lenny+xen и неколько сетевых карт
Доброго времени суток.
Наткнулся на проблему. Такое проявилось на двух разных машинах x86 и amd64.
Материнские платы с интегрированной сетевой (RTL8111/8168B PCI Express
Gigabit Ethernet controller, другая VT6105/VT6106S [Rhine-III]) и
RTL8139D, DL10028A
при загрузке на
[ 9.180935] pnp: the driver 'parport_pc' has been registered
[ 9.180935] parport_pc 0:07: reported by Plug and Play ACPI
[ 9.180935] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 9.268486] parport_pc 00:07: driver attached
секунд на 10ть подвисает. после этого грузимся. и в при ifconfig'e получаем
один работаспособный интерфейс и один интерфейс eth0_rename
пробовал отключать в BIOS'e Plug&Play, ACPI но эффект тот же
kernel: 2.6.26-1-xen-amd64
debian lenny 5.0
в аттаче полный dmesg
Что не так делаю?
P.S. А то что xen'ское x86 ядро не создает initramfs это бага?
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.26-1-xen-amd64 (Debian 2.6.26-12) (waldi@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-24)) #1 SMP Mon Dec 15 20:07:26 UTC 2008
[ 0.000000] Command line: root=/dev/mapper/sys-root ro console=tty0
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] Xen: 0000000000000000 - 0000000067182000 (usable)
[ 0.000000] Entering add_active_range(0, 0, 422274) 0 entries of 256 used
[ 0.000000] max_pfn_mapped = 422274
[ 0.000000] init_memory_mapping
[ 0.000000] DMI present.
[ 0.000000] Entering add_active_range(0, 0, 422274) 0 entries of 256 used
[ 0.000000] early res: 0 [200000-631917] TEXT DATA BSS
[ 0.000000] early res: 1 [632000-1e58fff] Xen provided
[ 0.000000] early res: 2 [1e59000-1e59fff] INITMAP
[ 0.000000] early res: 3 [1e5a000-2196fff] PGTABLE
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1048576
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 422274
[ 0.000000] On node 0 totalpages: 422274
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4040 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 5718 pages used for memmap
[ 0.000000] DMA32 zone: 412460 pages, LIFO batch:31
[ 0.000000] Normal zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: RSDP 000FB520, 0024 (r2 ACPIAM)
[ 0.000000] ACPI: XSDT 6FF80100, 0054 (r1 081408 XSDT1624 20080814 MSFT 97)
[ 0.000000] ACPI: FACP 6FF80290, 00F4 (r3 081408 FACP1624 20080814 MSFT 97)
[ 0.000000] ACPI: DSDT 6FF805C0, A16C (r1 A0901 A0901001 1 INTL 20051117)
[ 0.000000] ACPI: FACS 6FF8E000, 0040
[ 0.000000] ACPI: APIC 6FF80390, 006C (r1 081408 APIC1624 20080814 MSFT 97)
[ 0.000000] ACPI: MCFG 6FF80400, 003C (r1 081408 OEMMCFG 20080814 MSFT 97)
[ 0.000000] ACPI: OEMB 6FF8E040, 0071 (r1 081408 OEMB1624 20080814 MSFT 97)
[ 0.000000] ACPI: HPET 6FF8A730, 0038 (r1 081408 OEMHPET 20080814 MSFT 97)
[ 0.000000] ACPI: SSDT 6FF8A770, 030E (r1 A_M_I_ POWERNOW 1 AMD 1)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Setting APIC routing to xen
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 70000000:8f700000)
[ 0.000000] PERCPU: Allocating 22192 bytes of per cpu data
[ 0.000000] NR_CPUS: 32, nr_cpu_ids: 2
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 416500
[ 0.000000] Kernel command line: root=/dev/mapper/sys-root ro console=tty0
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Xen reported: 2913.546 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] console [hvc-1] enabled
[ 0.004000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.004000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.004000] Software IO TLB enabled:
[ 0.004000] Aperture: 2 megabytes
[ 0.004000] Kernel range: ffff880003b76000 - ffff880003d76000
[ 0.004000] Address size: 22 bits
[ 0.004000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.004000] Memory: 1619876k/1689096k available (2277k kernel code, 60896k reserved, 1020k data, 216k init)
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.280021] Calibrating delay using timer specific routine.. 5829.20 BogoMIPS (lpj=11658417)
[ 0.280188] Security Framework initialized
[ 0.280256] SELinux: Disabled at boot.
[ 0.280320] Capability LSM initialized
[ 0.280399] Mount-cache hash table entries: 256
[ 0.280589] Initializing cgroup subsys ns
[ 0.280657] Initializing cgroup subsys cpuacct
[ 0.280721] Initializing cgroup subsys devices
[ 0.280804] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.280869] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.280933] CPU: Physical Processor ID: 0
[ 0.280996] CPU: Processor Core ID: 0
[ 0.281068] SMP alternatives: switching to UP code
[ 0.287728] ACPI: Core revision 20080321
[ 0.298758] SMP alternatives: switching to SMP code
[ 0.305691] Brought up 2 CPUs
[ 0.305691] Initializing CPU#1
[ 0.305691] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.305691] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.305691] CPU: Physical Processor ID: 0
[ 0.305691] CPU: Processor Core ID: 1
[ 0.306070] CPU0 attaching sched-domain:
[ 0.306073] domain 0: span 0-1
[ 0.306075] groups: 0 1
[ 0.306078] CPU1 attaching sched-domain:
[ 0.306080] domain 0: span 0-1
[ 0.306081] groups: 1 0
[ 0.310096] net_namespace: 1224 bytes
[ 0.313675] NET: Registered protocol family 16
[ 0.313675] node 0 link 0: io port [1000, ffffff]
[ 0.313675] TOM: 0000000080000000 aka 2048M
[ 0.313675] node 0 link 0: mmio [a0000, bffff]
[ 0.313675] node 0 link 0: mmio [80000000, cfffffff]
[ 0.313675] node 0 link 0: mmio [d0000000, efffffff]
[ 0.313675] node 0 link 0: mmio [f0000000, fbcfffff]
[ 0.313675] node 0 link 0: mmio [fbd00000, fbdfffff]
[ 0.313675] node 0 link 0: mmio [fbe00000, ffefffff]
[ 0.313675] bus: [00,07] on node 0 link 0
[ 0.313675] bus: 00 index 0 io port: [0, ffff]
[ 0.313675] bus: 00 index 1 mmio: [a0000, bffff]
[ 0.313675] bus: 00 index 2 mmio: [80000000, fcffffffff]
[ 0.313675] ACPI: bus type pci registered
[ 0.313675] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.313675] PCI: Not using MMCONFIG.
[ 0.313675] PCI: Using configuration type 1 for base access
[ 0.317675] ACPI: EC: Look up EC in DSDT
[ 0.326206] ACPI: Interpreter enabled
[ 0.326206] ACPI: (supports S0 S1 S3 S5)
[ 0.328990] ACPI: Using IOAPIC for interrupt routing
[ 0.329044] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.334812] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.461330] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.472678] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.472678] pci 0000:00:11.0: set SATA to AHCI mode
[ 0.474958] PCI: Transparent bridge - 0000:00:14.4
[ 0.475072] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.475438] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.475536] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT]
[ 0.475643] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
[ 0.480226] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 *10 11 12 14 15)
[ 0.480678] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 12 14 15)
[ 0.480678] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15)
[ 0.480678] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 12 14 15)
[ 0.480678] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.483104] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.483913] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 *11 12 14 15)
[ 0.484609] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.486080] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 3C, should be 2F [20080321]
[ 0.486268] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.486268] pnp: PnP ACPI init
[ 0.486268] ACPI: bus type pnp registered
[ 0.486268] pnp 00:00: parse allocated resources
[ 0.486268] pnp 00:00: add io 0xcf8-0xcff flags 0x1
[ 0.486268] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.486268] pnp 00:01: parse allocated resources
[ 0.486458] pnp 00:01: add mem 0x0-0xffffffffffffffff flags 0x10000000
[ 0.486460] pnp 00:01: add mem 0x70000000-0x7fffffff flags 0x0
[ 0.486463] pnp 00:01: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c
[ 0.486536] pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.486569] pnp 00:02: parse allocated resources
[ 0.486574] pnp 00:02: add dma 4 flags 0x4
[ 0.486576] pnp 00:02: add io 0x0-0xf flags 0x1
[ 0.486577] pnp 00:02: add io 0x81-0x83 flags 0x1
[ 0.486579] pnp 00:02: add io 0x87-0x87 flags 0x1
[ 0.486581] pnp 00:02: add io 0x89-0x8b flags 0x1
[ 0.486582] pnp 00:02: add io 0x8f-0x8f flags 0x1
[ 0.486584] pnp 00:02: add io 0xc0-0xdf flags 0x1
[ 0.486641] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.486653] pnp 00:03: parse allocated resources
[ 0.486657] pnp 00:03: add io 0x70-0x71 flags 0x1
[ 0.486666] pnp 00:03: add irq 8 flags 0x1
[ 0.486953] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.486964] pnp 00:04: parse allocated resources
[ 0.486967] pnp 00:04: add io 0x61-0x61 flags 0x1
[ 0.487251] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.487263] pnp 00:05: parse allocated resources
[ 0.487267] pnp 00:05: add io 0xf0-0xff flags 0x1
[ 0.487270] pnp 00:05: add irq 13 flags 0x1
[ 0.487556] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.487948] pnp 00:06: parse allocated resources
[ 0.488435] pnp 00:06: add io 0x3f0-0x3f5 flags 0x1
[ 0.488436] pnp 00:06: add io 0x3f7-0x3f7 flags 0x1
[ 0.488444] pnp 00:06: add irq 6 flags 0x1
[ 0.488445] pnp 00:06: add dma 2 flags 0x0
[ 0.488447] pnp 00:06: parse resource options
[ 0.488448] pnp 00:06: new independent option
[ 0.488454] pnp 00:06: new dependent option (priority 0x0)
[ 0.488456] pnp 00:06: io min 0x3f0 max 0x3f0 align 1 size 6 flags 0x1
[ 0.488458] pnp 00:06: io min 0x3f7 max 0x3f7 align 1 size 1 flags 0x1
[ 0.488462] pnp 00:06: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000040 flags 0x1
[ 0.488465] pnp 00:06: dma bitmask 0x4 flags 0x0
[ 0.488466] pnp 00:06: new dependent option (priority 0x1)
[ 0.488468] pnp 00:06: io min 0x3f0 max 0x3f0 align 1 size 6 flags 0x1
[ 0.488470] pnp 00:06: io min 0x3f7 max 0x3f7 align 1 size 1 flags 0x1
[ 0.488474] pnp 00:06: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001cf8 flags 0x1
[ 0.488476] pnp 00:06: dma bitmask 0xf flags 0x0
[ 0.488477] pnp 00:06: new dependent option (priority 0x1)
[ 0.488479] pnp 00:06: io min 0x370 max 0x370 align 1 size 6 flags 0x1
[ 0.488481] pnp 00:06: io min 0x377 max 0x377 align 1 size 1 flags 0x1
[ 0.488484] pnp 00:06: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001cf8 flags 0x1
[ 0.488487] pnp 00:06: dma bitmask 0xf flags 0x0
[ 0.488488] pnp 00:06: end dependent options
[ 0.488771] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.489145] pnp 00:07: parse allocated resources
[ 0.489878] pnp 00:07: add io 0x378-0x37f flags 0x1
[ 0.489885] pnp 00:07: add irq 7 flags 0x1
[ 0.489886] pnp 00:07: parse resource options
[ 0.489888] pnp 00:07: new independent option
[ 0.490236] pnp 00:07: new dependent option (priority 0x1)
[ 0.490238] pnp 00:07: io min 0x378 max 0x378 align 1 size 8 flags 0x1
[ 0.490241] pnp 00:07: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001cf8 flags 0x1
[ 0.490244] pnp 00:07: new dependent option (priority 0x1)
[ 0.490246] pnp 00:07: io min 0x278 max 0x278 align 1 size 8 flags 0x1
[ 0.490249] pnp 00:07: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001cf8 flags 0x1
[ 0.490251] pnp 00:07: new dependent option (priority 0x1)
[ 0.490253] pnp 00:07: io min 0x3bc max 0x3bc align 1 size 4 flags 0x1
[ 0.490256] pnp 00:07: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001cf8 flags 0x1
[ 0.490258] pnp 00:07: end dependent options
[ 0.490268] pnp 00:07: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.490268] pnp 00:08: parse allocated resources
[ 0.490268] pnp 00:08: add mem 0xfed00000-0xfed003ff flags 0x0
[ 0.490268] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.490268] pnp 00:09: parse allocated resources
[ 0.490268] pnp 00:09: add io 0x3f8-0x3ff flags 0x1
[ 0.490268] pnp 00:09: add irq 4 flags 0x1
[ 0.490268] pnp 00:09: parse resource options
[ 0.490268] pnp 00:09: new independent option
[ 0.490304] pnp 00:09: new dependent option (priority 0x0)
[ 0.490304] pnp 00:09: io min 0x3f8 max 0x3f8 align 1 size 8 flags 0x1
[ 0.490304] pnp 00:09: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000010 flags 0x1
[ 0.490304] pnp 00:09: new dependent option (priority 0x1)
[ 0.490304] pnp 00:09: io min 0x3f8 max 0x3f8 align 1 size 8 flags 0x1
[ 0.490304] pnp 00:09: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001cf8 flags 0x1
[ 0.490304] pnp 00:09: new dependent option (priority 0x1)
[ 0.490304] pnp 00:09: io min 0x2f8 max 0x2f8 align 1 size 8 flags 0x1
[ 0.490304] pnp 00:09: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001cf8 flags 0x1
[ 0.490304] pnp 00:09: new dependent option (priority 0x1)
[ 0.490304] pnp 00:09: io min 0x3e8 max 0x3e8 align 1 size 8 flags 0x1
[ 0.490304] pnp 00:09: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001cf8 flags 0x1
[ 0.490304] pnp 00:09: new dependent option (priority 0x1)
[ 0.490304] pnp 00:09: io min 0x2e8 max 0x2e8 align 1 size 8 flags 0x1
[ 0.490304] pnp 00:09: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001cf8 flags 0x1
[ 0.490304] pnp 00:09: new dependent option (priority 0x1)
[ 0.490304] pnp 00:09: io min 0x3f8 max 0x3f8 align 1 size 8 flags 0x1
[ 0.490304] pnp 00:09: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001cf8 flags 0x1
[ 0.490304] pnp 00:09: dma bitmask 0xf flags 0x0
[ 0.490304] pnp 00:09: new dependent option (priority 0x1)
[ 0.490304] pnp 00:09: io min 0x2f8 max 0x2f8 align 1 size 8 flags 0x1
[ 0.490304] pnp 00:09: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001cf8 flags 0x1
[ 0.490304] pnp 00:09: dma bitmask 0xf flags 0x0
[ 0.490304] pnp 00:09: new dependent option (priority 0x1)
[ 0.490304] pnp 00:09: io min 0x3e8 max 0x3e8 align 1 size 8 flags 0x1
[ 0.490304] pnp 00:09: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001cf8 flags 0x1
[ 0.490304] pnp 00:09: dma bitmask 0xf flags 0x0
[ 0.490304] pnp 00:09: new dependent option (priority 0x1)
[ 0.490304] pnp 00:09: io min 0x2e8 max 0x2e8 align 1 size 8 flags 0x1
[ 0.490304] pnp 00:09: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001cf8 flags 0x1
[ 0.490304] pnp 00:09: dma bitmask 0xf flags 0x0
[ 0.490304] pnp 00:09: end dependent options
[ 0.490304] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.490304] pnp 00:0a: parse allocated resources
[ 0.490914] pnp 00:0a: add io 0x60-0x60 flags 0x0
[ 0.490916] pnp 00:0a: add io 0x64-0x64 flags 0x0
[ 0.490918] pnp 00:0a: add mem 0xfec00000-0xfec00fff flags 0x0
[ 0.490920] pnp 00:0a: add mem 0xfee00000-0xfee00fff flags 0x0
[ 0.490922] pnp 00:0a: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c
[ 0.491232] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.491244] pnp 00:0b: parse allocated resources
[ 0.491371] pnp 00:0b: add io 0x10-0x1f flags 0x1
[ 0.491373] pnp 00:0b: add io 0x22-0x3f flags 0x1
[ 0.491375] pnp 00:0b: add io 0x62-0x63 flags 0x1
[ 0.491376] pnp 00:0b: add io 0x65-0x6f flags 0x1
[ 0.491378] pnp 00:0b: add io 0x72-0x7f flags 0x1
[ 0.491379] pnp 00:0b: add io 0x80-0x80 flags 0x1
[ 0.491381] pnp 00:0b: add io 0x84-0x86 flags 0x1
[ 0.491382] pnp 00:0b: add io 0x88-0x88 flags 0x1
[ 0.491384] pnp 00:0b: add io 0x8c-0x8e flags 0x1
[ 0.491386] pnp 00:0b: add io 0x90-0x9f flags 0x1
[ 0.491387] pnp 00:0b: add io 0xa2-0xbf flags 0x1
[ 0.491389] pnp 00:0b: add io 0xb1-0xb1 flags 0x1
[ 0.491390] pnp 00:0b: add io 0xe0-0xef flags 0x1
[ 0.491392] pnp 00:0b: add io 0x4d0-0x4d1 flags 0x1
[ 0.491394] pnp 00:0b: add io 0x40b-0x40b flags 0x1
[ 0.491395] pnp 00:0b: add io 0x4d6-0x4d6 flags 0x1
[ 0.491397] pnp 00:0b: add io 0xc00-0xc01 flags 0x1
[ 0.491399] pnp 00:0b: add io 0xc14-0xc14 flags 0x1
[ 0.491400] pnp 00:0b: add io 0xc50-0xc51 flags 0x1
[ 0.491402] pnp 00:0b: add io 0xc52-0xc52 flags 0x1
[ 0.491404] pnp 00:0b: add io 0xc6c-0xc6c flags 0x1
[ 0.491405] pnp 00:0b: add io 0xc6f-0xc6f flags 0x1
[ 0.491407] pnp 00:0b: add io 0xcd0-0xcd1 flags 0x1
[ 0.491409] pnp 00:0b: add io 0xcd2-0xcd3 flags 0x1
[ 0.491410] pnp 00:0b: add io 0xcd4-0xcd5 flags 0x1
[ 0.491412] pnp 00:0b: add io 0xcd6-0xcd7 flags 0x1
[ 0.491414] pnp 00:0b: add io 0xcd8-0xcdf flags 0x1
[ 0.491416] pnp 00:0b: add io 0xb00-0xb3f flags 0x1
[ 0.491417] pnp 00:0b: add io 0x800-0x89f flags 0x1
[ 0.491419] pnp 00:0b: add io 0xb20-0xb2f flags 0x1
[ 0.491421] pnp 00:0b: add io 0x0-0xffffffffffffffff flags 0x10000001
[ 0.491423] pnp 00:0b: add io 0x900-0x90f flags 0x1
[ 0.491425] pnp 00:0b: add io 0x910-0x91f flags 0x1
[ 0.491427] pnp 00:0b: add io 0xfe00-0xfefe flags 0x1
[ 0.491428] pnp 00:0b: add mem 0xffb80000-0xffbfffff flags 0x0
[ 0.491430] pnp 00:0b: add mem 0xfec10000-0xfec1001f flags 0x0
[ 0.491432] pnp 00:0b: add mem 0xfed40000-0xfed44fff flags 0x0
[ 0.491434] pnp 00:0b: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c
[ 0.491738] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.491750] pnp 00:0c: parse allocated resources
[ 0.491982] pnp 00:0c: add io 0x0-0xffffffffffffffff flags 0x10000001
[ 0.491984] pnp 00:0c: add io 0x230-0x23f flags 0x1
[ 0.491986] pnp 00:0c: add io 0x290-0x29f flags 0x1
[ 0.491987] pnp 00:0c: add io 0xa20-0xa2f flags 0x1
[ 0.491989] pnp 00:0c: add io 0xa30-0xa3f flags 0x1
[ 0.491991] pnp 00:0c: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c
[ 0.492294] pnp 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.492344] pnp 00:0d: parse allocated resources
[ 0.492402] pnp 00:0d: add mem 0xe0000000-0xefffffff flags 0x0
[ 0.492404] pnp 00:0d: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c
[ 0.492705] pnp 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.493072] pnp 00:0e: parse allocated resources
[ 0.493247] pnp 00:0e: add mem 0x0-0x9ffff flags 0x1
[ 0.493248] pnp 00:0e: add mem 0xc0000-0xcffff flags 0x0
[ 0.493250] pnp 00:0e: add mem 0xe0000-0xfffff flags 0x0
[ 0.493252] pnp 00:0e: add mem 0x100000-0x6fffffff flags 0x1
[ 0.493254] pnp 00:0e: add mem 0xfed45000-0xffffffff flags 0x0
[ 0.493256] pnp 00:0e: PNP0c01: calling quirk_system_pci_resources+0x0/0x15c
[ 0.493573] pnp 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.493868] pnp: PnP ACPI: found 15 devices
[ 0.493949] ACPI: ACPI bus type pnp unregistered
[ 0.494299] xen_mem: Initialising balloon driver.
[ 0.494828] usbcore: registered new interface driver usbfs
[ 0.494829] usbcore: registered new interface driver hub
[ 0.494829] usbcore: registered new device driver usb
[ 0.494829] PCI: Using ACPI for IRQ routing
[ 0.511435] ACPI: RTC can wake from S4
[ 0.523364] pnp: the driver 'system' has been registered
[ 0.523375] system 00:01: iomem range 0x70000000-0x7fffffff has been reserved
[ 0.523443] system 00:01: driver attached
[ 0.523454] system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.523521] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.523587] system 00:0a: driver attached
[ 0.523593] system 00:0b: ioport range 0x4d0-0x4d1 has been reserved
[ 0.523660] system 00:0b: ioport range 0x40b-0x40b has been reserved
[ 0.523727] system 00:0b: ioport range 0x4d6-0x4d6 has been reserved
[ 0.523793] system 00:0b: ioport range 0xc00-0xc01 has been reserved
[ 0.525606] system 00:0b: ioport range 0xc14-0xc14 has been reserved
[ 0.525673] system 00:0b: ioport range 0xc50-0xc51 has been reserved
[ 0.525739] system 00:0b: ioport range 0xc52-0xc52 has been reserved
[ 0.525805] system 00:0b: ioport range 0xc6c-0xc6c has been reserved
[ 0.525872] system 00:0b: ioport range 0xc6f-0xc6f has been reserved
[ 0.525938] system 00:0b: ioport range 0xcd0-0xcd1 has been reserved
[ 0.526005] system 00:0b: ioport range 0xcd2-0xcd3 has been reserved
[ 0.526071] system 00:0b: ioport range 0xcd4-0xcd5 has been reserved
[ 0.526138] system 00:0b: ioport range 0xcd6-0xcd7 has been reserved
[ 0.526204] system 00:0b: ioport range 0xcd8-0xcdf has been reserved
[ 0.526270] system 00:0b: ioport range 0xb00-0xb3f has been reserved
[ 0.526336] system 00:0b: ioport range 0x800-0x89f has been reserved
[ 0.526403] system 00:0b: ioport range 0xb20-0xb2f has been reserved
[ 0.526470] system 00:0b: ioport range 0x900-0x90f has been reserved
[ 0.526536] system 00:0b: ioport range 0x910-0x91f has been reserved
[ 0.526603] system 00:0b: ioport range 0xfe00-0xfefe has been reserved
[ 0.526670] system 00:0b: iomem range 0xffb80000-0xffbfffff could not be reserved
[ 0.526742] system 00:0b: iomem range 0xfec10000-0xfec1001f has been reserved
[ 0.526808] system 00:0b: iomem range 0xfed40000-0xfed44fff has been reserved
[ 0.526829] system 00:0b: driver attached
[ 0.526829] system 00:0c: ioport range 0x230-0x23f has been reserved
[ 0.526829] system 00:0c: ioport range 0x290-0x29f has been reserved
[ 0.526829] system 00:0c: ioport range 0xa20-0xa2f has been reserved
[ 0.526829] system 00:0c: ioport range 0xa30-0xa3f has been reserved
[ 0.526829] system 00:0c: driver attached
[ 0.526829] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.526829] system 00:0d: driver attached
[ 0.526829] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
[ 0.526829] system 00:0e: iomem range 0xc0000-0xcffff has been reserved
[ 0.526898] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
[ 0.526964] system 00:0e: iomem range 0x100000-0x6fffffff could not be reserved
[ 0.527034] system 00:0e: iomem range 0xfed45000-0xffffffff could not be reserved
[ 0.527105] system 00:0e: driver attached
[ 0.528052] PCI: Bridge: 0000:00:01.0
[ 0.528118] IO window: d000-dfff
[ 0.528186] MEM window: 0xfbd00000-0xfbefffff
[ 0.528253] PREFETCH window: 0x00000000d0000000-0x00000000dfffffff
[ 0.528328] PCI: Bridge: 0000:00:06.0
[ 0.528395] IO window: e000-efff
[ 0.528466] MEM window: 0xfbf00000-0xfbffffff
[ 0.528534] PREFETCH window: 0x00000000faf00000-0x00000000faffffff
[ 0.528608] PCI: Bridge: 0000:00:14.4
[ 0.528674] IO window: disabled.
[ 0.528749] MEM window: disabled.
[ 0.528819] PREFETCH window: disabled.
[ 0.528950] ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 18 (level, low) -> IRQ 18
[ 0.529088] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 0.529141] NET: Registered protocol family 2
[ 0.571412] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.572041] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.573936] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.574508] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.574581] TCP reno registered
[ 0.583442] NET: Registered protocol family 1
[ 0.583604] checking if image is initramfs... it is
[ 0.602852] Freeing initrd memory: 21367k freed
[ 0.618065] audit: initializing netlink socket (disabled)
[ 0.618065] type=2000 audit(1230967741.606:1): initialized
[ 0.618065] VFS: Disk quotas dquot_6.5.1
[ 0.618065] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.618065] msgmni has been set to 3324
[ 0.618065] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.618065] io scheduler noop registered
[ 0.618065] io scheduler anticipatory registered
[ 0.618065] io scheduler deadline registered
[ 0.618065] io scheduler cfq registered (default)
[ 0.618065] pci 0000:01:05.0: Boot video device
[ 0.618065] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 0.618065] assign_interrupt_mode Found MSI capability
[ 0.618065] no ownder
[ 0.618065] map irq failed
[ 0.618065] Allocate Port Service[0000:00:06.0:pcie00]
[ 0.622193] Linux agpgart interface v0.103
[ 0.622193] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 0.622193] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.622193] pnp: the driver 'serial' has been registered
[ 0.622193] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.622193] serial 00:09: driver attached
[ 0.626191] brd: module loaded
[ 0.626191] input: Macintosh mouse button emulation as /class/input/input0
[ 0.626191] Xen virtual console successfully installed as hvc0
[ 0.626191] Event-channel device installed.
[ 0.626191] netfront: Initialising virtual ethernet driver.
[ 0.626191] pnp: the driver 'i8042 kbd' has been registered
[ 0.626191] pnp: the driver 'i8042 aux' has been registered
[ 0.626191] pnp: the driver 'i8042 kbd' has been unregistered
[ 0.626191] pnp: the driver 'i8042 aux' has been unregistered
[ 0.626191] PNP: No PS/2 controller found. Probing ports directly.
[ 0.631042] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.631042] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.655236] mice: PS/2 mouse device common for all mice
[ 0.655364] pnp: the driver 'rtc_cmos' has been registered
[ 0.655459] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.655551] rtc0: alarms up to one month, y3k
[ 0.655615] rtc_cmos 00:03: driver attached
[ 0.655692] No iBFT detected.
[ 0.656089] TCP cubic registered
[ 0.656158] NET: Registered protocol family 17
[ 0.656514] registered taskstats version 1
[ 0.656732] rtc_cmos 00:03: setting system clock to 2009-01-03 07:29:01 UTC (1230967741)
[ 0.656810] Freeing unused kernel memory: 216k freed
[ 0.768349] ACPI: ACPI0007:00 is registered as cooling_device0
[ 0.768426] ACPI: Processor [P001] (supports 8 throttling states)
[ 0.768903] ACPI: ACPI0007:01 is registered as cooling_device1
[ 0.769269] ACPI: ACPI0007:02 is registered as cooling_device2
[ 0.769648] ACPI: ACPI0007:03 is registered as cooling_device3
[ 1.078714] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.078759] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 1.078932] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 1.079140] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 1
[ 1.079263] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfbcfe000
[ 1.098032] No dock devices found.
[ 1.111174] SCSI subsystem initialized
[ 1.123221] libata version 3.00 loaded.
[ 1.139218] usb usb1: configuration #1 chosen from 1 choice
[ 1.139218] hub 1-0:1.0: USB hub found
[ 1.139218] hub 1-0:1.0: 3 ports detected
[ 1.146930] Uniform Multi-Platform E-IDE driver
[ 1.147014] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 1.206237] Floppy drive(s): fd0 is 1.44M
[ 1.206397] floppy0: Unable to grab DMA2 for the floppy driver
[ 1.227995] FDC 0 is a post-1991 82077
[ 1.243482] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.243563] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.243639] usb usb1: Product: OHCI Host Controller
[ 1.243708] usb usb1: Manufacturer: Linux 2.6.26-1-xen-amd64 ohci_hcd
[ 1.243779] usb usb1: SerialNumber: 0000:00:12.0
[ 1.246265] ACPI: PCI Interrupt 0000:00:12.1[A] -> GSI 16 (level, low) -> IRQ 16
[ 1.246265] ohci_hcd 0000:00:12.1: OHCI Host Controller
[ 1.246265] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 2
[ 1.246265] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfbcfd000
[ 1.302863] usb usb2: configuration #1 chosen from 1 choice
[ 1.302968] hub 2-0:1.0: USB hub found
[ 1.303055] hub 2-0:1.0: 3 ports detected
[ 1.404789] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.404859] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.404931] usb usb2: Product: OHCI Host Controller
[ 1.404996] usb usb2: Manufacturer: Linux 2.6.26-1-xen-amd64 ohci_hcd
[ 1.405063] usb usb2: SerialNumber: 0000:00:12.1
[ 1.405270] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 18 (level, low) -> IRQ 18
[ 1.405431] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.405535] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 3
[ 1.405630] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfbcfc000
[ 1.462837] usb usb3: configuration #1 chosen from 1 choice
[ 1.462929] hub 3-0:1.0: USB hub found
[ 1.463010] hub 3-0:1.0: 3 ports detected
[ 1.564833] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.564903] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.564973] usb usb3: Product: OHCI Host Controller
[ 1.565039] usb usb3: Manufacturer: Linux 2.6.26-1-xen-amd64 ohci_hcd
[ 1.565104] usb usb3: SerialNumber: 0000:00:13.0
[ 1.565271] ahci 0000:00:11.0: version 3.0
[ 1.565324] ACPI: PCI Interrupt 0000:00:11.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 2.568840] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 2.568910] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 2.571004] scsi0 : ahci
[ 2.571170] scsi1 : ahci
[ 2.571273] scsi2 : ahci
[ 2.571383] scsi3 : ahci
[ 2.571522] ata1: SATA max UDMA/133 abar m1024@0xfbcff800 port 0xfbcff900 irq 22
[ 2.571593] ata2: SATA max UDMA/133 abar m1024@0xfbcff800 port 0xfbcff980 irq 22
[ 2.571664] ata3: SATA max UDMA/133 abar m1024@0xfbcff800 port 0xfbcffa00 irq 22
[ 2.571734] ata4: SATA max UDMA/133 abar m1024@0xfbcff800 port 0xfbcffa80 irq 22
[ 2.892071] ata1: SATA link down (SStatus 0 SControl 300)
[ 3.228076] ata2: SATA link down (SStatus 0 SControl 300)
[ 3.564072] ata3: SATA link down (SStatus 0 SControl 300)
[ 3.900067] ata4: SATA link down (SStatus 0 SControl 300)
[ 3.916090] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 18 (level, low) -> IRQ 18
[ 3.916247] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 3.916365] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 4
[ 3.918201] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfbcfb000
[ 3.974163] usb usb4: configuration #1 chosen from 1 choice
[ 3.974257] hub 4-0:1.0: USB hub found
[ 3.974336] hub 4-0:1.0: 3 ports detected
[ 4.076141] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.076211] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.076281] usb usb4: Product: OHCI Host Controller
[ 4.076346] usb usb4: Manufacturer: Linux 2.6.26-1-xen-amd64 ohci_hcd
[ 4.076412] usb usb4: SerialNumber: 0000:00:13.1
[ 4.076691] ACPI: PCI Interrupt 0000:00:12.2[B] -> GSI 17 (level, low) -> IRQ 17
[ 4.076852] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 4.076990] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 5
[ 4.077151] ehci_hcd 0000:00:12.2: debug port 1
[ 4.077235] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfbcff000
[ 4.088164] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 4.088295] usb usb5: configuration #1 chosen from 1 choice
[ 4.088389] hub 5-0:1.0: USB hub found
[ 4.088468] hub 5-0:1.0: 6 ports detected
[ 4.192228] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.192303] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.192373] usb usb5: Product: EHCI Host Controller
[ 4.192439] usb usb5: Manufacturer: Linux 2.6.26-1-xen-amd64 ehci_hcd
[ 4.192505] usb usb5: SerialNumber: 0000:00:12.2
[ 4.195359] ACPI: PCI Interrupt 0000:00:13.2[B] -> GSI 19 (level, low) -> IRQ 19
[ 4.195518] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 4.195628] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 6
[ 4.195765] ehci_hcd 0000:00:13.2: debug port 1
[ 4.195845] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfbcfa800
[ 4.206012] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 4.206149] usb usb6: configuration #1 chosen from 1 choice
[ 4.206243] hub 6-0:1.0: USB hub found
[ 4.206324] hub 6-0:1.0: 6 ports detected
[ 4.310072] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.310145] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.310215] usb usb6: Product: EHCI Host Controller
[ 4.310280] usb usb6: Manufacturer: Linux 2.6.26-1-xen-amd64 ehci_hcd
[ 4.310346] usb usb6: SerialNumber: 0000:00:13.2
[ 4.310303] ACPI: PCI Interrupt 0000:00:14.5[C] -> GSI 18 (level, low) -> IRQ 18
[ 4.310461] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 4.310570] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
[ 4.310662] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfbcf9000
[ 4.368356] usb usb7: configuration #1 chosen from 1 choice
[ 4.368443] hub 7-0:1.0: USB hub found
[ 4.368525] hub 7-0:1.0: 2 ports detected
[ 4.470352] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.470423] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.470494] usb usb7: Product: OHCI Host Controller
[ 4.470561] usb usb7: Manufacturer: Linux 2.6.26-1-xen-amd64 ohci_hcd
[ 4.470627] usb usb7: SerialNumber: 0000:00:14.5
[ 4.470832] ATIIXP: IDE controller (0x1002:0x439c rev 0x00) at PCI slot 0000:00:14.1
[ 4.470925] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16
[ 4.471065] ATIIXP: not 100% native mode: will probe irqs later
[ 4.471145] ide0: BM-DMA at 0xff00-0xff07
[ 4.471229] ide1: BM-DMA at 0xff08-0xff0f
[ 4.471303] Probing IDE interface ide0...
[ 4.758682] hda: ST380011A, ATA DISK drive
[ 5.038670] hdb: ST340016A, ATA DISK drive
[ 5.094338] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 5.094771] hda: UDMA/100 mode selected
[ 5.095086] hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 5.095272] hdb: UDMA/100 mode selected
[ 5.095439] Probing IDE interface ide1...
[ 5.662337] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 5.669353] ide1 at 0x170-0x177,0x376 on irq 15
[ 5.674665] r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
[ 5.674794] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 18 (level, low) -> IRQ 18
[ 5.674948] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 5.675023] no ownder
[ 5.675094] map irq failed
[ 5.676658] r8169 0000:02:00.0: no MSI. Back to INTx.
[ 5.676658] eth0: RTL8168c/8111c at 0xffffc20000032000, 00:22:15:d3:f2:c5, XID 3c4000c0 IRQ 18
[ 5.740976] hda: max request size: 512KiB
[ 5.743739] hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=16383/255/63
[ 5.744442] hda: cache flushes supported
[ 5.744563] hda: hda1 hda2 hda3 hda4
[ 5.758989] hdb: max request size: 128KiB
[ 5.762147] hdb: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63
[ 5.762147] hdb: cache flushes not supported
[ 5.762147] hdb: hdb1
[ 6.145665] device-mapper: uevent: version 1.0.3
[ 6.145731] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
[ 6.315336] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 6.315408] EXT3-fs: write access will be enabled during recovery.
[ 6.657357] kjournald starting. Commit interval 5 seconds
[ 6.657444] EXT3-fs: recovery complete.
[ 6.658019] EXT3-fs: mounted filesystem with ordered data mode.
[ 7.943621] udevd version 125 started
[ 8.216177] udev: renamed network interface eth0 to eth1
[ 8.496670] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 8.504982] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 8.559996] ACPI: WMI: Mapper loaded
[ 8.771054] input: Power Button (FF) as /class/input/input1
[ 8.828011] ACPI: Power Button (FF) [PWRF]
[ 8.828163] input: Power Button (CM) as /class/input/input2
[ 8.892511] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
[ 8.893472] ACPI: Power Button (CM) [PWRB]
[ 9.048696] input: PC Speaker as /class/input/input3
[ 9.180935] pnp: the driver 'parport_pc' has been registered
[ 9.180935] parport_pc 00:07: reported by Plug and Play ACPI
[ 9.180935] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 9.268486] parport_pc 00:07: driver attached
[ 10.192995] Adding 3903784k swap on /dev/hda3. Priority:-1 extents:1 across:3903784k
[ 10.594120] EXT3 FS on dm-0, internal journal
[ 11.252509] loop: module loaded
[ 12.022968] kjournald starting. Commit interval 5 seconds
[ 12.023236] EXT3 FS on hda1, internal journal
[ 12.023360] EXT3-fs: mounted filesystem with ordered data mode.
Reply to: