Re: UPS SVEN Pro500+
root@omega:~# /lib/nut/megatec_usb -a sven -DDDDD
Network UPS Tools 2.2.2 - Megatec protocol driver 1.5.14 [megatec_usb]
Carlos Rodrigues (c) 2003-2008
Serial-over-USB transport layer for Megatec protocol driver [megatec_usb]
Andrey Lelikov (c) 2006, Alexander Gordeev (c) 2006-2007, Jon Gough (c) 2007
debug level is '5'
Checking device (1D6B/0002) (005/001)
- VendorID: 1d6b
- ProductID: 0002
- Manufacturer: unknown
- Product: unknown
- Serial Number: unknown
- Bus: 005
Trying to match device
Device does not match - skipping
Checking device (1D6B/0001) (004/001)
- VendorID: 1d6b
- ProductID: 0001
- Manufacturer: unknown
- Product: unknown
- Serial Number: unknown
- Bus: 004
Trying to match device
Device does not match - skipping
Checking device (1D6B/0001) (003/001)
- VendorID: 1d6b
- ProductID: 0001
- Manufacturer: unknown
- Product: unknown
- Serial Number: unknown
- Bus: 003
Trying to match device
Device does not match - skipping
Checking device (1D6B/0001) (002/001)
- VendorID: 1d6b
- ProductID: 0001
- Manufacturer: unknown
- Product: unknown
- Serial Number: unknown
- Bus: 002
Trying to match device
Device does not match - skipping
Checking device (0925/1234) (001/004)
- VendorID: 0925
- ProductID: 1234
- Manufacturer: ?
- Product: UPS USB MON V1.4
- Serial Number: unknown
- Bus: 001
Trying to match device
Device does not match - skipping
Checking device (1D6B/0001) (001/001)
- VendorID: 1d6b
- ProductID: 0001
- Manufacturer: unknown
- Product: unknown
- Serial Number: unknown
- Bus: 001
Trying to match device
Device does not match - skipping
No appropriate HID device found
No supported devices found. Please check your device availability with
'lsusb'
and make sure you have an up-to-date version of NUT. If this does not help,
try running the driver with at least 'vendorid' and 'subdriver' options
specified. Please refer to the man page for details about these options
(man 8 megatec_usb).
Please report your results to the NUT user's mailing list
<nut-upsuser@lists.alioth.debian.org>.
cat /etc/nut/ups.conf
[sven]
driver = megatec_usb
port = auto
desc = "test"
В общем не работает. nut из lenny.
--
WBR, Andrey N. Prokofiev
IT department of the Korona Auto Ltd.
Jabber ID: andy@korona-auto.com
E-mail: andy@korona-auto.com
Work Phone: +7-812-640-56-01 (ext. 100)
Reply to: