[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: L192WS widescreen



2007/12/25, DrMoriarty <drmoriarty.0@gmail.com>:
> Превед всем.
>
> У меня возникла проблема, собрал другу компьютер с сабжевым монитором,
> поставил на него Etch 4.0 без обновлений. Монитор отказался включаться в
> режиме 1440х900. В интернете прочитал, что широкоформатные мониторы лечат
> обычно вставкой соответствующего Modeline. В xorg.conf внёс такие изменения
>
> Section "Monitor"
> ...
>     UseModes    "MyModes0"
> EndSection
>

HorizSync: 30 - 81
VertRefresh: 56 - 76


> Section "Modes"
>     Identifier    "MyModes0"
>     Modeline "1440x900" 106.50 1440 1488 1536 1840 900 902 905 947 -HSync
> +Vsync
> EndSection
> ...
> Section "Screen"
> ...
>     SubSection "Display"
>         Viewport   0 0
>         Depth     24
>         Modes    "1440x900" "1280x1024" "1024x768"
>     EndSubSection
>
> Включать нужный видео режим монитор всё равно отказался, аргументируя это
> следующей выдержкой из Xorg.0.log
>
> (II) I810(0): Monitor0: Using hsync range of 30.00-83.00 kHz
> (II) I810(0): Monitor0: Using vrefresh range of 56.00-75.00 Hz
> (II) I810(0): Not using mode "1440x900" (no mode of this name)
> (II) I810(0): Not using built-in mode "1920x1440" (width too large for
> virtual size)
> (II) I810(0): Not using built-in mode "1600x1200" (width too large for
> virtual size)
> (II) I810(0): Increasing the scanline pitch to allow tiling mode (1280 ->
> 2048).
> (--) I810(0): Virtual size is 1280x1024 (pitch 2048)
> (**) I810(0): *Built-in mode "1280x1024"
> (**) I810(0): *Built-in mode "1024x768"
> (**) I810(0):  Built-in mode "800x600"
> (**) I810(0):  Built-in mode "640x480"
> (II) I810(0): Attempting to use 75.02Hz refresh for mode "1280x1024" (849)
> (II) I810(0): Attempting to use 75.08Hz refresh for mode "1024x768" (845)
> (II) I810(0): Attempting to use 75.00Hz refresh for mode "800x600" (843)
> (II) I810(0): Attempting to use 75.00Hz refresh for mode "640x480" (841)
> (++) I810(0): DPI set to (100, 100)
>
> Машины этой под рукой нет, но есть с собой конфиг и лог.
> Помогите, кто чем может.
>

В секцию Monitor добавить вменяемые
HorizSync    31.5 - 48.5
VertRefresh  40.0 - 70.0

-- 
Regards,
Yuri Kozlov

Reply to: