Re: Торрент клиент.

[Ekimov Alexandr <toekimov@gmail.com>]

В сообщении от Среда 21 апреля 2010 19:02:07 автор Andrey Melnikoff написал:
> Иван Лох <loh@1917.com> wrote:
> > On Wed, Apr 21, 2010 at 12:18:01AM +0400, Andrey Melnikoff wrote:
> > > Увы, rtorrent унылое г-но. По крайней мере - на быстрых каналах. deluge
> > > у меня отдает со скоростью под 7 мегабит, rtorrent никогда не выжимал
> > > больше 1. Ну и с закачкай - та-же хистори.
> >
> > У всех же качает и 7 мегабит и 17. Только канал давай.
> 
> Специально проверил - поставил rt 0.8.6, librt 0.12.6 и качал iso'шки
>  Ubuntu.
> 
> rtorrent на 50% разогнался до 4 мегабит, и больше не поднимался.
> deluge - на 25% разогнался до 7 мегабит, к 80% набрал 9 мегабит, так и
>  закончил.
Либо дефолтные настройки rtorrent плохи, либо что-то другое. Для сравнения 
скоростей rtorrent и  ktorrent по очереди поставил на закачку 
http://rutracker.org/forum/viewtopic.php?t=2254842 (выбрал случайно, просто 
чтобы раздающих много было)
Оба, и rtorrent и ktorrent  после минутного "разгона" показали 9 мегабит. 
Настройки rtorrent во вложении.
> 
> Да - из 300 пиров - только один раздает rtorrent'ом, всей остальное -
> uTorrent, Azeurus, Transmission, Deluge (в порядке убывания).
Это тут вообще причем? Пользователей Линукс на десктопах пару процентов, из 
них консольные приблуды любит только какая-то часть.
> 
> Ы? Доктор, что я делаю не так ? Где засилие быстрого rtorrent'a на
>  раздачах?
Ваша же проблема. Вам и решать. Я думаю как-нибудь буду продолжать жить дальше 
даже если rtorrent вообще у вас работать перестанет. :)
> 

# This is an example resource file for rTorrent. Copy to
# ~/.rtorrent.rc and enable/modify the options as needed. Remember to
# uncomment the options you wish to enable.

# Maximum and minimum number of peers to connect to per torrent.
#min_peers = 40
max_peers = 1000

# Same as above but for seeding completed torrents (-1 = same as downloading)
#min_peers_seed = 10
max_peers_seed = 1000

# Maximum number of simultanious uploads per torrent.
max_uploads = 1000

# Global upload and download rate in KiB. "0" for unlimited.
download_rate = 0
upload_rate = 0

# Default directory to save the downloaded torrents.
directory = ./MyDownloads/

# Default session directory. Make sure you don't run multiple instance
# of rtorrent using the same session directory. Perhaps using a
# relative path?
session = ./session

# Watch a directory for new torrents, and stop those that have been
# deleted.
schedule = watch_directory,5,5,load_start=./watch/*.torrent
#schedule = untied_directory,5,5,stop_untied=

# Close torrents when diskspace is low.
#schedule = low_diskspace,5,60,close_low_diskspace=100M

# Stop torrents when reaching upload ratio in percent,
# when also reaching total upload in bytes, or when
# reaching final upload ratio in percent.
# example: stop at ratio 2.0 with at least 200 MB uploaded, or else ratio 20.0
#schedule = ratio,60,60,stop_on_ratio=200,200M,2000

# The ip address reported to the tracker.
#ip = 127.0.0.1
#ip = rakshasa.no

# The ip address the listening socket and outgoing connections is
# bound to.
#bind = 127.0.0.1
#bind = rakshasa.no

# Port range to use for listening.
port_range = 6890-6900

# Start opening ports at a random position within the port range.
#port_random = no

# Check hash for finished torrents. Might be usefull until the bug is
# fixed that causes lack of diskspace not to be properly reported.
check_hash = yes

# Set whetever the client should try to connect to UDP trackers.
use_udp_trackers = yes
dht = auto

# UDP port to use for DHT. 
# 
dht_port = 6881
peer_exchange=yes
# Alternative calls to bind and ip that should handle dynamic ip's.
#schedule = ip_tick,0,1800,ip=rakshasa
#schedule = bind_tick,0,1800,bind=rakshasa

# Encryption options, set to none (default) or any combination of the following:
# allow_incoming, try_outgoing, require, require_RC4, enable_retry, prefer_plaintext
#
# The example value allows incoming encrypted connections, starts unencrypted
# outgoing connections but retries with encryption if they fail, preferring
# plaintext to RC4 encryption after the encrypted handshake
#
#encryption = allow_incoming, try_outgoing
encryption = allow_incoming,enable_retry,prefer_plaintext

#
# Do not modify the following parameters unless you know what you're doing.
#

# Hash read-ahead controls how many MB to request the kernel to read
# ahead. If the value is too low the disk may not be fully utilized,
# while if too high the kernel might not be able to keep the read
# pages in memory thus end up trashing.
#hash_read_ahead = 10

# Interval between attempts to check the hash, in milliseconds.
#hash_interval = 100

# Number of attempts to check the hash while using the mincore status,
# before forcing. Overworked systems might need lower values to get a
# decent hash checking rate.
#hash_max_tries = 10

# Max number of files to keep open simultaniously.
#max_open_files = 128

# Number of sockets to simultaneously keep open.
#max_open_sockets = <no default>


# Example of scheduling commands: Switch between two ip's every 5
# seconds.
#schedule = "ip_tick1,5,10,ip=torretta"
#schedule = "ip_tick2,10,10,ip=lampedusa"

# Remove a scheduled event.
#schedule_remove = "ip_tick1"