Re: відеокрты nVidea 8600 GT и 9600 GT тормозит картинка киновильмов на больших размерах
Живой конфиг для X'ов для nvidia и двух мониторов (во вложении). В этой
конфигурации оба монитора являются "продолжением" друг друга
(слева-справа). Есть ещё вариант, когда мониторы раздельны (а
мышь-клавиатура общие).
Ключевое, как я понимаю:
Option "TwinView"
Option "MetaModes" "1680x1050, 1920x1080"
Option "TwinViewOrientation" "RightOf"
В Пнд, 14/12/2009 в 20:47 +0200, vanessa пишет:
> Константин написав(ла):
> > Приветствую.
> >
> >> Section "Device"
> > ...
> >> Driver "nv"
> > ...
> >
> > Мне кажется или у вас прописан свободный xorg-nv-драйвер?
> > Для работы проприетарных вроде бы надо писать (по собственному опыту
> > именно так):
> >
> > Driver "nvidia"
> >
> >
> >
> > Или?
> >
>
> Я в первом посте писал что ставил проприетарный драйвер, но не смог на
> нем включить второй монитор, хrandr говорит что видеовыход только один.
> да и с воспроизведением кино ситуация хоть и улучшилась но не сильно.
>
>
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder58) Fri Aug 14 18:33:37 PDT 2009
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
EndSection
Section "Files"
# path to defoma fonts
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/X11R6/lib/X11/fonts/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "true"
EndSection
Section "Monitor"
Identifier "Универсальный монитор"
HorizSync 28.0 - 84.0
VertRefresh 43.0 - 60.0
Option "DPMS"
EndSection
Section "Device"
Identifier "nVidia Corporation GeForce 7300 LE"
Driver "nvidia"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "nVidia Corporation GeForce 7300 LE"
Monitor "Универсальный монитор"
DefaultDepth 24
Option "TwinView"
Option "MetaModes" "1680x1050, 1920x1080"
Option "TwinViewOrientation" "RightOf"
SubSection "Display"
Depth 1
Modes "1680x1050" "1280x1024"
EndSubSection
SubSection "Display"
Depth 4
Modes "1680x1050" "1280x1024"
EndSubSection
SubSection "Display"
Depth 8
Modes "1680x1050" "1280x1024"
EndSubSection
SubSection "Display"
Depth 15
Modes "1680x1050" "1280x1024"
EndSubSection
SubSection "Display"
Depth 16
Modes "1680x1050" "1280x1024"
EndSubSection
SubSection "Display"
Depth 24
Modes "1680x1050" "1280x1024"
EndSubSection
EndSection
Reply to: