052] ftrace: allocating 21625 entries in 85 pages
[ 0.018647] dmar: Host address width 39
[ 0.018649] dmar: DRHD base: 0x000000fed90000 flags: 0x1
[ 0.018655] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap
d2008c20660462 ecap f010da
[ 0.018656] dmar: RMRR base: 0x0000007db81000 end: 0x0000007db8dfff
[ 0.018726] IOAPIC id 8 under DRHD base 0xfed90000 IOMMU 0
[ 0.018726] HPET id 0 under DRHD base 0xfed90000
[ 0.018727] Queued invalidation will be enabled to support x2apic and
Intr-remapping.
[ 0.018815] Enabled IRQ remapping in x2apic mode
[ 0.018816] Enabling x2apic
[ 0.018817] Enabled x2apic
[ 0.018821] Switched APIC routing to cluster x2apic.
[ 0.019222] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.058924] smpboot: CPU0: Intel(R) Xeon(R) CPU E3-1240 v3 @ 3.40GHz
(fam: 06, model: 3c, stepping: 03)
[ 0.058935] TSC deadline timer enabled
[ 0.058949] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell
events, full-width counters, Intel PMU driver.
[ 0.058963] ... version: 3
[ 0.058963] ... bit width: 48
[ 0.058964] ... generic registers: 4
[ 0.058964] ... value mask: 0000ffffffffffff
[ 0.058965] ... max period: 0000ffffffffffff
[ 0.058965] ... fixed-purpose events: 3
[ 0.058966] ... event mask: 000000070000000f
[ 0.059982] x86: Booting SMP configuration:
[ 0.059983] .... node #0, CPUs: #1
[ 0.073777] NMI watchdog: enabled on all CPUs, permanently consumes
one hw-PMU counter.
[ 0.073842] #2 #3 #4 #5 #6 #7
[ 0.157008] x86: Booted up 1 node, 8 CPUs
[ 0.157011] smpboot: Total of 8 processors activated (54277.29 BogoMIPS)
[ 0.163415] devtmpfs: initialized
[ 0.165088] PM: Registering ACPI NVS region [mem
0x6e86b000-0x6e871fff] (28672 bytes)
[ 0.165089] PM: Registering ACPI NVS region [mem
0x7dc1e000-0x7dce7fff] (827392 bytes)
[ 0.165618] pinctrl core: initialized pinctrl subsystem
[ 0.165670] NET: Registered protocol family 16
[ 0.165748] cpuidle: using governor ladder
[ 0.165749] cpuidle: using governor menu
[ 0.165779] ACPI FADT declares the system doesn't support PCIe ASPM,
so disable it
[ 0.165780] ACPI: bus type PCI registered
[ 0.165781] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.165849] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.165851] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.166035] PCI: Using configuration type 1 for base access
[ 0.175580] ACPI: Added _OSI(Module Device)
[ 0.175582] ACPI: Added _OSI(Processor Device)
[ 0.175583] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.175583] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.177929] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.224238] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.224665] ACPI: Dynamic OEM Table Load:
[ 0.224669] ACPI: SSDT 0xFFFF880276401000 0003D3 (v01 PmRef Cpu0Cst
00003001 INTL 20120711)
[ 0.236419] ACPI: Dynamic OEM Table Load:
[ 0.236424] ACPI: SSDT 0xFFFF8802768F2E00 000119 (v01 PmRef ApCst
00003000 INTL 20120711)
[ 0.253146] ACPI: Interpreter enabled
[ 0.253151] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep
State [\_S1_] (20140424/hwxface-580)
[ 0.253155] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep
State [\_S2_] (20140424/hwxface-580)
[ 0.253166] ACPI: (supports S0 S3 S4 S5)
[ 0.253167] ACPI: Using IOAPIC for interrupt routing
[ 0.253203] HEST: Table parsing has been initialized.
[ 0.253204] PCI: Using host bridge windows from ACPI; if necessary,
use "pci=nocrs" and report a bug
[ 0.258158] ACPI: Power Resource [FN00] (off)
[ 0.258209] ACPI: Power Resource [FN01] (off)
[ 0.258257] ACPI: Power Resource [FN02] (off)
[ 0.258305] ACPI: Power Resource [FN03] (off)
[ 0.258352] ACPI: Power Resource [FN04] (off)
[ 0.258852] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.258855] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM
ClockPM Segments MSI]
[ 0.259167] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME
AER PCIeCapability]
[ 0.259526] PCI host bridge to bus 0000:00
[ 0.259527] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.259528] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.259529] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.259530] pci_bus 0000:00: root bus resource [mem
0x000a0000-0x000bffff]
[ 0.259531] pci_bus 0000:00: root bus resource [mem
0x000d0000-0x000d3fff]
[ 0.259532] pci_bus 0000:00: root bus resource [mem
0x000d4000-0x000d7fff]
[ 0.259533] pci_bus 0000:00: root bus resource [mem
0x000d8000-0x000dbfff]
[ 0.259534] pci_bus 0000:00: root bus resource [mem
0x000dc000-0x000dffff]
[ 0.259535] pci_bus 0000:00: root bus resource [mem
0x000e0000-0x000e3fff]
[ 0.259536] pci_bus 0000:00: root bus resource [mem
0x000e4000-0x000e7fff]
[ 0.259537] pci_bus 0000:00: root bus resource [mem
0x80000000-0xfeafffff]
[ 0.259542] pci 0000:00:00.0: [8086:0c08] type 00 class 0x060000
[ 0.259601] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
[ 0.259625] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.259653] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.259707] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[ 0.259725] pci 0000:00:14.0: reg 0x10: [mem 0xd3100000-0xd310ffff 64bit]
[ 0.259776] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.259799] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.259837] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[ 0.259855] pci 0000:00:1a.0: reg 0x10: [mem 0xd3112000-0xd31123ff]
[ 0.259930] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.259967] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.259999] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[ 0.260057] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.260083] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.260115] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400
[ 0.260173] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.260198] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.260228] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
[ 0.260289] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.260314] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.260353] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[ 0.260371] pci 0000:00:1d.0: reg 0x10: [mem 0xd3111000-0xd31113ff]
[ 0.260447] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.260485] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.260519] pci 0000:00:1f.0: [8086:8c52] type 00 class 0x060100
[ 0.260656] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
[ 0.260669] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077]
[ 0.260675] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063]
[ 0.260681] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057]
[ 0.260687] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043]
[ 0.260693] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
[ 0.260700] pci 0000:00:1f.2: reg 0x24: [mem 0xd3110000-0xd31107ff]
[ 0.260730] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.260779] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[ 0.260791] pci 0000:00:1f.3: reg 0x10: [mem
0x7ffff01000-0x7ffff010ff 64bit]
[ 0.260808] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
[ 0.260899] pci 0000:01:00.0: [10de:1380] type 00 class 0x030000
[ 0.260909] pci 0000:01:00.0: reg 0x10: [mem 0xd2000000-0xd2ffffff]
[ 0.260919] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff
64bit pref]
[ 0.260928] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff
64bit pref]
[ 0.260934] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.260941] pci 0000:01:00.0: reg 0x30: [mem 0xd3000000-0xd307ffff pref]
[ 0.260990] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 0.261019] pci 0000:01:00.1: [10de:0fbc] type 00 class 0x040300
[ 0.261028] pci 0000:01:00.1: reg 0x10: [mem 0xd3080000-0xd3083fff]
[ 0.268296] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.268298] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.268299] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd30fffff]
[ 0.268403] pci 0000:02:00.0: [8086:1533] type 00 class 0x020000
[ 0.268431] pci 0000:02:00.0: reg 0x10: [mem 0xd6300000-0xd637ffff]
[ 0.268463] pci 0000:02:00.0: reg 0x18: [io 0xd000-0xd01f]
[ 0.268480] pci 0000:02:00.0: reg 0x1c: [mem 0xd6380000-0xd6383fff]
[ 0.268636] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.268674] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.276316] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.276319] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
[ 0.276322] pci 0000:00:1c.0: bridge window [mem 0xd6300000-0xd63fffff]
[ 0.276421] pci 0000:03:00.0: [8086:1533] type 00 class 0x020000
[ 0.276449] pci 0000:03:00.0: reg 0x10: [mem 0xd6200000-0xd627ffff]
[ 0.276481] pci 0000:03:00.0: reg 0x18: [io 0xc000-0xc01f]
[ 0.276498] pci 0000:03:00.0: reg 0x1c: [mem 0xd6280000-0xd6283fff]
[ 0.276653] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.276691] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.284326] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.284329] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff]
[ 0.284332] pci 0000:00:1c.1: bridge window [mem 0xd6200000-0xd62fffff]
[ 0.284415] pci 0000:04:00.0: [1a03:1150] type 01 class 0x060400
[ 0.284537] pci 0000:04:00.0: supports D1 D2
[ 0.284538] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.284565] pci 0000:04:00.0: System wakeup disabled by ACPI
[ 0.292322] pci 0000:00:1c.2: PCI bridge to [bus 04-05]
[ 0.292325] pci 0000:00:1c.2: bridge window [io 0xb000-0xbfff]
[ 0.292328] pci 0000:00:1c.2: bridge window [mem 0xd4000000-0xd60fffff]
[ 0.292419] pci 0000:05:00.0: [1a03:2000] type 00 class 0x030000
[ 0.292446] pci 0000:05:00.0: reg 0x10: [mem 0xd4000000-0xd5ffffff]
[ 0.292458] pci 0000:05:00.0: reg 0x14: [mem 0xd6000000-0xd601ffff]
[ 0.292471] pci 0000:05:00.0: reg 0x18: [io 0xb000-0xb07f]
[ 0.292570] pci 0000:05:00.0: supports D1 D2
[ 0.292571] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.292681] pci 0000:04:00.0: PCI bridge to [bus 05]
[ 0.292688] pci 0000:04:00.0: bridge window [io 0xb000-0xbfff]
[ 0.292692] pci 0000:04:00.0: bridge window [mem 0xd4000000-0xd60fffff]
[ 0.292748] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is
unsupported)
[ 0.293339] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12
14 15)
[ 0.293376] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12
14 15)
[ 0.293418] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12
14 15)
[ 0.293452] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12
14 15)
[ 0.293488] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12
14 15)
[ 0.293528] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14
15) *0, disabled.
[ 0.293568] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14
15) *0, disabled.
[ 0.293610] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 10 11 12
14 15)
[ 0.293806] ACPI: Enabled 5 GPEs in block 00 to 3F
[ 0.293881] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 0.293882] vgaarb: device added:
PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.293894] vgaarb: device added:
PCI:0000:05:00.0,decodes=io+mem,owns=none,locks=none
[ 0.293894] vgaarb: loaded
[ 0.293895] vgaarb: bridge control possible 0000:05:00.0
[ 0.293895] vgaarb: bridge control possible 0000:01:00.0
[ 0.293930] PCI: Using ACPI for IRQ routing
[ 0.298960] PCI: pci_cache_line_size set to 64 bytes
[ 0.298988] pci 0000:00:1f.3: can't claim BAR 0 [mem
0x7ffff01000-0x7ffff010ff 64bit]: no compatible bridge window
[ 0.299014] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.299015] e820: reserve RAM buffer [mem 0x6e86b000-0x6fffffff]
[ 0.299016] e820: reserve RAM buffer [mem 0x7d9e7000-0x7fffffff]
[ 0.299017] e820: reserve RAM buffer [mem 0x7f000000-0x7fffffff]
[ 0.299103] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.299106] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.301125] Switched to clocksource hpet
[ 0.304511] pnp: PnP ACPI init
[ 0.304518] ACPI: bus type PNP registered
[ 0.304560] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.304562] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.304660] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.304661] system 00:01: [io 0xffff] has been reserved
[ 0.304662] system 00:01: [io 0xffff] has been reserved
[ 0.304663] system 00:01: [io 0xffff] has been reserved
[ 0.304664] system 00:01: [io 0x1c00-0x1cfe] has been reserved
[ 0.304665] system 00:01: [io 0x1d00-0x1dfe] has been reserved
[ 0.304666] system 00:01: [io 0x1e00-0x1efe] has been reserved
[ 0.304667] system 00:01: [io 0x1f00-0x1ffe] has been reserved
[ 0.304668] system 00:01: [io 0x1800-0x18fe] could not be reserved
[ 0.304669] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.304671] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.304689] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.304719] system 00:03: [io 0x1854-0x1857] has been reserved
[ 0.304720] system 00:03: Plug and Play ACPI device, IDs INT3f0d
PNP0c02 (active)
[ 0.304783] system 00:04: [io 0x0290-0x029f] has been reserved
[ 0.304784] system 00:04: [io 0x02a0-0x02af] has been reserved
[ 0.304786] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.304903] pnp 00:05: [dma 0 disabled]
[ 0.304930] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.305060] pnp 00:06: [dma 0 disabled]
[ 0.305086] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.305128] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.305130] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.305188] pnp 00:08: Plug and Play ACPI device, IDs IPI0001 (active)
[ 0.305464] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.305465] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.305466] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.305467] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.305468] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.305470] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.305471] system 00:09: [mem 0xfed90000-0xfed93fff] could not be
reserved
[ 0.305472] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.305473] system 00:09: [mem 0xff000000-0xffffffff] has been reserved
[ 0.305474] system 00:09: [mem 0xfee00000-0xfeefffff] could not be
reserved
[ 0.305475] system 00:09: [mem 0xdffdf000-0xdffdffff] has been reserved
[ 0.305477] system 00:09: [mem 0xdffe0000-0xdffeffff] has been reserved
[ 0.305478] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.305663] pnp: PnP ACPI: found 10 devices
[ 0.305664] ACPI: bus type PNP unregistered
[ 0.311872] pci 0000:00:1f.3: BAR 0: assigned [mem
0x80000000-0x800000ff 64bit]
[ 0.311885] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.311886] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.311888] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd30fffff]
[ 0.311891] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.311898] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
[ 0.311902] pci 0000:00:1c.0: bridge window [mem 0xd6300000-0xd63fffff]
[ 0.311908] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.311910] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff]
[ 0.311914] pci 0000:00:1c.1: bridge window [mem 0xd6200000-0xd62fffff]
[ 0.311920] pci 0000:04:00.0: PCI bridge to [bus 05]
[ 0.311923] pci 0000:04:00.0: bridge window [io 0xb000-0xbfff]
[ 0.311929] pci 0000:04:00.0: bridge window [mem 0xd4000000-0xd60fffff]
[ 0.311939] pci 0000:00:1c.2: PCI bridge to [bus 04-05]
[ 0.311942] pci 0000:00:1c.2: bridge window [io 0xb000-0xbfff]
[ 0.311945] pci 0000:00:1c.2: bridge window [mem 0xd4000000-0xd60fffff]
[ 0.311952] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.311953] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.311954] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.311955] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.311955] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.311956] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.311957] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[ 0.311958] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
[ 0.311959] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
[ 0.311960] pci_bus 0000:00: resource 13 [mem 0x80000000-0xfeafffff]
[ 0.311961] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.311961] pci_bus 0000:01: resource 1 [mem 0xc0000000-0xd30fffff]
[ 0.311962] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.311963] pci_bus 0000:02: resource 1 [mem 0xd6300000-0xd63fffff]
[ 0.311964] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
[ 0.311965] pci_bus 0000:03: resource 1 [mem 0xd6200000-0xd62fffff]
[ 0.311966] pci_bus 0000:04: resource 0 [io 0xb000-0xbfff]
[ 0.311967] pci_bus 0000:04: resource 1 [mem 0xd4000000-0xd60fffff]
[ 0.311968] pci_bus 0000:05: resource 0 [io 0xb000-0xbfff]
[ 0.311968] pci_bus 0000:05: resource 1 [mem 0xd4000000-0xd60fffff]
[ 0.312042] NET: Registered protocol family 2
[ 0.312266] TCP established hash table entries: 65536 (order: 7,
524288 bytes)
[ 0.312386] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.312550] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.312564] TCP: reno registered
[ 0.312570] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.312596] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.312686] NET: Registered protocol family 1
[ 0.353236] pci 0000:01:00.0: Video device with shadowed ROM
[ 0.353263] PCI: CLS 64 bytes, default 64
[ 0.353290] Unpacking initramfs...
[ 0.534798] Freeing initrd memory: 15572K (ffff880036186000 -
ffff8800370bb000)
[ 0.534884] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.534886] software IO TLB [mem 0x799e7000-0x7d9e7000] (64MB) mapped
at [ffff8800799e7000-ffff88007d9e6fff]
[ 0.535156] RAPL PMU detected, hw unit 2^-14 Joules, API unit is
2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
[ 0.535191] microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x17
[ 0.535201] microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x17
[ 0.535207] microcode: CPU2 sig=0x306c3, pf=0x2, revision=0x17
[ 0.535213] microcode: CPU3 sig=0x306c3, pf=0x2, revision=0x17
[ 0.535219] microcode: CPU4 sig=0x306c3, pf=0x2, revision=0x17
[ 0.535225] microcode: CPU5 sig=0x306c3, pf=0x2, revision=0x17
[ 0.535231] microcode: CPU6 sig=0x306c3, pf=0x2, revision=0x17
[ 0.535236] microcode: CPU7 sig=0x306c3, pf=0x2, revision=0x17
[ 0.535278] microcode: Microcode Update Driver: v2.00
<tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.535498] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.535547] audit: initializing netlink subsys (disabled)
[ 0.535559] audit: type=2000 audit(1446057682.484:1): initialized
[ 0.535780] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.535793] zbud: loaded
[ 0.535984] VFS: Disk quotas dquot_6.5.2
[ 0.536006] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.536053] msgmni has been set to 15929
[ 0.536310] alg: No test for stdrng (krng)
[ 0.536329] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 252)
[ 0.536375] io scheduler noop registered
[ 0.536377] io scheduler deadline registered
[ 0.536415] io scheduler cfq registered (default)
[ 0.536546] pcieport 0000:00:01.0: irq 41 for MSI/MSI-X
[ 0.536646] pcieport 0000:00:1c.0: irq 42 for MSI/MSI-X
[ 0.536743] pcieport 0000:00:1c.1: irq 43 for MSI/MSI-X
[ 0.536845] pcieport 0000:00:1c.2: irq 44 for MSI/MSI-X
[ 0.536918] pcieport 0000:00:01.0: Signaling PME through PCIe PME
interrupt
[ 0.536919] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.536920] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
[ 0.536921] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[ 0.536939] pcieport 0000:00:1c.0: Signaling PME through PCIe PME
interrupt
[ 0.536939] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.536948] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.536960] pcieport 0000:00:1c.1: Signaling PME through PCIe PME
interrupt
[ 0.536961] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 0.536964] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[ 0.536975] pcieport 0000:00:1c.2: Signaling PME through PCIe PME
interrupt
[ 0.536976] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[ 0.536977] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
[ 0.536984] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[ 0.536994] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.537004] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.537016] intel_idle: MWAIT substates: 0x42120
[ 0.537017] intel_idle: v0.4 model 0x3C
[ 0.537018] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.537327] ERST: Error Record Serialization Table (ERST) support is
initialized.
[ 0.537329] pstore: Registered erst as persistent store backend
[ 0.537404] GHES: APEI firmware first mode is enabled by APEI bit and
WHEA _OSC.
[ 0.537468] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.557850] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200)
is a 16550A
[ 0.578269] 00:06: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200)
is a 16550A
[ 0.578674] Linux agpgart interface v0.103
[ 0.578746] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.581221] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.581225] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.581339] mousedev: PS/2 mouse device common for all mice
[ 0.581364] rtc_cmos 00:02: RTC can wake from S4
[ 0.581507] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.581535] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes
nvram, hpet irqs
[ 0.581543] Intel P-state driver initializing.
[ 0.581554] Intel pstate controlling: cpu 0
[ 0.581566] Intel pstate controlling: cpu 1
[ 0.581584] Intel pstate controlling: cpu 2
[ 0.581598] Intel pstate controlling: cpu 3
[ 0.581616] Intel pstate controlling: cpu 4
[ 0.581635] Intel pstate controlling: cpu 5
[ 0.581654] Intel pstate controlling: cpu 6
[ 0.581667] Intel pstate controlling: cpu 7
[ 0.581685] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.581866] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[ 0.581867] AMD IOMMUv2 functionality not available on this system
[ 0.581918] TCP: cubic registered
[ 0.581920] IPv6: Loaded, but administratively disabled, reboot
required to enable
[ 0.581922] mip6: Mobile IPv6
[ 0.581923] mip6: mip6_init: can't add xfrm type(destopt)
[ 0.581925] NET: Registered protocol family 17
[ 0.581931] mpls_gso: MPLS GSO support
[ 0.582231] registered taskstats version 1
[ 0.582789] rtc_cmos 00:02: setting system clock to 2015-10-28
18:41:22 UTC (1446057682)
[ 0.582842] PM: Hibernation image not present or could not be loaded.
[ 0.583339] Freeing unused kernel memory: 1204K (ffffffff818ee000 -
ffffffff81a1b000)
[ 0.583339] Write protecting the kernel read-only data: 8192k
[ 0.584669] Freeing unused kernel memory: 924K (ffff880001519000 -
ffff880001600000)
[ 0.585014] Freeing unused kernel memory: 216K (ffff8800017ca000 -
ffff880001800000)
[ 0.590971] systemd-udevd[90]: starting version 215
[ 0.591141] random: systemd-udevd urandom read with 2 bits of entropy
available
[ 0.600754] ACPI: Fan [FAN0] (off)
[ 0.601039] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.601041] ACPI: Thermal Zone [TZ00] (28 C)
[ 0.601099] ACPI: Fan [FAN1] (off)
[ 0.601311] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.601314] ACPI: Thermal Zone [TZ01] (30 C)
[ 0.601356] ACPI: Fan [FAN2] (off)
[ 0.601393] ACPI: Fan [FAN3] (off)
[ 0.601419] ACPI: Fan [FAN4] (off)
[ 0.602113] pps_core: LinuxPPS API ver. 1 registered
[ 0.602115] pps_core: Software ver. 5.3.6 - Copyright 2005-2007
Rodolfo Giometti <giometti@linux.it>
[ 0.602329] PTP clock support registered
[ 0.602504] dca service started, version 1.12.1
[ 0.602840] ACPI: bus type USB registered
[ 0.602860] usbcore: registered new interface driver usbfs
[ 0.602867] usbcore: registered new interface driver hub
[ 0.602907] usbcore: registered new device driver usb
[ 0.603604] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.603896] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.603903] xhci_hcd 0000:00:14.0: new USB bus registered, assigned
bus number 1
[ 0.603998] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.604006] ehci-pci: EHCI PCI platform driver
[ 0.604024] xhci_hcd 0000:00:14.0: irq 45 for MSI/MSI-X
[ 0.604127] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.604129] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.604130] SCSI subsystem initialized
[ 0.604132] usb usb1: Product: xHCI Host Controller
[ 0.604133] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
[ 0.604136] usb usb1: SerialNumber: 0000:00:14.0
[ 0.604267] hub 1-0:1.0: USB hub found
[ 0.604287] hub 1-0:1.0: 10 ports detected
[ 0.604315] igb: Intel(R) Gigabit Ethernet Network Driver - version
5.0.5-k
[ 0.604316] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 0.604833] igb 0000:02:00.0: irq 46 for MSI/MSI-X
[ 0.604842] igb 0000:02:00.0: irq 47 for MSI/MSI-X
[ 0.604846] igb 0000:02:00.0: irq 48 for MSI/MSI-X
[ 0.604852] igb 0000:02:00.0: irq 49 for MSI/MSI-X
[ 0.604856] igb 0000:02:00.0: irq 50 for MSI/MSI-X
[ 0.604984] libata version 3.00 loaded.
[ 0.607110] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.607114] xhci_hcd 0000:00:14.0: new USB bus registered, assigned
bus number 2
[ 0.607153] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.607154] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.607155] usb usb2: Product: xHCI Host Controller
[ 0.607156] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
[ 0.607158] usb usb2: SerialNumber: 0000:00:14.0
[ 0.607296] hub 2-0:1.0: USB hub found
[ 0.607307] hub 2-0:1.0: 2 ports detected
[ 0.607821] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.607826] ehci-pci 0000:00:1a.0: new USB bus registered, assigned
bus number 3
[ 0.607837] ehci-pci 0000:00:1a.0: debug port 2
[ 0.611753] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.611764] ehci-pci 0000:00:1a.0: irq 20, io mem 0xd3112000
[ 0.621287] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.621310] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.621311] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.621312] usb usb3: Product: EHCI Host Controller
[ 0.621313] usb usb3: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[ 0.621314] usb usb3: SerialNumber: 0000:00:1a.0
[ 0.621415] hub 3-0:1.0: USB hub found
[ 0.621418] hub 3-0:1.0: 2 ports detected
[ 0.621565] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.621568] ehci-pci 0000:00:1d.0: new USB bus registered, assigned
bus number 4
[ 0.621583] ehci-pci 0000:00:1d.0: debug port 2
[ 0.625491] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.625503] ehci-pci 0000:00:1d.0: irq 23, io mem 0xd3111000
[ 0.633205] igb 0000:02:00.0: added PHC on eth0
[ 0.633206] igb 0000:02:00.0: Intel(R) Gigabit Ethernet Network
Connection
[ 0.633207] igb 0000:02:00.0: eth0: (PCIe:2.5Gb/s:Width x1)
10:c3:7b:45:b4:1b
[ 0.633309] igb 0000:02:00.0: eth0: PBA No: 001300-000
[ 0.633310] igb 0000:02:00.0: Using MSI-X interrupts. 4 rx queue(s),
4 tx queue(s)
[ 0.633840] igb 0000:03:00.0: irq 51 for MSI/MSI-X
[ 0.633843] igb 0000:03:00.0: irq 52 for MSI/MSI-X
[ 0.633845] igb 0000:03:00.0: irq 53 for MSI/MSI-X
[ 0.633848] igb 0000:03:00.0: irq 54 for MSI/MSI-X
[ 0.633850] igb 0000:03:00.0: irq 55 for MSI/MSI-X
[ 0.637327] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.637518] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.637520] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.637521] usb usb4: Product: EHCI Host Controller
[ 0.637522] usb usb4: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[ 0.637523] usb usb4: SerialNumber: 0000:00:1d.0
[ 0.637689] hub 4-0:1.0: USB hub found
[ 0.637715] hub 4-0:1.0: 2 ports detected
[ 0.637896] ahci 0000:00:1f.2: version 3.0
[ 0.637991] ahci 0000:00:1f.2: irq 56 for MSI/MSI-X
[ 0.638053] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps
0x3f impl SATA mode
[ 0.638055] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum
part ems apst
[ 0.664523] igb 0000:03:00.0: added PHC on eth1
[ 0.664525] igb 0000:03:00.0: Intel(R) Gigabit Ethernet Network
Connection
[ 0.664526] igb 0000:03:00.0: eth1: (PCIe:2.5Gb/s:Width x1)
10:c3:7b:45:b4:1c
[ 0.664588] igb 0000:03:00.0: eth1: PBA No: 001300-000
[ 0.664589] igb 0000:03:00.0: Using MSI-X interrupts. 4 rx queue(s),
4 tx queue(s)
[ 0.677792] scsi0 : ahci
[ 0.677920] scsi1 : ahci
[ 0.677991] scsi2 : ahci
[ 0.678065] scsi3 : ahci
[ 0.678135] scsi4 : ahci
[ 0.678204] scsi5 : ahci
[ 0.678230] ata1: SATA max UDMA/133 abar m2048@0xd3110000 port
0xd3110100 irq 56
[ 0.678232] ata2: SATA max UDMA/133 abar m2048@0xd3110000 port
0xd3110180 irq 56
[ 0.678234] ata3: SATA max UDMA/133 abar m2048@0xd3110000 port
0xd3110200 irq 56
[ 0.678236] ata4: SATA max UDMA/133 abar m2048@0xd3110000 port
0xd3110280 irq 56
[ 0.678237] ata5: SATA max UDMA/133 abar m2048@0xd3110000 port
0xd3110300 irq 56
[ 0.678238] ata6: SATA max UDMA/133 abar m2048@0xd3110000 port
0xd3110380 irq 56
[ 0.917462] usb 1-3: new high-speed USB device number 2 using xhci_hcd
[ 0.997490] ata4: SATA link down (SStatus 0 SControl 300)
[ 0.997509] ata3: SATA link down (SStatus 0 SControl 300)
[ 0.997527] ata5: SATA link down (SStatus 0 SControl 300)
[ 0.997545] ata6: SATA link down (SStatus 0 SControl 300)
[ 0.997563] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.997580] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.999988] ata1.00: ATA-8: WDC WD6000HLHX-01JJPV0, 04.05G04, max
UDMA/133
[ 0.999990] ata1.00: 1172123568 sectors, multi 16: LBA48 NCQ (depth
31/32), AA
[ 1.002510] ata1.00: configured for UDMA/133
[ 1.002634] scsi 0:0:0:0: Direct-Access ATA WDC WD6000HLHX-0
5G04 PQ: 0 ANSI: 5
[ 1.009472] ata2.00: ATA-8: OCZ-AGILITY3, 2.22, max UDMA/133
[ 1.009473] ata2.00: 500118192 sectors, multi 16: LBA48 NCQ (depth
31/32), AA
[ 1.019422] ata2.00: configured for UDMA/133
[ 1.019529] scsi 1:0:0:0: Direct-Access ATA OCZ-AGILITY3 2.22
PQ: 0 ANSI: 5
[ 1.021727] sd 0:0:0:0: [sda] 1172123568 512-byte logical blocks:
(600 GB/558 GiB)
[ 1.021750] sd 0:0:0:0: [sda] Write Protect is off
[ 1.021752] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.021763] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 1.021765] sd 1:0:0:0: [sdb] 500118192 512-byte logical blocks: (256
GB/238 GiB)
[ 1.021849] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.021850] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.021877] sd 1:0:0:0: [sdb] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 1.022291] sdb: sdb1 sdb2 sdb3
[ 1.022545] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.028349] sda: sda1
[ 1.028432] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.028807] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.028842] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 1.101927] device-mapper: uevent: version 1.0.3
[ 1.101993] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30)
initialised: dm-devel@redhat.com
[ 1.123403] EXT4-fs (sdb3): mounted filesystem with ordered data
mode. Opts: (null)
[ 1.209325] usb 1-3: New USB device found, idVendor=046b, idProduct=ff01
[ 1.209328] usb 1-3: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 1.209330] usb 1-3: Product: Virtual Hub
[ 1.209331] usb 1-3: Manufacturer: American Megatrends Inc.
[ 1.209333] usb 1-3: SerialNumber: serial
[ 1.209881] hub 1-3:1.0: USB hub found
[ 1.209986] hub 1-3:1.0: 5 ports detected
[ 1.230800] fuse init (API version 7.23)
[ 1.237662] ipmi message handler version 39.2
[ 1.238553] ipmi device interface
[ 1.239041] Copyright (C) 2004 MontaVista Software - IPMI Powerdown
via sys_reboot.
[ 1.240207] IPMI System Interface driver.
[ 1.240225] ipmi_si: probing via ACPI
[ 1.240241] ipmi_si 00:08: [io 0x0ca2] regsize 1 spacing 1 irq 0
[ 1.240242] ipmi_si: Adding ACPI-specified kcs state machine
[ 1.240249] ipmi_si: probing via SMBIOS
[ 1.240250] ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
[ 1.240251] ipmi_si: Adding SMBIOS-specified kcs state machine
duplicate interface
[ 1.240252] ipmi_si: probing via SPMI
[ 1.240253] ipmi_si: SPMI: io 0xca2 regsize 1 spacing 1 irq 0
[ 1.240253] ipmi_si: Adding SPMI-specified kcs state machine
duplicate interface
[ 1.240254] ipmi_si: Trying ACPI-specified kcs state machine at i/o
address 0xca2, slave address 0x0, irq 0
[ 1.246692] systemd-udevd[229]: starting version 215
[ 1.292204] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 1.292212] ACPI: Power Button [PWRB]
[ 1.292270] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 1.292272] ACPI: Power Button [PWRF]
[ 1.297955] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.308614] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 1.311014] EXT4-fs (sdb3): re-mounted. Opts: errors=remount-ro
[ 1.311531] [drm] Initialized drm 1.1.0 20060810
[ 1.311639] ACPI Warning: SystemIO range
0x000000000000f000-0x000000000000f01f conflicts with OpRegion
0x000000000000f000-0x000000000000f00f (\_SB_.PCI0.SBUS.SMBI)
(20140424/utaddress-258)
[ 1.311644] ACPI: If an ACPI driver is available for this device, you
should use it instead of the native driver
[ 1.321587] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 1.325219] iTCO_vendor_support: vendor-support=0
[ 1.325714] ast 0000:05:00.0: enabling device (0000 -> 0003)
[ 1.325871] [drm] AST 2300 detected
[ 1.325909] [drm] dram 1632000000 6 32 03c00000
[ 1.325950] [TTM] Zone kernel: Available graphics memory: 4079164 kiB
[ 1.325951] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 1.325951] [TTM] Initializing pool allocator
[ 1.325954] [TTM] Initializing DMA pool allocator
[ 1.327352] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 1.327386] iTCO_wdt: Found a Lynx Point TCO device (Version=2,
TCOBASE=0x1860)
[ 1.327561] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 1.334921] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 1.334931] snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio
client
[ 1.340947] AVX2 version of gcm_enc/dec engaged.
[ 1.342430] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ 1.353271] alg: No test for crc32 (crc32-pclmul)
[ 1.377154] intel_rapl: Found RAPL domain package
[ 1.377159] intel_rapl: Found RAPL domain core
[ 1.377164] intel_rapl: Found RAPL domain dram
[ 1.389389] Adding 4194300k swap on /swap. Priority:-1 extents:31
across:15966204k SSFS
[ 1.404104] nvidia: module license 'NVIDIA' taints kernel.
[ 1.404106] Disabling lock debugging due to kernel taint
[ 1.412069] vgaarb: device changed decodes:
PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
[ 1.436573] ipmi_si 00:08: Found new BMC (man_id: 0x001043, prod_id:
0x0d63, dev_id: 0x20)
[ 1.440310] IPMI poweroff: ATCA Detect mfg 0x1043 prod 0xD63
[ 1.440312] IPMI poweroff: Found a chassis style poweroff function
[ 1.440373] ipmi_si 00:08: IPMI kcs interface initialized
[ 1.454048] usb 3-1: New USB device found, idVendor=8087, idProduct=8008
[ 1.454051] usb 3-1: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 1.454193] hub 3-1:1.0: USB hub found
[ 1.454292] hub 3-1:1.0: 4 ports detected
[ 1.564277] EXT4-fs (sda1): mounting ext3 file system using the ext4
subsystem
[ 1.565703] usb 4-1: new high-speed USB device number 2 using ehci-pci
[ 1.573919] EXT4-fs (sda1): mounted filesystem with ordered data
mode. Opts: (null)
[ 1.698166] usb 4-1: New USB device found, idVendor=8087, idProduct=8000
[ 1.698168] usb 4-1: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 1.698455] hub 4-1:1.0: USB hub found
[ 1.698545] hub 4-1:1.0: 6 ports detected
[ 1.762159] input: HDA NVidia HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input6
[ 1.762245] input: HDA NVidia HDMI/DP,pcm=7 as
/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input7
[ 1.762343] input: HDA NVidia HDMI/DP,pcm=8 as
/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input8
[ 1.821901] usb 1-3.1: new low-speed USB device number 3 using xhci_hcd
[ 1.976652] usb 1-3.1: New USB device found, idVendor=046b,
idProduct=ff10
[ 1.976654] usb 1-3.1: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 1.976655] usb 1-3.1: Product: Virtual Keyboard and Mouse
[ 1.976656] usb 1-3.1: Manufacturer: American Megatrends Inc.
[ 1.990150] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.033359] usbcore: registered new interface driver usbhid
[ 2.033360] usbhid: USB HID core driver
[ 2.034663] input: American Megatrends Inc. Virtual Keyboard and
Mouse as
/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.1/1-3.1:1.0/0003:046B:FF10.0001/input/input9
[ 2.034785] hid-generic 0003:046B:FF10.0001: input,hidraw0: USB HID
v1.10 Keyboard [American Megatrends Inc. Virtual Keyboard and Mouse] on
usb-0000:00:14.0-3.1/input0
[ 2.034864] input: American Megatrends Inc. Virtual Keyboard and
Mouse as
/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.1/1-3.1:1.1/0003:046B:FF10.0002/input/input10
[ 2.034983] hid-generic 0003:046B:FF10.0002: input,hidraw1: USB HID
v1.10 Mouse [American Megatrends Inc. Virtual Keyboard and Mouse] on
usb-0000:00:14.0-3.1/input1
[ 2.101974] usb 1-3.2: new high-speed USB device number 4 using xhci_hcd
[ 2.254756] usb 1-3.2: New USB device found, idVendor=046b,
idProduct=ff20
[ 2.254757] usb 1-3.2: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 2.254758] usb 1-3.2: Product: Virtual Cdrom Device
[ 2.254759] usb 1-3.2: Manufacturer: American Megatrends Inc.
[ 2.254760] usb 1-3.2: SerialNumber: AAAABBBBCCCC1
[ 2.260244] usb-storage 1-3.2:1.0: USB Mass Storage device detected
[ 2.260530] scsi6 : usb-storage 1-3.2:1.0
[ 2.260579] usbcore: registered new interface driver usb-storage
[ 2.378074] usb 1-3.3: new high-speed USB device number 5 using xhci_hcd
[ 2.530824] usb 1-3.3: New USB device found, idVendor=046b,
idProduct=ff40
[ 2.530825] usb 1-3.3: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 2.530826] usb 1-3.3: Product: Virtual Floppy Device
[ 2.530827] usb 1-3.3: Manufacturer: American Megatrends Inc.
[ 2.530828] usb 1-3.3: SerialNumber: AAAABBBBCCCC2
[ 2.531311] usb-storage 1-3.3:1.0: USB Mass Storage device detected
[ 2.531445] usb-storage 1-3.3:1.0: Quirks match for vid 046b pid
ff40: 200
[ 2.531511] scsi7 : usb-storage 1-3.3:1.0
[ 2.654194] usb 1-3.4: new high-speed USB device number 6 using xhci_hcd
[ 2.806923] usb 1-3.4: New USB device found, idVendor=046b,
idProduct=ff31
[ 2.806925] usb 1-3.4: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 2.806926] usb 1-3.4: Product: Virtual HardDisk Device
[ 2.806927] usb 1-3.4: Manufacturer: American Megatrends Inc.
[ 2.806928] usb 1-3.4: SerialNumber: AAAABBBBCCCC3
[ 2.807445] usb-storage 1-3.4:1.0: USB Mass Storage device detected
[ 2.807757] scsi8 : usb-storage 1-3.4:1.0
[ 3.258803] scsi 6:0:0:0: CD-ROM AMI Virtual CDROM0
1.00 PQ: 0 ANSI: 0 CCS
[ 3.258957] scsi 6:0:0:0: Attached scsi generic sg2 type 5
[ 3.264189] sr0: scsi-1 drive
[ 3.264190] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.264287] sr 6:0:0:0: Attached scsi CD-ROM sr0
[ 3.530888] scsi 7:0:0:0: Direct-Access AMI Virtual Floppy0
1.00 PQ: 0 ANSI: 0 CCS
[ 3.531063] sd 7:0:0:0: Attached scsi generic sg3 type 0
[ 3.531743] sd 7:0:0:0: [sdc] Attached SCSI removable disk
[ 3.807039] scsi 8:0:0:0: Direct-Access AMI Virtual HDISK0
1.00 PQ: 0 ANSI: 0 CCS
[ 3.807267] sd 8:0:0:0: Attached scsi generic sg4 type 0
[ 3.807841] sd 8:0:0:0: [sdd] Attached SCSI removable disk
[ 5.647889] random: nonblocking pool is initialized
[ 22.010948] [sched_delayed] sched: RT throttling activated
[ 22.010953] Switched to clocksource tsc
[ 32.314334] IPMI Watchdog: Unable to register misc device
[ 32.314335] IPMI Watchdog: set timeout error: -22
[ 32.314336] IPMI Watchdog: driver initialized
[ 32.317869] nct6775: Found NCT6779D or compatible chip at 0x2e:0x290
[ 32.317979] nct6775 nct6775.656: Invalid temperature source 7 at
index 1, source register 0x622, temp register 0x150
[ 42.809693] Console: switching to colour frame buffer device 128x48
[ 42.919830] ast 0000:05:00.0: fb0: astdrmfb frame buffer device
[ 42.919831] ast 0000:05:00.0: registered panic notifier
[ 42.944133] [drm] Initialized ast 0.1.0 20120228 for 0000:05:00.0 on
minor 0
[ 42.944209] [drm] Initialized nvidia-drm 0.0.0 20130102 for
0000:01:00.0 on minor 1
[ 42.944214] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 340.65
Tue Dec 2 09:50:34 PST 2014
[ 43.024975] Bridge firewalling registered
[ 43.025863] device eth0 entered promiscuous mode
[ 63.766917] igb 0000:02:00.0 eth0: igb: eth0 NIC Link is Up 100 Mbps
Full Duplex, Flow Control: RX/TX
[ 63.767231] br0: port 1(eth0) entered listening state
[ 63.767236] br0: port 1(eth0) entered listening state
[ 75.820765] device eth1 entered promiscuous mode
[ 78.801047] br0: port 1(eth0) entered learning state
[ 78.986109] igb 0000:03:00.0 eth1: igb: eth1 NIC Link is Up 1000 Mbps
Full Duplex, Flow Control: RX/TX
[ 78.986551] br1: port 1(eth1) entered listening state
[ 78.986553] br1: port 1(eth1) entered listening state
[ 93.816138] br0: topology change detected, propagating
[ 93.816144] br0: port 1(eth0) entered forwarding state
[ 94.008229] br1: port 1(eth1) entered learning state
[ 108.659132] FS-Cache: Loaded
[ 108.659544] Key type dns_resolver registered
[ 108.662760] FS-Cache: Netfs 'cifs' registered for caching
[ 108.662781] Key type cifs.spnego registered
[ 108.662784] Key type cifs.idmap registered
[ 108.684052] RPC: Registered named UNIX socket transport module.
[ 108.684053] RPC: Registered udp transport module.
[ 108.684053] RPC: Registered tcp transport module.
[ 108.684053] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 108.690080] FS-Cache: Netfs 'nfs' registered for caching
[ 108.694822] NFS: Registering the id_resolver key type
[ 108.694830] Key type id_resolver registered
[ 108.694831] Key type id_legacy registered
[ 108.707292] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 109.055339] br1: port 1(eth1) entered forwarding state
[ 114.666011] CIFS VFS: Error connecting to socket. Aborting operation.
[ 114.666083] CIFS VFS: cifs_mount failed w/return code = -113
[ 114.832417] systemd-journald[220]: Received request to flush runtime
journal from PID 1
[ 117.375353] nvidia 0000:01:00.0: irq 57 for MSI/MSI-X
[ 118.006626] tun: Universal TUN/TAP device driver, 1.6
[ 118.006628] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 137.998711] usb 1-10: new low-speed USB device number 7 using xhci_hcd
[ 138.188074] usb 1-10: New USB device found, idVendor=1c4f, idProduct=000e
[ 138.188076] usb 1-10: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 138.188077] usb 1-10: Product: USB Keykoard
[ 138.188078] usb 1-10: Manufacturer: SIGMACH1P
[ 138.188214] usb 1-10: ep 0x81 - rounding interval to 64 microframes,
ep desc says 80 microframes
[ 138.188216] usb 1-10: ep 0x82 - rounding interval to 64 microframes,
ep desc says 80 microframes
[ 138.190834] input: SIGMACH1P USB Keykoard as
/devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.0/0003:1C4F:000E.0003/input/input11
[ 138.190918] hid-generic 0003:1C4F:000E.0003: input,hidraw2: USB HID
v1.10 Keyboard [SIGMACH1P USB Keykoard] on usb-0000:00:14.0-10/input0
[ 148.192461] hid-generic 0003:1C4F:000E.0004: usb_submit_urb(ctrl)
failed: -1
[ 148.192476] hid-generic 0003:1C4F:000E.0004: timeout initializing reports
[ 148.192536] input: SIGMACH1P USB Keykoard as
/devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.1/0003:1C4F:000E.0004/input/input12
[ 148.192607] hid-generic 0003:1C4F:000E.0004: input,hidraw3: USB HID
v1.10 Device [SIGMACH1P USB Keykoard] on usb-0000:00:14.0-10/input1
[ 186.946700] usb 1-1: new full-speed USB device number 8 using xhci_hcd
[ 187.075744] usb 1-1: New USB device found, idVendor=05e3, idProduct=0606
[ 187.075746] usb 1-1: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 187.075747] usb 1-1: Product: USB Hub 2.0
[ 187.075748] usb 1-1: Manufacturer: ALCOR
[ 187.075825] usb 1-1: ep 0x81 - rounding interval to 1024 microframes,
ep desc says 2040 microframes
[ 187.076355] hub 1-1:1.0: USB hub found
[ 187.076453] hub 1-1:1.0: 4 ports detected
[ 187.346863] usb 1-1.1: new full-speed USB device number 9 using xhci_hcd
[ 187.447497] usb 1-1.1: not running at top speed; connect to a high
speed hub
[ 187.552323] usb 1-1.1: New USB device found, idVendor=046d,
idProduct=0825
[ 187.552325] usb 1-1.1: New USB device strings: Mfr=0, Product=0,
SerialNumber=2
[ 187.552326] usb 1-1.1: SerialNumber: 9F617310
[ 187.557792] media: Linux media interface: v0.10
[ 187.559974] Linux video capture interface: v2.00
[ 187.665762] usb 1-1.1: set resolution quirk: cval->res = 384
[ 187.665917] usbcore: registered new interface driver snd-usb-audio
[ 187.665942] uvcvideo: Found UVC 1.00 device <unnamed> (046d:0825)
[ 187.680593] input: UVC Camera (046d:0825) as
/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input13
[ 187.680667] usbcore: registered new interface driver uvcvideo
[ 187.680669] USB Video Class driver (1.1.1)
[ 194.922455] usb 1-2: new full-speed USB device number 10 using xhci_hcd
[ 195.052287] usb 1-2: New USB device found, idVendor=062a, idProduct=3632
[ 195.052289] usb 1-2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 195.052290] usb 1-2: Product: Full-Speed Mouse
[ 195.052291] usb 1-2: Manufacturer: Full-Speed Mouse
[ 195.054104] input: Full-Speed Mouse Full-Speed Mouse as
/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:062A:3632.0005/input/input14
[ 195.054322] hid-generic 0003:062A:3632.0005: input,hiddev0,hidraw4:
USB HID v1.10 Mouse [Full-Speed Mouse Full-Speed Mouse] on
usb-0000:00:14.0-2/input0
[ 203.698601] usb 1-9: new full-speed USB device number 11 using xhci_hcd
[ 203.827173] usb 1-9: New USB device found, idVendor=041e, idProduct=30d3
[ 203.827175] usb 1-9: New USB device strings: Mfr=0, Product=0,
SerialNumber=2
[ 203.827177] usb 1-9: SerialNumber: 140428000087
[ 203.836195] input: HID 041e:30d3 as
/devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.3/0003:041E:30D3.0006/input/input15
[ 203.836266] hid-generic 0003:041E:30D3.0006: input,hidraw5: USB HID
v1.00 Device [HID 041e:30d3] on usb-0000:00:14.0-9/input3
Reply to: