питер, корбина
Поможите люди добрые (с)
Как-то я в тупике. Конфиги и лог нижеследуют.
Проблема:
Dec 20 18:02:48 localhost xl2tpd[28973]: Connecting to host
tp.spb.corbina.net, port 1701
Dec 20 18:02:48 localhost xl2tpd[28973]: Connection established to
83.102.254.248, 1701. Local: 18599, Remote: 13349 (ref=0/0).
Dec 20 18:02:48 localhost xl2tpd[28973]: Calling on tunnel 18599
Dec 20 18:02:48 localhost xl2tpd[28973]: Call established with
83.102.254.248, Local: 44002, Remote: 6785, Serial: 3 (ref=0/0)
Dec 20 18:02:48 localhost xl2tpd[28973]: start_pppd: I'm running:
Dec 20 18:02:48 localhost xl2tpd[28973]: "/usr/sbin/pppd"
Dec 20 18:02:48 localhost xl2tpd[28973]: "passive"
Dec 20 18:02:48 localhost xl2tpd[28973]: "-detach"
Dec 20 18:02:48 localhost xl2tpd[28973]: ":"
Dec 20 18:02:48 localhost xl2tpd[28973]: "name"
Dec 20 18:02:48 localhost xl2tpd[28973]: "hokma"
Dec 20 18:02:48 localhost xl2tpd[28973]: "debug"
Dec 20 18:02:48 localhost xl2tpd[28973]: "file"
Dec 20 18:02:48 localhost xl2tpd[28973]: "/etc/ppp/options.xl2tpd"
Dec 20 18:02:48 localhost xl2tpd[28973]: "/dev/pts/4"
Dec 20 18:02:48 localhost pppd[28984]: pppd 2.4.4 started by root, uid 0
Dec 20 18:02:48 localhost pppd[28984]: Serial connection established.
Dec 20 18:02:48 localhost pppd[28984]: using channel 320
Dec 20 18:02:48 localhost pppd[28984]: Using interface ppp0
Dec 20 18:02:48 localhost pppd[28984]: Connect: ppp0 <--> /dev/pts/4
Dec 20 18:02:49 localhost pppd[28984]: sent [LCP ConfReq id=0x1 <mru 1460>
<asyncmap 0x0> <auth chap MD5> <magic 0x4b96b949>]
Dec 20 18:02:49 localhost pppd[28984]: rcvd [LCP ConfReq id=0x1 <asyncmap
0xa0000> <auth chap MD5> <magic 0xe7eda64a> <pcomp> <accom
p>]
Dec 20 18:02:49 localhost pppd[28984]: No auth is possible
Dec 20 18:02:49 localhost pppd[28984]: sent [LCP ConfRej id=0x1 <auth chap
MD5> <pcomp> <accomp>]
Dec 20 18:02:49 localhost pppd[28984]: rcvd [LCP ConfNak id=0x1 <mru 1500>]
Dec 20 18:02:49 localhost pppd[28984]: sent [LCP ConfReq id=0x2 <asyncmap
0x0> <auth chap MD5> <magic 0x4b96b949>]
Dec 20 18:02:49 localhost pppd[28984]: rcvd [LCP ConfReq id=0x2 <asyncmap
0xa0000> <auth chap MD5> <magic 0xe7eda64a>]
Dec 20 18:02:49 localhost pppd[28984]: No auth is possible
Dec 20 18:02:49 localhost pppd[28984]: sent [LCP ConfRej id=0x2 <auth chap MD5>]
Dec 20 18:02:49 localhost pppd[28984]: rcvd [LCP ConfAck id=0x2 <asyncmap
0x0> <auth chap MD5> <magic 0x4b96b949>]
Dec 20 18:02:49 localhost pppd[28984]: rcvd [LCP ConfReq id=0x3 <asyncmap
0xa0000> <auth chap MD5> <magic 0xe7eda64a>]
Dec 20 18:02:49 localhost pppd[28984]: No auth is possible
Dec 20 18:02:49 localhost pppd[28984]: sent [LCP ConfRej id=0x3 <auth chap MD5>]
Dec 20 18:02:49 localhost pppd[28984]: rcvd [LCP ConfReq id=0x4 <asyncmap
0xa0000> <auth chap MD5> <magic 0xe7eda64a>]
Dec 20 18:02:49 localhost pppd[28984]: No auth is possible
Dec 20 18:02:49 localhost pppd[28984]: sent [LCP ConfRej id=0x4 <auth chap MD5>]
Dec 20 18:02:49 localhost pppd[28984]: rcvd [LCP ConfReq id=0x5 <asyncmap
0xa0000> <auth chap MD5> <magic 0xe7eda64a>]
Dec 20 18:02:49 localhost pppd[28984]: No auth is possible
Dec 20 18:02:49 localhost pppd[28984]: sent [LCP ConfRej id=0x5 <auth chap MD5>]
Dec 20 18:02:49 localhost pppd[28984]: rcvd [LCP ConfReq id=0x6 <asyncmap
0xa0000> <auth chap MD5> <magic 0xe7eda64a>]
Dec 20 18:02:49 localhost pppd[28984]: No auth is possible
Dec 20 18:02:49 localhost pppd[28984]: sent [LCP ConfRej id=0x6 <auth chap MD5>]
Dec 20 18:02:49 localhost pppd[28984]: rcvd [LCP ConfReq id=0x7 <asyncmap
0xa0000> <auth chap MD5> <magic 0xe7eda64a>]
Dec 20 18:02:49 localhost pppd[28984]: No auth is possible
Dec 20 18:02:49 localhost pppd[28984]: sent [LCP ConfRej id=0x7 <auth chap MD5>]
Dec 20 18:02:49 localhost pppd[28984]: rcvd [LCP ConfReq id=0x8 <asyncmap
0xa0000> <auth chap MD5> <magic 0xe7eda64a>]
Dec 20 18:02:49 localhost pppd[28984]: No auth is possible
Dec 20 18:02:49 localhost pppd[28984]: sent [LCP ConfRej id=0x8 <auth chap MD5>]
Dec 20 18:02:49 localhost pppd[28984]: rcvd [LCP ConfReq id=0x9 <asyncmap
0xa0000> <auth chap MD5> <magic 0xe7eda64a>]
Dec 20 18:02:49 localhost pppd[28984]: No auth is possible
Dec 20 18:02:49 localhost pppd[28984]: sent [LCP ConfRej id=0x9 <auth chap MD5>]
Dec 20 18:02:49 localhost pppd[28984]: rcvd [LCP ConfReq id=0xa <asyncmap
0xa0000> <auth chap MD5> <magic 0xe7eda64a>]
Dec 20 18:02:49 localhost pppd[28984]: No auth is possible
Dec 20 18:02:49 localhost pppd[28984]: sent [LCP ConfRej id=0xa <auth chap MD5>]
Dec 20 18:02:49 localhost pppd[28984]: rcvd [LCP TermReq id=0xb]
Dec 20 18:02:49 localhost pppd[28984]: sent [LCP TermAck id=0xb]
Dec 20 18:02:49 localhost xl2tpd[28973]: handle_avps: dont know how to
handle atribute 46.
Dec 20 18:02:49 localhost xl2tpd[28973]: handle_avps: dont know how to
handle atribute 104.
Dec 20 18:02:49 localhost xl2tpd[28973]: control_finish: Connection closed
to 83.102.254.248, serial 3 (Locally generated disconnect
)
Dec 20 18:02:49 localhost xl2tpd[28973]: Untrustingly terminating pppd:
sending KILL signal to pid 28984
Dec 20 18:02:49 localhost pppd[28984]: Modem hangup
Dec 20 18:02:49 localhost xl2tpd[28973]: pppd 28984 successfully terminated
и так далее....
Конфиги:
/etc/xl2tpd/xl2tpd.conf
[global]
access control = yes
[lac corbina]
lns = tp.spb.corbina.net
redial = yes
redial timeout = 10
require chap = yes
require authentication = no
name = username
ppp debug = yes
pppoptfile = /etc/ppp/options.xl2tpd
require pap = no
autodial = yes
/etc/ppp/options.xl2tp
unit 0
name username
remotename l2tp
ipparam corbina
connect /bin/true
mru 1464
mtu 1464
require-chap
refuse-eap
refuse-pap
refuse-mschap
refuse-mschap-v2
nodeflate
nobsdcomp
persist
maxfail 0
nopcomp
noaccomp
defaultroute
/etc/ppp/chap_secrets
# Secrets for authentication using CHAP
# client server secret IP addresses
l2tp * 5792882 *
* username 5792882 *
/etc/init.d/xl2tpd
case "$1" in
start)
echo -n "Starting $DESC: "
start-stop-daemon --start --quiet --pidfile /var/run/$NAME.pid \
--exec $DAEMON -- $DAEMON_OPTS
echo "$NAME."
# start)
# if !([ -f /var/run/xl2tpd/l2tp-control ]) ; then
# mkdir -p /var/run/xl2tpd
# touch /var/run/xl2tpd/l2tp-control
# fi
# echo -n "Starting $DESC: "
# start-stop-daemon --start --quiet --pidfile /var/run/$NAME.pid \
# --exec $DAEMON -- $DAEMON_OPTS
# echo "$NAME."
route add -host 83.102.254.231 gw 10.X.X.X
route add -host 83.102.254.234 gw 10.X.X.X
route add -host 83.102.254.234 gw 10.X.X.X
route add -host 83.102.254.236 gw 10.X.X.X
route add -host 83.102.254.238 gw 10.X.X.X
route add -host 83.102.254.239 gw 10.X.X.X
route add -host 83.102.254.240 gw 10.X.X.X
route add -host 83.102.254.241 gw 10.X.X.X
route add -host 83.102.254.242 gw 10.X.X.X
route add -host 83.102.254.244 gw 10.X.X.X
route add -host 83.102.254.245 gw 10.X.X.X
route add -host 83.102.254.246 gw 10.X.X.X
route add -host 83.102.254.247 gw 10.X.X.X
route add -host 83.102.254.248 gw 10.X.X.X
route add -host 83.102.254.249 gw 10.X.X.X
route add -host 83.102.254.250 gw 10.X.X.X
route add -host 83.102.254.251 gw 10.X.X.X
route add -host 83.102.254.252 gw 10.X.X.X
route add -host 83.102.254.254 gw 10.X.X.X
route add -host 83.102.254.255 gw 10.X.X.X
route add -host 213.234.192.8 gw 10.X.X.X
route add -host 85.21.192.3 gw 10.X.X.X
;;
--
/aim [ http://aim.pp.ru/ ]
Reply to: